• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.603-609
• /
• 2017

In the deployable solid surface antennas, the effects on the performances of antenna due to the structural errors that occur during the deployment are analyzed. The deployable solid surface antennas employed in a satellite are launched in folded configuration and those are deployed in the space environment, and the effects on the antenna performance are calculated depending on the type of surface errors. When the deviation error occurs in one panel, the degradation of performance appears in the side where the incomplete deployment of panel occurs. By assuming that the panel error distribution is in cosine function, the effect of errors are calculated and analyzed with regard to the types and the magnitude of the error. If the antena panel error is uniform, the gain is reduced and pattern is symmetric. For the panel error of cosine 1 or 3 cycle, the main lobe tilts while the pattern is symmetric and the gain reduces for 2 or 4 cycle error.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.423-432
• /
• 2011

Recently, OpenFlow has been paid attention to as a fundamental technology which provides a function of virtualization and programmability in network. In Korea, deployment of OpenFlow networks in campuses and the interconnection between them through tunneling in layer 3 has been performed. However, the performance of the interconnected networks is decreased due to delay in IP layer. In this paper, we design and deploy nation-wide, not local, OpenFlow networks in a pure layer 2 environment over KREONET. After that, we do end-to-end Round-trip Time measurements and TCP/UDP performance tests in OpenFlow and normal networks, and do comparison and analysis on the test results. The results show that the nation-wide OpenFlow networks provide equal performance to normal networks except for the initial packet loss for UDP streaming. In regards to the performance decrease due to early UDP packet loss, we can mitigate it by implementing exceptional procedures in a controller which deal with the same continuous "Packet_in" events.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.207-215
• /
• 2024

Cloud computing is now used by most companies, business centres and academic institutions to embrace new computer technology. Cloud Service Providers (CSPs) are limited to certain services, missing some of the assets requested by their customers, it means that different clouds need to interconnect to share resources and interoperate between them. The clouds may be interconnected in different characteristics and systems, and the network may be vulnerable to volatility or interference. While information technology and cloud computing are also advancing to accommodate the growing worldwide application, criminals use cyberspace to perform cybercrimes. Cloud services deployment is becoming highly prone to threats and intrusions. The unauthorised access or destruction of records yields significant catastrophic losses to organisations or agencies. Human intervention and Physical devices are not enough for protection and monitoring of cloud services; therefore, there is a need for more efficient design for cyber defence that is adaptable, flexible, robust and able to detect dangerous cybercrime such as a Denial of Service (DOS) and Distributed Denial of Service (DDOS) in heterogeneous cloud computing platforms and make essential real-time decisions for forensic investigation. This paper aims to develop a framework for digital forensic for the detection of cybercrime in a joined heterogeneous cloud setup. We developed a Digital Forensics model in this paper that can function in heterogeneous joint clouds. We used Unified Modeling Language (UML) specifically activity diagram in designing the proposed framework, then for deployment, we used an architectural modelling system in developing a framework. We developed an activity diagram that can accommodate the variability and complexities of the clouds when handling inter-cloud resources.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.106-114
• /
• 2015

Despite a series of various developments in underwater acoustic sensor networks, there are still occasions of loss of connection over the network. Because sufficient amounts of drawbacks causing disconnections posed particularly in the middle of connection over the network emerge in the ocean environment, there is a need of new testing mechanism for underwater acoustic networks. In this paper, we proposed to investigate the most vital parts of the network deployment whether they function well in order, without any failure so as to identify where exactly communication process problems and failures are. We introduce step-wised out-test mechanism for UWASNS and accomplished the mechanism by implementing experiments and rigorously checked all the underwater devices utilizing out-test function. Experimental results and out-test function are evinced by implementing, in order to explain our system and conclude with possible future improvements.

• Journal of Information Technology Services
• /
• v.19 no.4
• /
• pp.63-84
• /
• 2020

With the recent announcement of the WCAG2.2 Work Draft of the W3C, revision of the WCAG2.2 guidelines will be made soon. Consequently, the revision of KWCAG2.1 in response to changes in the domestic and international environment of web accessibility is urgent. The revision primarily involves development and selection of web accessibility evaluation items. In this study, the efficient procedures and useful methodologies for developing and selecting the evaluation items are to be presented. FGI (Focus Group Interview) has been devised to reflect every stakeholders opinion fairly. GT (Group Technology) has been applied to expedite the revision processes particularly in the FGI. QFD (Quality Function Deployment) method plays an important role in investigating the relationship between evaluation items and its characteristics, and in analyzing the importance and priorities of each item. This study proposes 5 principles, 17 guidelines and 39 evaluation items which can be used for the revision of KWCAG 2.1. This study is expected to be of great help in establishing the KWCAG 2.2 in the near future.

• IE interfaces
• /
• v.15 no.2
• /
• pp.114-125
• /
• 2002

The objective of this paper is to describe a systematic accident scenario analysis method(SASA) adept at creating accident scenarios for the design of safer products. This approach was inspired by the Quality Function Deployment(QFD) method, which is conventionally used in quality management. In this study, the QFD provides a formal and systematic scheme to devise accident scenarios while maintaining objectivity. SASA consists of three key stages to be broken down into a series of consecutive steps:(1) developing an accident analysis tableau,(2) devising the accident scenarios using the accident analysis tableau,(3) performing a feasibility test, a clustering process and a patterning process, and finally(4) performing quantitative evaluation of each accident scenario. The SASA was applied to a case study of child safety seats. The accident analysis tableau devised 2828(maximum) accident scenarios from all possible relationships between the hazard factors and situation characteristics. Among them, 270 scenarios were devised through the feasibility test and the clustering process. The patterning process reduced them to 29 patterns representative of all accident scenarios. Based on an intensive analysis of the accident patterns, design guidelines for a safer child safety seat were recommended. The implications of the study on the child safety seat case were then discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.666-674
• /
• 2013

This paper studied about the design and implementation of tactical communication network simulator in order to obtain tactical communication network parameter, such as link capacity and routing plan, and a number of exceptional cases that may occur during actual deployment by conducting simulation of a large-scale tactical communication networks. This tactical communication network simulator provides equipment models and link models of commercial OPNET simulator for tactical communication network. In addition, 6 types of simulation scenario writings convenience functions and traffic generation models that may occur in situations of tactical communication network environment were implemented in order to enhance user friendliness. By taking advantages of SITL(System-In-The-Loop) function of OPNET, the tactical communication network simulator allows users to perform interoperability test between M&S models and actual equipment in operating simulation of tactical communication network, which is run on software. In order to confirm the functions and performance of the simulator, small-scale of tactical communication network was configured to make sure interoperability between SITL-based equipment and a large-scale tactical communication network was simulated and checked how to cope with traffic generated for each network node. As the results, we were able to confirm that the simulator is operated properly.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.216-222
• /
• 2021

Advances in technology have given educators a tool to empower them to assist with developing the best possible human resources. Teachers at universities prefer to use more modern technological advances to help them educate their students. This opens up a necessity to research the capabilities of cloud-based learning services so that educational solutions can be found among the available options. Based on that, this essay looks at models and levels of deployment for the e-learning cloud architecture in the education system. A project involving educators explores whether gement Systems (LMS) can function well in a collaborative remote learning environment. The study was performed on how Blackboard was being used by a public institution and included research on cloud computing. This test examined how Blackboard Learn performs as a teaching tool and featured 60 participants. It is evident from the completed research that computers are beneficial to student education, especially in improving how schools administer lessons. Convenient tools for processing educational content are included as well as effective organizational strategies for educational processes and better ways to monitor and manage knowledge. In addition, this project's conclusions help highlight the advantages of rolling out cloud-based e-learning in higher educational institutions, which are responsible for creating the integrated educational product. The study showed that a shift to cloud computing can bring progress to educational material and substantial improvement to student academic outcomes, which is related to the increased use of better learning tools and methods.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.1-8
• /
• 2021

With the rapid growth of intelligent devices and communication technologies, 5G network environment has become more heterogeneous and complex in terms of service management and orchestration. 5G architecture requires supportive technologies to handle the existing challenges for improving the Quality of Service (QoS) and the Quality of Experience (QoE) performances. Among many challenges, traffic steering is one of the key elements which requires critically developing an optimal solution for smart guidance, control, and reliable system. Mobile edge computing (MEC), software-defined networking (SDN), network functions virtualization (NFV), and deep learning (DL) play essential roles to complementary develop a flexible computation and extensible flow rules management in this potential aspect. In this proposed system, an accurate flow recommendation, a centralized control, and a reliable distributed connectivity based on the inspection of packet condition are provided. With the system deployment, the packet is classified separately and recommended to request from the optimal destination with matched preferences and conditions. To evaluate the proposed scheme outperformance, a network simulator software was used to conduct and capture the end-to-end QoS performance metrics. SDN flow rules installation was experimented to illustrate the post control function corresponding to DL-based output. The intelligent steering for network communication traffic is cooperatively configured in SDN controller and NFV-orchestrator to lead a variety of beneficial factors for improving massive real-time Internet of Things (IoT) performance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.17-25
• /
• 2012

Wire bonding process in making semiconductor needs the most precise control and Critical To Quality(CTQ). Thus, it is regarded to be the most essential step in packaging process. In this process, pure gold wire is used to connect the chip and PCB(substrate or lead frame). However, the price of gold has been skyrocketing continuously for a long period of time and is expected to further increase in the near future. This phenomenon situates us in an unfavorable condition amidst the competitive environment. To avoid this situation, many semiconductor material making companies developed new types of wires: Au.Ag wire is one material followed by many others. This study is aimed to optimize the parameter in wire bonding with the use of 6sigma and QFD(Quality Function Deployment). 6sigma process is a good means to not only solve the problem, but to increase productivity. In order to find the key factor, we focused on VOB(Voice of Business) and VOC(Voice of Customer). The main factors from VOB, VOC are called CTQ. However, there were times when these main factors were far from offering us the correct answer, thus making the situation more difficult to handle. This study shows that QFD aids in deciding which of the accurate factors to undertake. Normally QFD is used in designing and developing products. 6sigma process is held more effective when it used with QFD.