• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.1
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.

• Asia Marketing Journal
• /
• v.16 no.4
• /
• pp.19-37
• /
• 2015

Forming interfirm collaborative relationships has become a key aspect of a firm's marketing strategies to create value for customers and achieve greater firm performance. While empirical findings are mixed in previous studies, this study is an effort to identify boundary conditions for the benefits of marketing alliances. We investigate internal and environmental factors that may magnify or constrain the effect of marketing alliances on firm profitability. Given the complementary relationship between marketing and R&D activities, we focus on a firm's R&D intensity as an internal factor that may magnify the value of marketing alliances for firm performance. For environmental factors, we focus on industry turbulence and industry competitiveness. Industry turbulence refers to the degree to which industry market conditions change quickly and unpredictably, whereas industry competitiveness refers to the degree to which a firm faces competition in the industry. By testing these factors, we are intended to reveal boundary conditions that determine the value of marketing alliances for firm profitability. The analysis of firms in the diverse industries shows that while the main effect of marketing alliances on firm profitability is not significant, it becomes more positive when R&D investment is more intensive or when industry environment is more turbulent. The results of this study imply that just forming more marketing alliances may not be enough to increase firm profitability. Our findings imply that marketing alliances become more effective in a dynamically changing industry environment. That is, firms can cope with industry uncertainties more effectively by forming marketing alliances. At the same time, the moderating effect of R&D intensity implies that the internal investments in R&D magnify the effect of marketing alliances on firm profitability. The findings of this study contributes to the existing alliance literature in three aspects. First, this study enhances our understanding of the contingent value of marketing alliances by testing both internal and external factors that may influence the effectiveness of marketing alliances. Second, this study responds to the need for research that investigates actual performance resulting from interfirm relationships. Third, while previous studies primarily focused on a specific industry, this study extend previous findings of the boundary conditions for the benefits of marketing alliances in a broader context.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.449-453
• /
• 2009

This study focused on the content characteristics of regulated hazardous substances in specific wastes. Regulated heavy metal such as Cu, Pb, Cd analyzed the 108 waste samples that it choice from the representative facilities. Analytical method used content test method, suggested on the basis of analytical method of developing country, and the results as compared with limited standard in Austria Petroleum, primary metalworking and electronic industry had high content of Cu more than 100 mg/kg of Austria limited standard. Pb detected high level concentration the sample that dust producted at Primary metalworking industry. In case of total Cr was show that high content at KSIC 18, 19, 23 etc but result analyzed Cr(VI), it was shown that high level at dust producted from sewing clothes and fur industry.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.757-763
• /
• 2020

Objectives: The objective of this study was to evaluate the concentrations of airborne fungi in public transportation from autumnl 2016 to summer 2017. Methods: This study measured the concentrations of airborne fungi on six subway lines and intercity buses in Seoul. Results: The concentration of fungi in the air in public transportation was found to be lower than the standard (500 CFU/㎥) for vulnerable group facilities among public use facities. In summer, the concentration of airborne fungi was relatively higher than in autumn. The concentrations of airborne fungi in subway (252.0 CFU/㎥) and train (45.1 CFU/㎥) were high tendency during non-rush hours in summer, while intercity bus was hightendency during rush hours in summer (111.9 CFU/㎥). The major types of airborne fungi in public transportation were Cladosporium, Penicillium, and Aspergillus. Conclusions: The harmful airborne fungus were detected though they did not exceed the standard in all public transportation. As a result, further studies on the analysis of the distribution of airborne fungi by ventilation and the characterization of indoor environments are needed to propose effective management of airborne fungi in public transportation.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11a
• /
• pp.125-138
• /
• 1999

• Food preservation and processing industry
• /
• v.15 no.1
• /
• pp.12-17
• /
• 2016

• Nuclear industry
• /
• v.5 no.11 s.33
• /
• pp.39-45
• /
• 1985

In some parts of Canada, such as Ontario, the choice between nuclear and coal is clear : the economics, environmental, and public health effects all favour nuclear. It is recognized that the economics of coal depend largely on the price of coal, which in

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.554-554
• /
• 2005

• Journal of Information Technology Services
• /
• v.7 no.1
• /
• pp.151-166
• /
• 2008

The Outsourcing Industry has grown at a swift pace and evolved over time, and the Global IT Outsourcing market has shown signs of a steady growth. In the Korean financial industry, however, IT Outsourcing is not active as that of the advanced countries and there is lack of literature to understand the characteristics of IT Outsourcing in the financial industry. This paper, therefore, analyze the outcomes surveying 40 financial companies in Korea to investigate how IT Outsourcing risk factors affects IT Outsourcing intention. Based on our literature reviews based on number of key articles, journals, and the focus group interviews, IT Outsourcing risk factors are proposed into four different domains: Transaction, Client, Vendor and Environmental perspective. It found that two risk factors (Client and Environmental perspective) are closely related to the IT Outsourcing intention of the Korean financial industry. Finally, this paper concludes that concrete SLAs (Service Level Agreements) of the clients and support of government agencies are important to mitigate the IT Outsourcing risks.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.32-41
• /
• 2012

Objectives: Information of chemical in electronics industry has not been known enough, although workers' health hazards by chemicals in this industry have been regarded serious. The who always contribute to reveal and control the health hazards and risks in electronics industry have not been the industry but the occupational or environmental victims and grassroot organizations. The similar phenomena can be observed in Korea. Methods: The experiences of individual workers on the occuapational safety and health in semiconductor factory were heard separately and integrated with related literatures. Results:: The first part of this article is largely based on the memories and experiences of individual workers of semiconductor factories, mainly from S semiconductor. Common features of those experiences can be a good resource for detail understanding of the workplace, especially under the situation without any transparent disclosure of information by the governments or the companies. The second part of this article deals with several factors to be considered for control of exposure in workplace; characteristics of workplace and workforce, types of chemicals used, and the way of using the chemicals. Then the current social issues on work-relatedness of cancers of S semiconductor workers are presented briefly. Conclusions: As a conclusion, current OSH situations and issues in Korean electronics industry raise the need of changes in OSH culture. General adaptation of precautionary principle, internalization of costs, and extended responsibility of producers are needed urgently. The OSH professionals both in public and private sectors should support these agendas under their social obligation to protect workers' health.