• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.604-609
• /
• 2019

In this study, we fabricated a capacitive humidity sensor with interdigitated (IDT) electrodes using a thermosetting polyimide as a humidifying material. First, the number of electrodes, thickness, and spacing of the polyimide film were optimized, and a mask was designed and fabricated. The sensor was fabricated on a silicon substrate using semiconductor processing equipment. The area of the sensor was $1.56{\times}1.66mm^2$, and the width of the electrode and the gap between the electrodes were each $3{\mu}m$. The number of electrodes was 166, and the length of an electrode was 1.294 mm for the sensitivity of the sensor. The sensor was then packaged on a PCB for measurement. The sensor was inserted into a chamber environment with a temperature of $25^{\circ}C$ and connected to an LCR meter to measure the change in capacitance at relative humidity (RH) of 20% to 90%, 1 V, and 20 kHz. The results showed a sensitivity of 26fF/%RH, linearity of < ${\pm}2%RH$, and hysteresis of < ${\pm}2.5%RH$.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.257-263
• /
• 2018

This study is to develop a GSTM (Green infrastructure Surface Temperature Measurment) equipment for reducing the surface temperature of GI by using LID Method. The tests were conducted including GI products such as Greening block, Pervious Block, Soil Block and so on. The GSTM equipment developed by considering the literature surveys are characterized as follows. The non-contact infrared temperature sensor was used to measure the surface temperature, and it was improved to measure the overall average temperature including the center and the corner temperature of the specimen. The developed GSTM equipment was used to compare performance of asphalt and GI products. As a result, the Greening Block show a high difference of $18.4^{\circ}C$ and it contributes to the decrease of surface temperature.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.396-403
• /
• 2018

In this paper, a high-performance and low-noise centrifugal fan is developed for cooling automotive seats which provide a driver with pleasant driving environment. First, the flow characteristics of the existing fan unit was analyzed using a fan performance tester and CFD (Computational Fluid Dynamics) simulations. The analysis of the predicted flow field indicated vortex flow near the tip of fan hub and stagnation flow on the top of fan hub. Two design points are devised to reduce the vortex flow and the stagnation flow observed in the existing fan unit. First, the cut-off clearance which is the minimum distance between the fan blade and the fan housing is increased to reduce the vortex strength and, as a result, to reduce the overall sound pressure level. Second, the hub shape is more modified to eliminate the stagnation flow. The validity of proposed design is confirmed through the numerical analysis. Finally, a prototype is manufactured with a basis on the numerical analysis result and its improved flow and noise performances are confirmed through the P-Q curves measured by using the Fan Tester and the SPL (Sound Pressure Level) levels measured in the anechoic chamber.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

The objective of this work is to prove a possibility of void f illing through a carbonation f or the purpose of improving the quality of recycled aggregate. Carbonation can permanently immobilize CO2, which is a greenhouse gas, and thus provides additional benefit on environment. In this work, recycled fine aggregate was reacted using gaseous CO2 and supercritical CO2(scCO2) in a closed chamber, and the changes in physical properties of the recycled f ine aggregate bef ore and af ter carbonation were analyzed using the apparent density, skeletal density, pH, and FE-SEM measurements. Thereafter, a mortar specimen was prepared and a compressive strength was measured. According to the experimental results, it was found that the increase in the apparent density and the true density was higher by the reaction with scCO2, which was conducted at high temperature and high pressure compared to the reaction with gaseous CO2. In addition, the pH of the eluted water was found to have a larger initial decrease than that observed with samples from reaction by gaseous CO2. The shape and amount of calcium carbonate crystals were also found to be larger than that from gaseous CO2. The increase in compressive strength was the largest when using recycled fine aggregate reacted with scCO2. It was clear that quality improvement of recycled fine aggregate was higher with scCO2 than with gaseous CO2.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.51-58
• /
• 2021

South Korea, as the 10th country to join the Artemis program led by NASA, is actively supporting various researches related to the lunar exploration. In particular, the utilization of water as a resource in the Moon has been focused since it was discovered that ice exists at the lunar pole as a form of frozen soil. Information on the thermal conductivity of lunar regolith can be used to estimate the existence for ice water extraction by thermal mining. In this study, the vacuum pressure effect on thermal conductivity of KLS-1 was investigated with a DTVC (Dusty Thermal Vacuum Chamber). The reliability of KLS-1 was reconfirmed through comparison with thermal conductivity of known standard lunar regolith simulants such as JSC-1A. An empirical equation to assess thermal conductivity considering dry unit weight and vacuum pressure was proposed. The results from this study can be implemented to simulate lunar cryogenic environment using the DTVC.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1760-1770
• /
• 2022

Objective: It is crucial to accurately determine the net energy (NE) values of feed ingredients because the NE system is expected to be applied to the formulation of broilers feed. The NE values of 5 wheat and 5 wheat brans were determined in 12-to 14-day old Arbor Acres (AA) broilers with substitution method and indirect calorimetry method. Methods: A total of 12 diets, including 2 reference diets (REF) and 10 test diets (5 wheat diets and 5 wheat bran diets) containing 30% of test ingredients, were randomly fed to 864 male AA birds with 6 replicates of 12 birds per treatment. These birds were used to determine metabolizable energy (ME) (8 birds per replicate) in the chicken house and NE (4 birds per replicate) in the chamber respectively at the same time. After a 4-d dietary and environment adaptation period, growth performance, energy values, energy balance and energy utilization were measured during the following 3 d. Multiple linear regression analyses were further performed to generate prediction equations for NE values based on the chemical components and ME values. The NE prediction equation were also validated on another wheat diet and another wheat bran diet with high correlation (r = 0.98, r = 0.75). Results: The NE values of 5 wheat and 5 wheat bran samples are 9.34, 10.02, 10.27, 11.33, and 10.49 MJ/kg, and 5.37, 5.17, 4.87, 5.06, and 4.88 MJ/kg DM, respectively. The equation with the best fit were NE = 1.968AME-0.411×ADF-14.227 (for wheat) and NE = -0.382×CF-0.362×CP-0.244×ADF+20.870 (for wheat bran). Conclusion: The mean NE values of wheat and wheat bran are 10.29 and 5.07 MJ/kg DM in AA broilers. The NE values of ingredients could be predicted by their chemical composition and energy value with good fitness.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.125-134
• /
• 2022

The Global Expansion Roadmap published by the International Space Exploration Coordination Group, which is organized by space agencies around the world, presents future lunar exploration guidance and stresses a lunar habitat program to utilize lunar resources. The Moon attracts attention as an outpost for deep space exploration. Simulating lunar surface environments is required to evaluate the performances of various equipment for future lunar surface missions. In this paper, an experimental study was conducted to simulate high vacuum pressure and cryogenic temperature of the permanent shadow regions in the lunar south pole, which is a promising candidate for landing and outpost construction. The establishment of an efficient dirty thermal vacuum chamber (DTVC) operation process has never been presented. One-dimensional ground cooling tests were conducted with various vacuum pressures with the Korean Lunar Simulant type-1 (KLS-1) in DTVC. The most advantageous vacuum pressure was found to be 30-80 mbar, considering the cooling efficiency and equipment stability. However, peripheral cooling is also required to simulate a cryogenic for not sublimating ice in a high vacuum pressure. In this study, an efficient peripheral cooling operation process was proposed by applying the frost ratio concept.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.131-132
• /
• 2003

Leaf discs and apical meristems were cultured in Murashige and Skoog (MS) medium supplemented with cytokinin and auxin at different concentrations. Callus production was observed in all tested media after six days of incubation. Callus produced in the presence of high concentration of NAA (2.0mg/1) was fragile in texture and yellow in colour. Highest callus formation was observed from leaf discs in the medium supplemented with 1.0mg/1 NAA and 0.5 mg/l BAP in dark at $25{\pm}1{\circ}C$. Percentage of callus formation was 95% and mean callus fresh weight was 654.88 43.53 mg. Shoots were induced from the callus after 4 weeks in 1/2MS medium supplemented with BAP and kinetin both at 0.5mg/1. When elongated shoots were separated and transferred into multiplication medium (MS+0.5mg/1 BAP+0.5mg/1 kinetin) multiplication rate was 6.4 after 6 weeks. Higher concentrations of BAP caused callus production at the base. Direct shoot induction was observed from apical meristems in MS medium in the presence of 0.175 mg/1 IAA + 2.25mg/1 BAP and 0.175 mg/1 IAA + 3.0 mg/1 BAP in 16 hour day at $25{\pm}1{\circ}C$. Explants (apical meristems) elongated to form a single shoot forming a callus at the base. Adventitious buds were sprouted out from the base. Percentage explants which producing shoots was 28.57 and 65.5 respectively. Multiple shoot induction was also observed in the same media. Highest multiple shoot production was observed in the presence of 0.175 mg/l IAA and 3.0mg/l BAP, Mean number of shoots per explant was 5.36 and the mean shoot length was $16.66{\pm}4.15$mm. Shoots (20 30m length) were tested for root induction. Excised shoots were transferred into rooting media, which contains different concentrations of NAA and IAA. Best rooting performance was observed in 1/2MS medium supplemented with 0.1mg/1 NAA after 10 days of incubation in 16 hr photoperiod at $25{\pm}1{\circ}C$. Mean number of roots per shoot was 6 and the mean root length was 252mm. Rooted plantlets were transferred into sterile coir dust:sand (1:4) mixture and maintained in a humid chamber for two weeks, They were gradually exposed to the natural environment. After three weeks they were transferred to pots containing coir dust:sand (1:2) mixture for further development where the 90% survival was observed.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.39-48
• /
• 2024

A car horn serves a crucial safety role as a means of communication between drivers and a part that alerts pedestrians in advance. While previous studies have utilized finite element method and electric circuit model to simulate and analyze characteristics of the car horns, there remains a lack of research on design methods of a trumpet horn. This paper presents a design approach that predicts the operating frequency based on the acoustic reactance at the throat of the horn, once the vibrating part is determined. We deal with a horn combining both an exponential horn and a waveguide in the acoustic section, and confirm that the acoustic reactance at the horn throat measured by impedance tube experiment agrees well compared with the numerical result obtained using the finite element method. The resonance frequency of the car horn is predicted using the COMSOL Multiphysics finite element numerical analysis model, and the proposed design method is validated by measuring the operating frequency of the designed horn in a sound pressure experiment. As a result, the resonance measured in a semi-anechoic chamber environment by applying a DC voltage of 12 [V] excluding the holder occurs accurately within a few [Hz] of the design operating frequency. This paper discuss the design method of a trumpet horn from the perspective of the horn's acoustic reactance, and is expected to be useful for designing horn systems.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.55-66
• /
• 2000

A U.S EPA Synthetic soil matrix was used for reference neat soil and pyrene contaminated soil. For the contaminated soil, 4.79 wt.% pyrene was dissolved completely into the djchlorornethane, and the soil was evenly soaked with the pyrene solution. The contaminated soil samples(50$\pm$0.5mg) were heated in a modified electrical screen heater reactor which consisted of a thin stainless foil (3.5cm$\times$13cm$\times$0.00254cm, 302 stainless steel shim), two electrodes, and a 20cm dia. $\times$30cm tall cylindrical Pyrex chamber sealed at both ends by aluminum flanges. The heating rate and time conditions were selected as $455^{\circ}C$ @ $1137^{\circ}C$ /s, $760^{\circ}C$ @ $950^{\circ}C$ /s and $977^{\circ}C$ @ $977^{\circ}C$/s. Tar samples after heating the soils were collected on the aluminum foil funnel and a glass filter paper (25mm dia. filter paper) The tar sample and remnant soil on the reactor were extracted with dichloromethane covering the filters, foils and soil by sonicating each in the waterbath for 10 minutes. The extractions were run on a HPLC. At the low peak temperature(about $455^{\circ}C$ @ $1137^{\circ}C$/s) the color of tar was "white", at the middle peak temperature (about 76$0^{\circ}C$ @ 95$0^{\circ}C$/s) the color of tar was "pink brown", at the high peak temperature (about 977$^{\circ}C$ @ 977$^{\circ}C$/s) the color of tar was "dark brown". Cyclopeta(cd)pyrene (CPEP) , which is an interesting species due to mutagenic effect on human cells, was detected in tar samples only above the middle peak temperature. This species was not detected at the low peak temperature. Six isomers of bipyrene were detected. Phenanthrene(C$_{14}$ $H_{10}$) and cyclopenta(def)phenanthrene(C$_{15}$ $H_{10}$) were also detected, but their content was very small relative to the other listed compounds.to the other listed compounds.