• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.743-753
• /
• 2012

The hydrologic models, capable of simulating groundwater recharge for long-term period and effects on it of crops management in the agricultural areas, have been used to compute groundwater recharge in the agricultural fields. Among these models, the Soil and Water Assessment Tool (SWAT) has been widely used because it could interpret hydrologic conditions for the long time considering effects of weather condition, land uses, and soil. However the SWAT model couldn't represent the spatial information of Hydrologic Response Unit (HRU), the SWAT HRU mapping module was developed in 2010. With this capability, it is possible to assume and analyze spatio-temporal groundwater recharge. In this study, groundwater recharge of rate for various crops in the Mandae stream watershed was estimated using SWAT HRU Mapping module, which can simulate spato-temporal recharge rate. As a result of this study, Coefficient of determination ($R^2$) and Nash-Sutcliffe model efficiency (NSE) for flow calibration were 0.80 and 0.72, respectively, and monthly groundwater recharge of Mandae watershed in Haean-myeon was 381.24 mm/year. It was 28% of total precipitation in 2009. Groundwater recharge rate was 73.54 mm/month and 73.58 mm/month for July and August 2009, which is approximately 18 times of groundwater recharge rate for December 2009. The groundwater recharges for each month through the year were varying. The groundwater recharge was smaller in the spring and winter seasons, relatively. So, it is necessary to enforce proper management of groundwater recharge during droughty season. Also, the SWAT HRU Mapping module could show the result of groundwater recharge as a GIS map and analyze spatio-temporal groundwater recharge. So, this method, proposed in this study, would be quite useful to make groundwater management plans at agriculture-dominant watershed.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.36-42
• /
• 2009

A series of heavy rainfall, typhoon and earthquake disasters caused a proportionately large number of deaths among the elderly in the year 2004 in Japan. In response to these tragedies, the national government set up committees to reduce damage within the disaster vulnerable population for the next three years. The discussions in the committee led to a new conceptualization that disaster vulnerability was caused by a lack of interaction between a person's special needs and the environment's capacity and resources to meet them. This person-in-environment model of hazard vulnerability was applied to those who resided in the Nankai-Tonankai tsunami hazard-prone area. 123 home care service users were interviewed in terms of their self-evacuation ability, degree of social isolation, and building weakness as well as tsunami exposure risks. Results were quantified and scores of person-in-environmentmodel hazard vulnerability were obtained. These scores were then used to visualize socially created vulnerability by means of weighted kernel density mapping of both persons with special needs (PSN's) and persons with special needs at times of disaster (PSND's).

• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.231-243
• /
• 2021

In this paper, a dynamic response mapping model of the wheel-rail system is established by using the support vector regression (SVR) method, and the hierarchical safety thresholds of the subgrade void are proposed based on the reliability theory. Firstly, the vehicle-track coupling dynamic model considering the subgrade void is constructed. Secondly, the subgrade void area, the subgrade compaction index K30 and the fastener stiffness are selected as random variables, and the mapping model between these three random parameters and the dynamic response of the wheel-rail system is built by using the orthogonal test and the SVR. The sensitivity analysis is carried out by the range analysis method. Finally, the hierarchical safety thresholds for the subgrade void are proposed. The results show that the subgrade void has the most significant influence on the carbody vertical acceleration, the rail vertical displacement, the vertical displacement and the slab tensile stress. From the range analysis, the subgrade void area has the largest effect on the dynamic response of the wheel-rail system, followed by the fastener stiffness and the subgrade compaction index K30. The recommended safety thresholds for the subgrade void of level I, II and III are 4.01㎡, 6.81㎡ and 9.79㎡, respectively.

• Journal of Environmental Policy
• /
• v.10 no.1
• /
• pp.49-70
• /
• 2011

The numerous efforts have been made in understanding generation and transportation mechanism of nonpoint source pollutants from agricultural areas. Also, the water quality degradation has been exacerbated over the years in many parts of Korea as well as other countries. Nonpoint source pollutants are transported into waterbodies with direct runoff and baseflow. It has been generally thought that groundwater quality is not that severe compared with surface water quality. However its impacts on groundwater in the vicinity of stream quality is not negligible in agricultural areas. The SWAT model has been widely used in hydrology and water quality studies worldwide because of its flexibilities and accuracies. The spatial property of each HRU, which is the basic computational element, is not presented. Thus, the SWAT HRU mapping module was developed in this study and was applied to the study watershed to evaluate recharge rate and $NO_3-N$ loads in groundwater. The $NO_3-N$ loads in groundwater on agricultural fields were higher than on forests because of commercial fertilizers and manure applied in agricultural fields. The $NO_3-N$ loads were different among various crops because of differences in crop nutrient uptake, amount of fertilizer applied, soil properties in the field. As shown in this study, the SWAT HRU mapping module can be efficiently used to evaluate the pollutant contribution via baseflow in agricultural watershed.

• Korean Journal of Health Education and Promotion
• /
• v.29 no.5
• /
• pp.125-133
• /
• 2012

Objectives: We used participatory mapping as a tool for empowerment training for promoting health and safety of farmers. We would like to introduce the application of participatory mapping method and report our experiences in a rural community in Korea. Methods: A one-day workshop was offered in six rural villages which were designated as 'safe farm zones'. Each workshop started with an orientation session, followed by a village rounding, presentations of best cases, a group exercise to draw and present a healthy village map. Participants were requested to express their ideas and experiences about healthy and safe residential and working environments on their map. Results: A total of 206 farmers(100 male, 106 female) participated in the workshops. In each workshop, an average of 34.3 farmers participated, and their mean age was 59 years. In the six workshops, the participants proposed a total of 137 action plans. The action plans included improvement of co-working condition, building facilities for recreation, improving traffic safety measures, and improving residential environment. Conclusions: Participatory mapping was successfully developed and applied as a tool for empowering Korean farmers. The participants were able to express their ideas and thoughts about healthy and safe village and action plans on the map. Moreover, some of the actions in the action plans were carried out immediately after workshop.

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.21-31
• /
• 2010

Recently e-business such as online financial trade and online shopping using mobile computes are widely spread. Most of mobile computers use NAND flash memory-based storage devices for storing data. Flash memory storage devices use a software called flash translation layer to translate logical address from a file system to physical address of flash memory by using mapping tables. The legacy FTLs have a problem that they must maintain very large mapping tables in the RAM. In order to address this issues, in this paper, we proposed a new caching scheme of mapping tables. We showed through the trace-driven simulations that the proposed caching scheme reduces the space overhead dramatically but does not increase the time overhead. In the case of online transaction workload in e-business environment, in particular, the proposed scheme manifests better performance in reducing the space overhead.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.3
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.973-980
• /
• 1988

This two-part paper presents a control method that allows for stable interaction of a robot manipulator with the environment. In part 1, we focus on the input ouput relationships (unstructured modeling) of the robot and environment dynamics. This analysis leads to a general condition for stability of the robot and environment taken as a whole. This stability condition, for stable maneuver, prescribes a finite sensitivity for robot and environment where sensitivity of the robot(or the environment) is defined as a mapping forces into displacement. According to this stability condition, smaller sensitivity either in robot or in environment leads to narrower stability range. In the limit, when both systems have zero sensitivity, stability cannot be guaranteed. These models do not have any particular structure, yet they can model a wide variety of industrial and research robot manipulators and environment dynamic behavior. Although this approach of modeling may not lead to any design procedure, it will allow us to understand the fundamental issues in stability when a robot interacts with an environment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.11
• /
• pp.941-949
• /
• 1989

This two-part paper presents a control method that allows for stable interaction of a robot manipulator with environment. In part 1, we focus on the input output relationships (unstructured modeling) of the robot and environment dynamics. This analysis leads to a general condition for stability of the robot and environment taken as a whole. This stability condition, for stable maneuver, prescribes a finite sensitivity for robot and environment where sensitivity of the robot (or the environment) is defined as a mapping forces into displacement. According to this stability condition, smaller sensitivity either in robot or in environment leads to narrower stability range. In the limit, when both systems have zero sensitivity, stability cannot be guaranteed. These models do not have any particular structure, yet they can model a wide variety of industrial and research robot manipulators and environment dynamic behavior. Although this approach of modeling may not lead to and design procedure, it will allow us to understand the fundamental issues in stability when a robot interacts with an environment.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.207-220
• /
• 2021

Recent advances in new media for sensory experiences keep expanding visual expression methods in installation art such as projection mapping and virtual reality. Artists can create and develop visual expression techniques based on such new media. Projection mapping is a new medium that continues to add various possibilities to visual expression in media art. Under the projection mapping environment, artists can recompose the object or space with the digital content by projecting video onto three-dimensional surfaces in the space. This paper focuses on the process where visual expression with the projection mapping technology leads to viewers' sensory experience. To this end, "reproducibility," "dissemination," "virtuality," and "interactivity" of media were analyzed to describe the meaning and *definition of visual expression. Artworks are considered as an example to study visual expression techniques such as "repetition and overlap," "simulacrum and metaphor," and "displacement and conversion." I applied the analysis and created Domino, a projection mapping artwork, which helps the research on visual expression techniques that can lead to sensory experience the extensibility of visual expression.