• Journal of Ecology and Environment
• /
• v.36 no.1
• /
• pp.65-71
• /
• 2013

The concentration of airborne pollen is related to meteorological parameters. The main purpose of this study was to determine the correlation between airborne pollen and meteorological parameters in Ulsan based on sampling from 2010 to 2011. The primary factors of interest were differences in the pollen scattering start date, end date, and peak date, and the fluctuations in pollen concentration. The meteorological parameters that affected the start and peak dates of the pollen season were as follows. For Pinus and Alnus, the dates were correlated with sunshine and an increase in temperature, whereas for Quercus, the dates were correlated with increasing temperature. During the pollen season, Alnus peaked when the temperature was highest and Pinus peaked when the relative humidity was lowest. The concentration of airborne pollen was correlated with meteorological parameters during the sampling period as follows: Pinus, Alnus, and Humulus pollen concentrations were positively correlated with increasing temperature and negatively correlated with rainfall and relative humidity; Humulus pollen concentration was positively correlated with sunshine; and Quercus and Humulus pollen concentrations were positively correlated with wind speed.

• Journal of Korean Society on Water Environment
• /
• v.29 no.4
• /
• pp.504-513
• /
• 2013

Water quality trends for major tributaries (66 sites) in the Yeongsan River basin of Korea were examined for 12 parameters based on water quality data collected every month over a period of 12 months. The complex data matrix was treated with multivariate analysis such as PCA, FA and CA. PCA/FA identified four factors, which are responsible for the structure explaining 78.2% of the total variance. The first factor accounting 27.3% of the total variance was correlated with BOD, TN, TP, and TOC, and weighting values were allowed to these parameters for grade classification. CA rendered a dendrogram, where monitoring sites were grouped into 5 clusters. Cluster 2 corresponds to high pollution from domestic wastewater, wastewater treatment and run-off from livestock farms. For grade classification of tributaries, scores to 10 indexes were calculated considering the weighting values to 3 parameters as BOD, TN and TP which were categorized as the first factor after FA. The highest-polluted group included 10 tributaries such as Gwangjucheon, Jangsucheon, Daejeoncheon, Gamjungcheon, Yeongsancheon. The results indicate that grade classification method suggested in this study is useful in reliable classification of tributaries in the study area.

• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.261-266
• /
• 2004

This study was Performed to classify the acoustic emission(AE) signal due to surface cracking and moisture movement in the flat-sawn boards of oak(Quercus Variablilis) during drying using the principal component analysis(PCA) and artificial neural network(ANN). To reduce the multicollinearity among AE parameters such as peak amplitude, ring-down count event duration, ring-down count divided by event duration, energy, rise time, and peak amplitude divided by rise time and to extract the significant AE parameters, correlation analysis was performed. Over 96 of the variance of AE parameters could be accounted for by the first and second principal components. An ANN analysis was successfully used to classify the Af signals into two patterns. The ANN classifier based on PCA appeared to be a promising tool to classify the AE signals from wood drying.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.1
• /
• pp.13-20
• /
• 2021

A suite of 3D large deformation finite element (FE) analyses was performed to investigate the load transfer mechanism and penetration resistance of spudcan foundations in heterogeneous soil profile consisting of sand and clay. The Elasto-Plastic models following Mohr-Coulomb and Tresca failure criteria were adopted for sand and clay, respectively. The accuracy of the numerical model was validated against centrifuge test measurements. The dense sand behavior with dilation is modeled using the non-associated flow rule. An investigation study consisting of key parameters, which includes variation in soil stratigraphy (sand-clay, sand-clay-sand), strength parameters of sand and clay (��' and su) and normalized height ratio of the sand layer (Hs/D) was conducted to assess the penetration behavior of spudcan. Based on calculated outputs, it was demonstrated that these parameters have a significant influence on the penetration resistance of spudcan. The calculated penetration resistance profiles are compared with the published (sand overlying clay) analytical model. It is confirmed that for the case of two-layer soil, the available theoretical model provides an accurate estimate of peak penetration resistance (qpeak). In the case of three-layer soil, the presence of a third stiff layer affects the penetration resistance profile due to the squeezing of the soil.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.141-149
• /
• 2008

This study aims to understand functional spaces within university dormitory, examine the influences of residential environment factors and personal characteristics on users' satisfaction through what parameters and probability among these parameters and seek improvement methods for dormitory users to live at dormitory as the best residential space through causal analysis of residential space uses at university dormitory based on such a probability. Research methods include theoretical research of architectural space characteristics of university dormitory facilities through literature survey, analysis of satisfaction with spaces and their uses through questionnaire and causal analysis of each residential environment factor after making route model using data obtained from the results of analysis. The results of this study are as follows. Factors affecting residents' satisfaction with cultural activities of residential environment factors are safety, territoriality, interior finishing and complexity and those affecting residents' educational activities are safety and amenity of space. Residential function space of university dormitory must have spatial planning that social activities including individual and small group culture and educational activities from the view of spatial territoriality and flexibility based on safety and amenity and facilities related to continuity and connection of common space and unit residential space should be decentralized rather than centralized.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.3
• /
• pp.17-27
• /
• 2011

Recently, a physically based model of water-table fluctuation due to precipitation is developed based on aquifer water balance model. In the model, it was assumed that the water infiltration into ground surface is advection dominant and immediately reaches to water-table. The assumption may be suited for the sites where the water-table is shallow and/or the permeability of the unsaturated zone is high. However, there are more cases where the model is not directly applicable due to thick and low permeable unsaturated zone. For the low permeability unsaturated zone, the pattern of water flux passing through unsaturated zone is diffusive as well as advective. In this study, to improve the previously developed water-table fluctuation model, we combined the delayed drainage model, which has long been used in well hydraulics, to the water-table fluctuation model. To test the validity of the development, we apply the developed model to 5 different domestic sites. The model parameters are calibrated based on the groundwater hydrograph and the precipitation time series, and the correlation analyses among the parameters are pursued. The overall analyses on the delineated model parameters indicate that the delayed drainage parameters or delay index used in the developed model are able to reveal drainage information in the unsaturated zones.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1491-1495
• /
• 2004

For the evaluation of the mobile robot performance in complex environments, the experimental approach in an actual physical environment has been commonly taken. In the physical experimental approach, however, it is quite difficult to define the proper environment for the evaluation due to the lack of commonly agreed characteristics of the test environment. Particularly the number of combinations of types and physical parameters of the obstacles that the mobile robot is expected to deal with is practically unlimited. In an effort to simplify and improve the effectiveness of the evaluation process, we propose an evaluation method using decomposed environmental elements, where we evaluated the performance of the robot for a small group of simple and decomposed obstacle components, for examples projection and slope, instead of a large group of complicated random obstacles. The paper describes a set of simple obstacle models and performance parameters that we have chosen for the effective evaluation process. As an alternative to the physical experimental evaluation approach, in this paper, we used a virtual evaluation environment where the robot and the physical test environment has been modeled using a commercial multi-body dynamics analysis packaged called RecurDyn.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.584-594
• /
• 2005

The spatio-temporal abundance pattern of algae in Lake Paldang from 2002 to 2004 was investigated. The concentration of chlorophyll a representing algal biomass had fluctuated intensively throughout the year. Among three years, the highest algal biomass was shown in 2002, and typical growth peak of concentration of chlorophyll a was occurred in spring and autumn. There had been frequent rainfall in spring drought period in 2003 and it resulted in the decrease of the algal biomass. The distribution pattern of four algal groups on the surface water of Lake Paldang showed different abundance by season and by water area. In particular, different algal growth characteristics by water areas were observed. Influences of various environmental parameters on algal abundance in four water areas of Lake Paldang were analyzed statistically. From the results of Peason correlation analysis, it was understood that the kinds and affects of environmental parameters were different according to water areas and seasons. Based on the factors analysis of environmental parameters on the concentration of chlorophyll a, stepwise regression models whose independent variables were the factors produced by factor analysis and dependent variable was the concentration of chlorophyll a were derived by water areas and seasons. As a whole, factors related with organics and photosynthesis were revealed to have high affects to algal abundance, whereas limiting nutrients such as phosphorus and nitrogen showed little affect in Lake Paldang.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1018-1023
• /
• 1993

In mechanical structure design area, many FEM (Finite Element Method) packages are used. But the design using FEM packages depends on an iterative trial and error manner and general CAD systems cannot cope with the change of parameters. This paper presents a methodology for building a designing system of a mechanical structure. This system can generate the drawing for a designed structure automatically. It consists of three steps: generation of a structure by selection of the parameters, stress analysis, and generation of a drawing using CAD system. FEM module and parametric CAD module are developed for this system. Inference engine module generates the parameters with a rule base and a model base, and also evaluates the current structure. The parametric design module generates geometric shapes automatically with given dimension. Parametric design is implemented with the artificial intelligent technique. In older to the demonstrate the effectiveness of the developed system, a frame set of bicycle was designed. The system was implemented on an SUN workstation using C language under OpenWindows environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.84-84
• /
• 2000

This paper proposes a new impedance control scheme based on a variable stiffness matrix for a bilateraL teleoperation. In this scheme, stiffness matrix of the impedance model in the slave is modulated based on the distance, measured by an ultrasonic sensor, between the slave and environment. At the same time, the stiffness matrix of the master is also changed accordingly in order for the impedance parameters of the combined system to remain constant The proposed scheme is implemented on a 1-dof master/slave system to perform a simple task. In the experiments, the teleoperator with the impedance parameter modulation shows better performance than one with fixed impedance parameters, especially in reducing task execution time and in avoiding excessive external forces.