• 한국의상디자인학회지
• /
• 제25권2호
• /
• pp.83-95
• /
• 2023

The purpose of this study was to identify the effect of skin care salons' decision factors on customer satisfaction and revisit intention during the COVID-19 pandemic. The subjects of this study were 220 women in their 20s to 50s who reside in Seoul and the Gyeonggi-do area and are users of skin care salons. The data was statistically analyzed using SPSS V.25.0 and detailed research results are as follows. For the analysis of this study, frequency analysis, factor analysis, reliability verification, independent sample T-Test, one-way analysis of variance, post hoc test, Duncan test, and regression analysis were conducted. First, as a result of examining whether skin care salon decision factors during the pandemic have a positive (+) effect on customer satisfaction, hygienic environment satisfaction and service environment satisfaction, which are sub-factors of customer satisfaction, had a significant effect on professionalism, kind service, and distance, which are sub-factors of decision factors, and are independent variables. Second, as a result of examining whether skin care salon decision factors during the pandemic have a positive (+) effect on revisit intention, decision factors, which are independent variables, including professionalism, kind service, price, and distance showed significant effects on human revisit intention, As for physical revisiting intention, only kind service, distance, and professionalism showed significant effects, while price did not have a significant effect. Third, as a result of examining whether customer satisfaction during the pandemic has a positive (+) effect on revisiting intention, the service environment satisfaction and hygienic environment satisfaction, which were sub-factors of independent variables, showed significant results for human and physical revisit intentions. In this study, service environment and hygienic environment satisfaction were important variables for skin care salon decision factors. Professionalism and kind service were important for human revisit intention. Therefore, overall service environment, hygiene, and safety should be prioritized to increase revisit intention and efforts must be made to retain and improve customer satisfaction

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1252-1258
• /
• 2000

Koreasat-3 was successfully launched by an Ariane IV launch vehicle on September 5, 1999. Although the primary purpose of the satellite is to replace Koreasat-l, it also can extend its communication service coverage over the Asia-Pacific region. A spacecraft is subjected to severe dynamic loads during launch period. To verify the safety of spacecraft under the launch environment, dynamic tests should be performed such as sine sweep, acoustic and separation shock tests. This paper presents the launch environment test results of Koreasat-3. A total of 188 acceleration responses was measured and compared with the design requirements of components and spacecraft. Dynamic characteristic change was also investigated by comparing between low-level pre/post vibration results. From the review of test results, it is concluded that Koreasat-3 was designed and manufactured with the margin of safety enough to survive the launch loads of Ariane IV.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1875-1880
• /
• 2011

This paper proposes a battery model applicable to Autonomie environment. Also, a various of experiment is implemented for validation. The proposed battery model modifies Randles equivalent circuit and battery parameters are extracted from pulsed current tests. The parameters are two-dimensional function of current and SOC(State of Charge). The battery model is developed in the Matlab/Simulink and is implemented for NiMH Panasonic HHR650D and compared with pulsed current discharge curves. The simulation results validate the accuracy of the proposed model and the model is also tested by adding it on Autonomie for HEV application. Constant current charge/discharge, pulsed current test that can be used to extract battery parameter are performed and test results are used to build up the proposed battery model for Autonomie.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.140-145
• /
• 2015

An on-board reaction wheel is payload of small satellite for space environment test. The reaction wheel is designed for considering physical, electrical, and environmental requirements. In this paper, we report design, manufacturing process and operation performance verification. Furthermore, the specifications of environmental test are performed under environmental conditions for guarantee of stability and reliability. The operation and environment test results are presented to meet the requirements at the reaction wheel flight model.

• 한국대기환경학회지
• /
• 제13권3호
• /
• pp.215-220
• /
• 1997

CNG dual fuel engine for heavy duty diesel engine developed by AFS International in Canada has been equipped to a Korean city bus engine and tested to compare the engine performance and the emission characteristics with the existing diesel fueled engine. Also the dual-fuel engine was applied to the city bus for road test. The results are summarized as follows. Performance optimization has been carried out to have engine power equivalent to or better than the diesel fueled engine. Smoke is decreased by 85% by Korean smoke 3 mode test. By 13 mode test CO is increased by 453% and THC is increased by 2, 086%. NOx is decreased by 7% in laboratory. D-13 test mode was changed in 1996 Korean regulation. Even though THC is increased very much, it's not too serious problem since CO and HC emission of diesel engine is very little compared to gasoline engine and more than 75% of THC is CH$_4$. But the reduction technologies of CO and HC has to be considered.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• 대한지하수환경학회지
• /
• 제7권1호
• /
• pp.20-23
• /
• 2000

양수시험시 획득되는 회복자료만을 이용하여 저유계수를 추정하는 일반해를 제시하였다. Banton and Bangoy(1996)가 제시한 단 단계(single-step) 양수시험에서 얻는 회복자료를 이용한 저유계수 추정해를 일반적인 다단계 (multi-step)시험 회복자료에도 적용 가능하게 확장한 것이다. 본 연구에서 구한 일반 해를 이용하여 저유계수와 투수계수를 구한 결과 다른 방법으로 구한 결과 값과 잘 일치하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.185-186
• /
• 2010

본 연구에서는 해양환경하에서 Mega Foundation용 고내구성 콘크리트를 개발하고 개발된 콘크리트의 성능 평가를 위해 Mock Up Test를 수행하였다. Mock Up Test를 위해 국내외 최대규모인 $4m{\times}4m{\times}4m$의 Mock Up 구조물 2개를 제작하였으며, 각 구조물에 각기 다른 배합의 콘크리트 및 타설시간 등을 고려하여 다양한 인자의 영향성 분석을 수행하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.281-291
• /
• 2011

This paper presents an accelerated life test of booster pump for home water purifier. The failure analysis shows that decreased flux due to the plastic deformation of bypass spring adjusting pressure is the predominant failure mechanism. An accelerated life test is designed and implemented to estimate the lifetime of the booster pump. Temperature, water pressure and voltage are selected as accelerating variables through the technical review about failure mechanism. It is assumed that the lifetimes of booster pumps follow lognormal distribution and the combination model of temperature and non-thermal stresses holds. The life-stress relationship, acceleration factor, and $B_{10}$ life at design condition are estimated by analyzing the accelerated life test data.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1237-1242
• /
• 2012

No matter how low it might be, noise from home appliances in indoor environment cause displeasure for residents as it is produced nearby. Electronic goods including vacuum cleaner and washing machine generate high frequency noise, which interrupts TV-watching or conversations and cause noises between floors in apartment houses. In particular, refrigerators make constant noise late at night, hampering the study for exams and causing sleeplessness. Korea, despite the government's efforts to promote low-noise goods based on the noise test by corporation, there is a lack of standardization in the test method, test condition and measuring equipments. This is a major reason that lowers the reliability of low-noise products. At present, low-noise home appliances are certified with eco labeling in the nation but, only 7 brands of refrigerators, 4 brands of washing machines and 97 brands of air-conditioners obtained certification as of august, 2011. In addition, none of Kimchi-refrigerator and vacuum cleaner brands were approved as low-noise home appliances. This shows Korea's relatively underdeveloped market for low-noise products, which, in part, is because of the difficulties companies face in being certified with eco labeling as they should satisfy various requirements such as power-saving and eco-friendly design besides low-noise features. As a result, low-noise labeling for home appliances should be established for the revised noise and vibration management law and the study was carried out to establish low-noise labeling system for major noise sources including vacuum cleaner, washing machine, air-conditioner and refrigerator.