• Korean Business Review
• /
• v.17
• /
• pp.53-81
• /
• 2004

The purpose of this study is to understand the realities and the subject of environmental management for small and medium-sized companies in Gwangwon area, through surveying the present status as to acquiring the certification of ISO14001, and to seek for a plan to facilitate environmental management. Given summarizing key results, those are as follows. First, while the number of companies in our country which acquired the certification of ISO14001, amounts to 1,215 businesses as of April of 2003, the number of small and medium-sized companies in Gwangwon area which obtained the certification of ISO14001 reached only 26 businesses, the lowest level among metropolitan municipalities. Second, for the reason that companies who didn't acquire the certification, strive not to receive the certification, it did present the point that' costs to be needed in acquiring and maintaining the certification are larger than practical benefit. Third, the biggest reason for either companies which did not acquire the certification of ISO14001 or companies which did (try to) acquire the certification of ISO1400, was, enhancement of a corporate image,' and the effect after a company who obtained the certification introduced the environmental management system, was also shown to be 'the improvement of a corporate image.' Fourth, many companies who acquired the certification of ISO1400 pointed out the response related to 'burden on document creation and costs' and 'lack of manpower' as problems when introducing the environmental management system. On the basis of major results of a study as the above, given presenting the subject and a plan for activating the environmental management of small and medium-sized companies in Gwangwon area, those are as follows. First, because most of companies who did not obtain the certification of ISO1400 have low recognition of ISO14001, it needs continuous and positive publicity, education and a training system. Second, it requires to carry out an educational program to nurture professional manpower due to lack of manpower relevant to environmental management, to expand payment of subsidies, to open exclusive-charge department and consulting contact, to have the relevant information be database and to develop software. Third, in order to make the certification obtained through inexpensive costs and simple procedures, it needs to positively consider the creation of public approval system for a small and medium-sized company, group approval system, industrial-complex approval system, and others.

• Steel and Composite Structures
• /
• v.34 no.3
• /
• pp.409-421
• /
• 2020

In the optimized structure sizing, the optimization methods are inserted in this context in order to obtain satisfactory solutions, which can provide more economical structures, besides allowing the consideration of the factors related to the environmental impacts in the structural design. This work proposes a mathematical model for the optimization of steel-concrete composite beams aiming to minimize the monetary cost and the environmental impact, using the Harmonic Search optimization method. Discrete variables were the dimensions of the steel profiles and the thickness of the collaborating slab of the composite steel-concrete beam. The proposed model was implemented in Fortran programming language and based on improvements in the structure of the optimization method proposed by Medeiros and Kripka (2017). To prove the effectiveness and applicability of the model, as well as the Harmonic Search method, analyzes were performed with different configurations of steel-concrete composite beams, in order to provide guidelines that make the use of these systems more streamlined. In general, the Harmonic Search optimization method has proved to be efficient in the search for the optimized solutions, as well as important considerations on the optimization of the monetary and environmental costs of steel-concrete composite beams were obtained from the developed examples.

• Journal of the Korean Regional Science Association
• /
• v.12 no.2
• /
• pp.21-36
• /
• 1996

This thesis focused on the extent of the area-by-area gap of the unit production cost that should be taken into account without exception in supply of the local public goods production cost. With the advent of the local autonomy era, what should be considered in the local governmen's production of the local public goods are the government's fiscal capacity and the environmental difference that shows up in accordance with the area's characteristics. Though with the same level of the fiscal capacity, an occurrence of environmental difference will lead inevitably to the different level of actual supply of the local public goods. The method of analysis used in this thesis was first to bring out implicit price, to combine this with induced expenditure function, to separate demand function parameter and cost function parameter, and then to analyzed the impact of environmental variables on the production cost. The environmental variables were set on the basis of the ones that affected expenditure per person of the public goods. The analysis was conducted in distinction of city areas and county areas. The results showed that, in cases of cities, more production cost of the public goods was in presence in urban areas and in areas where there was sluggish development. In other words, distinction could be drawn between areas where there was a large consumption of production cost resulting from poor environmental sparked by slow development and those where additional costs were required due to population concentration caused by a certain level of accomplished development. In the meantime, in cases of county areas, the results were around the same. However, a comparison between city areas and county ones told that overall difference between city areas was not that big in the production cost while that in county areas was large enough. In times ahead, in implementation of grant-in-aid scheme, production cost index for local public goods could be used as it was written in consideration of environmental characteristics of areas concerned.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.10-18
• /
• 2002

The purpose of this study is to investigate the environmental value of green space in Seoul. Longitudinal relationships between land use patterns and $SO_2/NO_2$ have been analysed. Then the environmental and economic value of green space were examined. In this study, the following results have been found : Firstly, it was found that the amount of $SO_2$ showed the negative relations with green space but had the positive relationships with the built-up area. Which in turn can be interpreted as securing the green space could improve the $SO_2$ purification capacity. Secondly, Seoul Metropolitan green belt zones absorbed 69,728 tones of $CO_2$, 654 tones of $SO_2$ and produced 51,205 tones of O2 at the year of 1997 standpoint. This results implicate that the Seoul Metropolitan green belt zones resolve 0.2% of $CO_2$ and 2.9% of $SO_2$ production in total. Finally, the occurrence of an additional costs of 6,800 Korean Won per household was expected due to the air conditioning cost increases as the green belt areas decrease. Therefore, it is recommended to establish the alternative plans for the protection and creation of the green space in the urban areas, since those urban green space have the significant meaning as their provision of habitats for the wildlife as well as their contribution to the reduction of energy consumption.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.534-539
• /
• 2006

The supply of oxygen for aeration is the largest energy consumer at activated sludge wastewater treatment plants. Replacement of less efficient aeration systems with fine pore aeration devices can save up to 50 percent of aeration energy costs. The purpose of this study was the diagnosis and evaluation of a domestic wastewater aeration system by the off-gas method which had been studied by US EPA and ASCE. For this study, an off-gas analyzer and its hood were made to collect off-gas. Also, a vacuum pump was connected to the analyzer to make suction of off-gas. Experiments were conducted at a domestic activated sludge wastewater treatment plant which had a single spiral roll aeration system installed with P.E tube diffuser. Data on OTE(f), SOTE(pw), OUR, and air flow rate were obtained from these experiments. In case of replacing an aeration system, it is recommended that it should be replaced with perforated membrane disc or ceramic disc fine bubble diffusers installed in a full floor coverage or grid pattern.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.772-782
• /
• 2014

The aim of the study is to examine the factors affecting publicness and efficiency of the regional public hospitals and specify their relationship, thereby drawing out the policy implications for further improvement of regional hospital management. The analytical results showed the followings. First, there were statistically significant mean differences between the above-the-mean group and the below-the-mean group in terms of the internal and external environmental factors and intensity of competition. Second, When the hospitals were divided into two groups based on the mean value of efficiency, the ratio of material costs, of operational costs, and of doctors, and GRDP per capita of the above-the-mean group and the below-the-mean group showed the significant mean differences. Finally, among the variables of publicness, the ratio of medical aid patients and the number of deliveries had the negative relationships with efficiency whereas the medical costs of medical aid recipients had a positive relationship. The general argument that the government should enlarge its support for the regional hospitals' publicness needs to be specified in terms of the particular components of publicness based on this study. Also, to determine the extent of government support, the further research on the external environmental factors that cannot be controlled by the hospitals, for instance, intensity of competition, GRDP per capita, and fiscal self-reliance, should be encouraged.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.5
• /
• pp.23-33
• /
• 2015

In the present study, a ground heat exchanger was installed for each heat source in the system at the site to evaluate ground heat conductivity, constructability, and economic feasibility; the factors considered in the study included ground heat, groundwater, fillers (such as bentonite and pea pebbles) and the shape of the heat exchange pipe (e.g., U and D-U). The aim was to determine the ground heat exchanger appropriate for the geothermal system in the 3rd-phase construction of Incheon International Airport. A comparative cost analysis of the initial costs based on the above information showed that although the initial costs of the regular vertical closed loop-II and modified vertical closed loop were lower than those of the regular vertical closed loop-I, they could not be expected to deliver high economic efficiency from the viewpoint of constructability (filler injection, heat exchange pipe insertion). The initial costs proved to be higher in the case of Geohil.

• Resources Recycling
• /
• v.33 no.3
• /
• pp.3-11
• /
• 2024

This study addressed the cost structure of metallurgical plants for vanadium recovery or production, which were previously planned or implemented. Vanadium metallurgy consists of several sub-processes such as such as pretreatment, roasting, leaching, precipitation, and filtration, in order to finally produce vanadium pentoxide. Here, lots of costs should be spent for such plants, in which these costs are largely divided into CAPEX (Capital Expenditure) and OPEX (Operational Expenditure). As a result, the capacities (feed input rates) and vanadium contents are various along the target projects for this study. However, final production rates and grades of vanadium pentoxide showed relatively small differences. In addition, a noticeable correlation is found between capacities and specific operating costs, in that a steadily decreasing trend is described with a non-linear curve with around -0.3 power. Therefore, for the plant capacity below 100,000 tons per year, the specific operating cost rapidly decreases as the capacity increases, whereas the cost remains relatively stable in the range of 0.6 to 1.2 million tons per year of the capacity. From a technical perspective, effective optimization of the metallurgical process plant can be achieved by improving vanadium recovery rate in the pre-treatment and/or roasting-leaching processes. Finally, the results of this study should be updated through future research with on-going field verification and further detailed cost analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.53-61
• /
• 2019

It is well known there are a lot of undeveloped energy resource in the Arctic circle. As global warming enables the use of Arctic sea routes, the interest in Arctic resource development is increasing. Recently, polar neighbors and developed countries are actively promoting construction project in Arctic circle. However, the issue of environmental pollution caused by Arctic resource development has been raised. Today, environmental issues have a significant impact on the success of the project as well as on the costs of Arctic development projects. Therefore, it is necessary to secure a technology related to energy resource development and transportation for the Arctic resource project. In addition, the establishment of strategy for environmental impact assessment (EIA) is important. This paper shows the characteristics and procedures of EIA for developing Arctic resources, and reviews how to construct the systematically management of the necessary information. This system consists of a database required for environmental impact assessment and its application. The system is expected to be utilized for strategic development projects in the Arctic.

• Journal of Environmental Science International
• /
• v.15 no.7
• /
• pp.635-642
• /
• 2006

Present study evaluated the low-temperature destruction of n-hexane and benzene using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst. The parameters tested for the evaluation of catalytic destruction efficiencies of the two volatile organic compounds(VOC) included input concentration, reaction time, reaction temperature, and surface area of catalyst. It was found that the input concentration affected the destruction efficiencies of n-hexane and benzene, but that this input-concentration effect depended upon VOC type. The destruction efficiencies increased as the reaction time increased, but they were similar between two reaction times for benzene(50 and 60 sec), thereby suggesting that high temperatures are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Similar to the effects of the input concentration on destruction efficiency of VOCs, the reaction temperature influenced the destruction efficiencies of n-hexane and benzene, but this temperature effect depended upon VOC type. As expected, the destruction efficiencies of n-hexane increased as the surface area of catalyst, but for benzene, the increase rate was not significant, thereby suggesting that similar to the effects of the re- action temperature on destruction efficiency of VOCs, high catalyst surface areas are not always proper for economical thermal destruction of VOCs. Depending upon the inlet concentrations and reaction temperatures, almost 100% of both n-hexane and benzene could be destructed, The current results also suggested that when applying the mesh type transition Metal Pt/SS catalyst for the better catalytic pyrolysis of VOC, VOC type should be considered, along with reaction temperature, surface area of catalyst, reaction time and input concentration.