• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.

• Korean Journal of Environmental Agriculture
• /
• v.3 no.1
• /
• pp.52-56
• /
• 1984

In order to evaluate the applicability of two kinds of antibiotic fermentation residues on rice and tomato growth, yield, yield components, and some indicators for plant growing status were checked including analysis of physico-chemical properties of these two antibiotic fermentation residues. The results obtained are as follows: 1) These two antibiotic fermentation residues contain high organic matter ($21.6{\sim}24.2%$), phosphorus ($2900{\sim}4600 ppm$) and exchangeable cations ($55.4{\sim}138.3 meq/100 g$,), showing their pH values of $7.0{\sim}8.0$ range. 2) Both have developed net positive charge rather high and stiffly that exhibits high negative ion adsorption capacities, accordingly showing higher zero point of charges($pH 7.0{\sim}8.0$) than those of common soils. 3) The effect of the two kinds of antibiotic fermentation residues on rice growth was more or less the same comparable to the effect of the other fertilizers applied, showing the maximum yield at the application rate of 40 ㎏/10a. 4) The effect of these antibiotic fermentation residues on tomato growth was also similar to effects on rice plant showing the yield increment upon fertilizer application including two antibiotic fermentation residues but no significant differences among fertilizers. 5) According to the plant growing status, plant height, dry matter, number of effective tillers and grain number per panicle of rice and plant height and fresh weight of plant of tomato showed similar trend with yield of both plants.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.25-32
• /
• 2012

The application of electrical resistivity, which is related to charge mobility, has increased in the field of geotechnical engineering for the detection of underground cavern, faults and subsurface pollution level. The purpose of this study is to investigate the variation of electrical resistivity due to temperature change. Sand-silt mixture specimens prepared in the square freezing nylon cell are frozen in the frozen chamber. Four electrodes are attached on the four side walls of the freezing cell for the measurement of electrical resistance during temperature change. Electrical resistances of sand-silt mixtures with different degrees of saturation (0%, 2.5%, 5%, 10%, 20%, 40%, 60% and 100%) are measured as the temperature of specimens decrease from $20^{\circ}C$ to $-10^{\circ}C$. The electrical resistances determined by Ohm's law are transformed into the electrical resistivity by calibration. Experimental results show that the higher degree of saturation, the lower electrical resistivity at $20^{\circ}C$. Electrical resistivity gradually increases as the temperature decrease from $20^{\circ}C$ to $0^{\circ}C$. For the specimens with the degree of saturation of 15% or higer, electrical resistivity dramatically changes near the temperature of $0^{\circ}C$. In addition, very high electrical resistivity is observed regardless of the degree of saturation if the specimens are frozen. This study provides the fundamental information of electrical resistivity according to the soil freezing and temperature change demonstrates that electrical resistivity be a practical method for frozen soil investigation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.679-689
• /
• 2013

To relieve Green-house Gas Emission is the key issue in urban area. Urban transport policies have focused on the reduction of private car use. The most common of these is Travel Demand Management(e.g., congestion charge, environmental tax, etc.) that forces individuals to reduce their private car use. An alternative way is Mobility Management(MM) that induces individuals to voluntarily change their car use through communications. MM is founded on social psychology theory and focuses on individuals' decision making processes to change their perception and attitude on private car use. Although some researchers have reported the relevance of MM approach, still few researches have explicitly studied on individuals' decision making processes. Therefore, the aims of the paper are to analyze the decision making process of individuals and to provide the basis of introducing MM approach in Korea. Structural equation model(SEM) is applied for the analysis of individuals' decision making process. A empirical study shows that psychological factors such as perception/attitude on global environment or individual norms impact significantly to reduce private car use and accordingly the relevance of introducing MM approach instead of imposing regulations or expanding transport facilities.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.55-72
• /
• 2009

The timing of hydrocarbon generation and expulsion from source rocks can be evaluated by reconstructing the geohistory of the basin using petroleum system modeling. The Tyee basin is generally considered having a high hydrocarbon generation potential For the southern part of the basin, the basin evolution from a structural and stratigraphic points of view, the thermal history, and the burial history were reconstructed and simulated using numerical tools of basin modeling. An evaluation of organic geochemistry for the potential source rocks and the possible petroleum systems were analysed to improve the understanding of the hydrocarbon charge of the basin. Organic geochemical data indicate that the undifferentiated Umpqua Group, mudstones of the Klamath Mountains, and coals and carbonaceous mudstones in the Remote Member and the Coquille River Member are the most potential gas-prone source rocks in the basin. The relatively high maturity of the southern Tyee basin is related to deep burial resulting from loading by the Coos bay strata. And the heating by intrusion from the western Cascade arc also affects to the high maturity of the basin. The maturation of source rocks, the hydrocarbon generation and expulsion were evaluated by means of basin modeling. The modeling results reveal that the hydrocarbon was generated in all potential source rocks and an expulsion only occurred from the Remote Member.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.635-653
• /
• 1999

The present work considers work considers research strategies to address global warming. Specifically, this work considers the development of technologies of importance for the reduction of greenhouse gas emission and, especially, the materials that are critical to these technologies. It is argued that novel materials that are essential for the production of environmentally friendly energy may be developed through a special kind of engineering: interface engineering, rather than through classical bulk chemistry. Progress on the interface engineering requires to increase the present state of understanding on the local properties of materials interfaces and interfaces processes. This, consequently, requires coordinated international efforts in order to establish a strong background in the science of materials interfaces. This paper considers the impact of interfaces, such as surfaces and grain boundaries, on the functional properties of materials. This work provides evidence that interfaces exhibit outstanding properties that are not displayed by the bulk phase. It is shown that the local interface chemistry and structure and entirely different than those of the bulk phase. In consequence the transport of both charge and matter along and across interfaces, that is so important for energy conversion, is different than that in the bulk. Despite that the thickness of interfaces is of an order to a nanometer, their impact on materials properties is substantial and, in many cases, controlling. This leads to the conclusion that the development of novel materials with desired properties for specific industrial applications will be possible through controlled interface chemistry. Specifically, this will concern materials of importance for energy conversion and environmental monitoring. Therefore, there is a need to increase the present state of understanding of the local properties of materials interfaces and the relationship between interfaces and the functional properties of materials. In order to accomplish this task coordinated international efforts of specialized research centres are required. These efforts are specifically urgent regarding the development of materials of importance for the reduction of greenhouse gases. Success of research in this area depends critically on financial support that can be provided for projects on materials of importance for a sustainable environment, and these must be considered priorities for all of the global economies. The authors of the present work represent an international research group economies. The authors of the present work represent an international research group that has entered into a collaboration on the development of the materials that are critical for the reduction of greenhouse gas emissions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.1
• /
• pp.127-136
• /
• 2017

U-City laws are divided into three categories: intellectual laws, information superhighway laws, and integrated operation center laws. Previous studies have suggested that efficient infrastructure operation and management is necessary in Ubiquitous-City (U-City). However, infrastructure is often interpreted differently by different laws. The purpose of this study was to plan for the integrated operation of intelligent service facilities by comprehensively analyzing the law system of domestic intelligent service facilities and problems in operation and management based on this critical mind. For this, present conditions and problems of intelligent service facilities were found through interviews with people who are in charge of the law system and other practitioners. The necessity of integrated use, including city information generated from intelligent service facilities and installment locations, has been demonstrated. Government ministries and local governments have established various information systems using ICT and U-City laws that specify integrated management and operation, but do not clearly specify definitions for the specific responsibility and authority for main agents participating in facility operation. A system is needed to smoothly mediate the relevant divisions so that they can use installed equipment simultaneously for efficient operation in generating city information. This objective of this study was to prepare a unitary law system for efficient installment and management of intelligent service facilities by establishing a logically linked relationship among the relevant laws and regulations. This will provide a foundation for a management system that has an integrated linkage of intelligent service facilities.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1273-1282
• /
• 2018

Recently, active research on the Arctic Ocean has been conducted due to the influence of global warming and new Arctic ship route. Although previous studies already calculated quantitative extent of sea ice using passive microwave radiometers, melting at the edge of sea ice and surface roughness were hardly considered due to low spatial resolution. Since Sentienl-1A/B data in Extended Wide (EW) mode are being distributed as free of charge and bulk data for Arctic sea can be generated during a short period, the entire Arctic sea ice data can be covered in high spatial resolution by mosaicking bulk data. However, Sentinel-1A/B data in EW mode, especially in HV polarization, needs significant radiometric correction for further classification. Thus, in this study, we developed algorithms that can correct thermal noise and scalloping effects, and confirmed that Arctic sea ice and open-water were well classified using the corrected dual-polarization SAR data.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.677-684
• /
• 2022

This study is a basic study to evaluate the ecological environment of Changwon City. The study site was 6 ecotourism districts in Changwon-si, and the ecotourism index was evaluated through direct visits and interviews with the person in charge through preliminary research and various literature data from June to July 2021. There are six ecotourism indicators: climate crisis, air quality improvement, water conservation, natural coexistence, citizen participation, and tourism resource management. When looking at the scores for the six ecotourism areas in Changwon, it received the highest score in the areas of natural coexistence and air quality improvement. However, the ecoregion received the lowest score in the water resource conservation category, indicating that the water resource conservation as a whole was weak. Next, tourism resource management, climate crisis, and citizen participation are at the same level in all regions. As a result of the evaluation through the low-carbon ecotourism index, the Changwon City low-carbon ecotourism certification system should first be operated as a measure to revitalize the ecotourism region. It is necessary to prepare a low-carbon ecotourism level for Changwon City. Second, it is very important to guide and promote ecotourism areas to revitalize ecotourism areas. Lastly, to operate a sustainable eco-environment area, it is necessary to operate using local governance above all else.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.107-117
• /
• 2022

This study aims to examine the relationship between the economic, environmental and social activities of sustainable supply chains and the customer satisfaction and customer retention rate, which are the final results in the supplier's operational performance and the buyer's market performance. The survey was conducted on employees in charge of supply chain management, purchasing company, partner company, and logistics management in the company. The final 193 valid data were analyzed to verify the research hypothesis. The results of the study showed that the economic and social activities of the sustainable supply chain had a positive effect on the supplier performance and the purchaser performance, but environmental activities had a negative effect on the supplier performance. In addition, the purchasing company performance has a positive effect on customer satisfaction and customer retention rate. This study provides a theoretical basis for sustainable supply chain activities to affect the operating performance of suppliers and the market performance of buyers, and suggests implications for enhancing the competitiveness of companies through the performance creation process that affects customer performance.