• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.1-11
• /
• 2000

The purpose of Computer Aided Design is to design good products as quickly as possible. To do this, it is important to reuse the old designs and build on them. Most engineering designers, therefore. hale studied methods for reusing old designs, and the results of their study hale been applied to new designs Unfortunately, this only involves reuse of geometric data without design knowledge. If they can design products with the geometric data, including design knowledge, of the old designed and share them through the Internet, design efficiency will be improved. In other words, one way to improve designer's productivity is to share design information that includes knowledge and scattered data across design offices. This paper introduces a shared design environment with distributed knowledge-base. A product design environment based on distributed knowledge-base is proposed, which integrates the CORBA, OLE and WWW as the network architecture, a 3D CAD system, and an expert system shell. A design example of the lens barrel of a projection television is implemented to verify the idea.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.260-268
• /
• 2007

Demand for the use of 3D CAD DMU systems over the Internet environment has been increased. However, transmission of commercial 3D kernels has delayed the communication effectiveness due to the kernel size. Light weight CAD geometric kernel design methodology is required for rapid transmission in the distributed environment. In this paper, an assembly data structure suitable for the top-down and bottom-up assembly models has been constructed. Part features are stored without a hierarchy so that they are created and saved in no particular order. In particular, this paper proposes a new assembly representation model, called multi-level assembly representation (MAR), for the PDM based assembly DMU system. Since the geometric kernel retains assembly hierarchy and topological information, it is applied to the web-viewer for the PDM based DMU system. Effectiveness of the proposed geometric kernel is confirmed through various case studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.912-920
• /
• 2002

As computer systems and communication technologies develop rapidly, CSCW(Computer Supported Collaborative Work) system appears nowadays, through which it is available to work on virtual space without any restriction of time and place. Most of CWCS systems depend on a special network and groupware. The systems of graphics and CAD are not so many because they are specified by hardware and application software. We propose a Web-based collaborative CAD system which is independent from any platforms, and develop a 3D solid modeler in the system. This system can be worked in the environment of Client/Server architecture. Clients connect to the design server through Java applet on WWW. The server is implemented by Java application.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.524-526
• /
• 2006

We proposes integrated information system, Service Robot Information System(SRIS), for mobile robot. The system has objectives that can heir efficient management and sharing as support information for mobile service robot like recognition, navigation, manipulation and modeling. This paper introduces the concert and architecture of SRIS. An Implementation is done by using ER based database and CAD modeling which is DXF format. The experimental shows the result of object and environment map matching by SLAM. This system is expected that can help reduce the cost and efforts of information management under multiple mobile robot environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1093-1097
• /
• 2004

We propose 'the haptic primitive' for haptic rendering without the need to solve complicated parametric equations. To develop 'the haptic primitive', we adopted "the God-Object Method" as a haptic rendering algorithm and applied 'Constructive Solid Geometry' to manage haptic objects. Besides being used in the 'ghost library' of $PHANToMTM^{TM}$ our method can be used as a basic component for developing tools and libraries that aim to simplify haptic modeling. It can also be applied to tactile display modules and temporal display modules. Ultimately it can be developed into a one-stop haptic modeling tool that enables the user to more conveniently create a tangible CAD systems or a tangible e-ommerce system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.287-300
• /
• 2022

The introduction of Connected and Automated(CAD) technology has a growing interests especially in areas with low demand for transport, where often the local transport services do not connect to peripheral areas for more efficient and convenient mobility services. However, there are few researches on CAD-based mobility services in areas with low demand for transport. Because current researches are mainly focuses on introduction of CAD-based mobility services in area with high demand for transport such as urban and highway. These two areas have different road environments and these differences require different driving technology especially related to Operational Design Domain(ODD). ODD is important factors for introduction of CAD-based mobility services. Therefore, we compare the road environments of areas with low demand for transport and areas with high demand for transport in terms of ODD. In addition, this paper proposes suggest guidance for the introduction of CAD-based mobility services in areas with low demand for transport such as rural and suburban areas.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.407-411
• /
• 2008

This study was conducted to estimate the economic injury level (EIL) and economic threshold (ET) of the green peach aphid, Myzus persicae, on Chinese cabbage (Brassica campestris var). The changes of biomass of Chinese cabbage and M. persicae density were investigated after introduction of M. persicae at different density (0, 2, 5, 10, 15, and 20 per plant; inoculated at 10d after planting). The densities of M. persicae largely increased from the above initial densities to 0, 92.3, 177.4, 406.9, 440.4, and 471.3 aphids per plant at 18d after the initial inoculation, respectively. The biomass of Chinese cabbage significantly decreased with increasing the initial inoculated density of M. persicae: 602.0, 264.2, 262.0, 109.3, 151.0, and 67.3 g in above plots with different initial densities, respectively. The relationship between cumulative aphid days (CAD) and yield loss (%) of Chinese cabbage was well described by a nonlinear logistic equation. Using the estimated equation, EIL of M. persicae on Chinese cabbage was estimated 25 CAD per plant based on the yield loss 13%, which take into account of an empirical gain threshold 5% and marketable rate 92% of spring Chinese cabbage. Also, ET was calculated at 80% of EIL: 20 aphids per plant. Until a more elaborate EIL-model is developed, the present result may be useful for M. persicae management at early growth stage of Chinese cabbage.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.115-126
• /
• 2021

The purpose of this study is to closely analyze the case of blended-learning in order to provide a diverse and flexible learning environment while maintaining the nature of face-to-face classes, and to identify the learning environment that supports blended-learning in each class step and the educational experience of students. The experience and satisfaction of blended learning were investigated in various ways: course evaluation, LMS activity evaluation, and questionnaire before and after the class. As a result, the blended-learning is better than the traditional face-to-face classes, in providing real-time feedback, opportunities for various interactions, and textual conversations, anytime and anywhere. In addition, as a result of the preliminary survey, as a measure to solve the opinion that concentration was reduced due to problems such as networks and felt uncomfortable in the communication part, the theory and lectures of the design practice class were conducted non-face-to-face. The individual Q&A and feedback were conducted face-to-face and non-face-to-face. As a result of the follow-up survey, it was found that concentration and efficiency could be improved. This opens up possibilities for active use of the online environment in design practice classes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.117-124
• /
• 2012

Due to recent urban maintenance project for the aged towns, the reconstruction of apartments into super-high-rise and high-rise apartment structures has been approved for concentrated use of land, and accordingly the infringement on sunshine for nearby residential area is rising as a social issue. Especially the educational environment conditions according to infringement on sunshine in educational facilities are posing many problems. Accordingly in this study, for such sunshine analysis of educational environment, Auto $CAD^{(R)}$ software has been used to construct the 3D model for the educational facility structures. And with the simulation technique, the windows and the schoolyard of the education facility were set to be the lighting standard surface to take measurements for the sunshine environment of the educational facilities by the minute from 8:00AM until 4:00PM for the sunshine amount by true solar time according to the movement of the sun. Also, the sunshine environment of the education facility according to the damage before/after new construction of apartments was charted, and through comparison with the video produced by sun shadow projection method, the sunshine amount of the educational environment could be verified. In future, it is expected to be efficiently used in the sunshine analysis of education environment utilizing such simulation techniques.

• The Journal of Korea Robotics Society
• /
• v.14 no.2
• /
• pp.139-149
• /
• 2019

In this paper, we present auto-annotation tool and synthetic dataset using 3D CAD model for deep learning based object detection. To be used as training data for deep learning methods, class, segmentation, bounding-box, contour, and pose annotations of the object are needed. We propose an automated annotation tool and synthetic image generation. Our resulting synthetic dataset reflects occlusion between objects and applicable for both underwater and in-air environments. To verify our synthetic dataset, we use MASK R-CNN as a state-of-the-art method among object detection model using deep learning. For experiment, we make the experimental environment reflecting the actual underwater environment. We show that object detection model trained via our dataset show significantly accurate results and robustness for the underwater environment. Lastly, we verify that our synthetic dataset is suitable for deep learning model for the underwater environments.