• Journal of Astronomy and Space Sciences
• /
• 제28권4호
• /
• pp.299-304
• /
• 2011

As more satellites are designed to downlink their observed image data through the X-band frequency band, it is inevitable that the occupied bandwidth of a target satellite will overlap with that of other X-band downlink satellites. For sun-synchronized low earth orbit satellites, in particular, it can be expected that two or more satellites be placed within the looking angle of a ground station antenna at the same time. Due to the overlapping in the frequency band, signals transmitted from the adjacent satellites act as interferers, leading to degraded link performance between target satellite and ground station. In this paper, link analysis was initiated by modeling the radiation pattern of ground station antenna through a validated Jet Propulsion Laboratory peak envelope model. From the relative antenna gain depending on the offset angle from center axis of maximum antenna directivity, the ratio of received interference signal level to the target signal level was calculated. As a result, it was found that the degradation increased when the offset angle was within the first point of radiation pattern. For a 7.3 m antenna, serious link degradation began at an offset angle of 0.4 degrees. From this analysis, the link performance of the coming satellite passes can be recognized, which is helpful to establish an operating procedure that will prevent the ground station from receiving corrupted image data in the event of a degraded link.

• 대한후두음성언어의학회지
• /
• 제15권2호
• /
• pp.98-111
• /
• 2004

Background and Objectives : The purpose of this study is to analyze the difference of Fundamental Frequency(Hz), Closed Quotient(Qx ; %), Intensity(dB), Vocal tract length and width(cm), formant frequency(Hz), level of formant frequency(dB) depending on the larynx position. Materials and Methods : One professional male singer(career : 28 years) produced sustained vowel /a/,/e/,/i/,/o/,/u/ in two larynx position (higher, lower) with Dr. Speech and video fluoroscopy was used to quantify the vocal tract morphology. Results : In lower larynx position, CQ is increased 9.8% and Intensity is increased about 10% and level of Formant Frequency is increased. And also Vocal tract length is longer 2.4cm, Vocal tract width(Anterior width : 0.4cm, lateral width : 0.2cm) is wider than in higher larynx position. Conclusions : Singer's formant has a prominent spectrum envelope peak near 2400-2600Hz by clustering of F3, F4 and F5 near 3400Hz in lower larynx position.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1262-1270
• /
• 2007

본 논문에서는 feedforward와 post-distortion 기법을 이용하여 평형 증폭기 내에서 발생하는 혼변조 왜곡 성분을 제거할 수 있는 새로운 왜곡 상쇄 메커니즘인 cross post-distortion 선형화 기법을 제안한다. 출력 동적 영역과 대역폭 측면에서 제안하는 선형화 방식은 기존의 feedforward 방식에 뒤지지 않는 성능을 가지고 있으면서 상대적으로 높은 효율을 제공한다. 이론적 뒷받침을 위해 제안하는 시스템과 feedforward 방식의 전력 증폭기와 오차증폭기의 전력 용량을 비교 분석하였고, IMT-2000 대역에서 실제 구현을 통하여 이를 실험적으로 뒷받침하였다. 최대 출력 전력 240 W의 기지국용 상용 대전력 증폭기에 적용했을 때, wideband code division multiple access (WCDMA) 4FA 신호에 대하여 평균 출력 전력 40 dBm에서 약 18.6 dB의 개선 효과를 얻었다. 제작된 전력 증폭기는 WCDMA 신호 기준으로 feedforward 방식에 비해 약 2 % 개선된 효율을 보였다.

• 한국전자파학회논문지
• /
• 제21권5호
• /
• pp.510-518
• /
• 2010

본 논문에서는 UHF 대역(380~910 MHz)의 간이 무선 및 TRS(Trunked Radio System) 단말기에서 이용 가능한 CFL(Cartesian Feedback Loop) 선형화 칩을 Si 기반의 $0.6\;{\mu}m$ BiCMOS 공정을 이용하여 설계 및 제작한 결과를 보였다. 단말기의 송신 전력을 가변하기 위한 이득 제어 회로를 궤환 경로뿐만 아나라 순방향 경로에도 삽입함으로써 CFL의 안정성을 일정하게 유지하도록 하였으며, 무전기 PTT(Push-To-Talk) 동작에 적합하고 구현이 용이한 S/H(Sample & Hold) 구조를 이용한 DC-offset 제거 기능을 구현하였다. 송신 시험 결과, CQPSK(Compatible QPSK) 신호 인가 시, PEP(Peak Envelope Power) 3 W(34.8 dBm) 출력에서 FCC의 방사 마스크 규격을 만족함을 확인하였으며, Two-tone 인가 시, 30 dB 이상의 3차 IMD 성분 개선을 확인하였다.

• 한국환경보건학회지
• /
• 제44권4호
• /
• pp.360-369
• /
• 2018

Objectives: Outdoor tobacco smoke can penetrate into the indoor environment through cracks in the building envelope. This study aimed to characterize the particle size distribution of infiltrated secondhand smoke (SHS) through the gap in a single glazed and a secondary glazed window according to pressure differences in a chamber. Methods: Two polyvinyl chloride sliding windows were evaluated for infiltration, one with a glazed window and the other with a secondary glazed window. Each window was mounted and sealed in a polycarbonate chamber. The air in the chamber was discharged to the outside to establish pressure differences in the chamber (${\Delta}P$). Outdoor smoking sources were simulated at a one-meter distance from the window side of the chamber. The particle size distribution of the infiltrated SHS was measured in the chamber using a portable aerosol spectrometer. The particle size distribution of SHS inside the chamber was normalized by the outdoor peak for fine particles. Results: The particle size distribution of SHS inside the chamber was similar regardless of window type and ${\Delta}P$. It peaked at $0.2-0.3{\mu}m$. Increases in particulate matter (PM) concentrations from SHS infiltration were higher with the glazed window than with the secondary glazed window. PM concentrations of less than $1{\mu}m$ increased as ${\Delta}P$ was increased inside the chamber. Conclusions: The majority of infiltrated SHS particles through window gap was $0.2-0.3{\mu}m$ in size. Outdoor SHS particles infiltrated more with a glazed window than with a secondary glazed window. Particle sizes of less than $1{\mu}m$ were associated with ${\Delta}P$. These findings can be a reference for further research on the measurement of infiltrated SHS in buildings.

• Wind and Structures
• /
• 제27권3호
• /
• pp.163-173
• /
• 2018

The design wind pressure for low-rise buildings in the ASCE 7-10 is defined by procedures that are categorized into the Main Wind Force-Resisting System (MWFRS) and the Components and Cladding (C&C). Some of these procedures were originally developed based on steel portal frames of industrial buildings, while the residential structures are a completely different structural system, most of which are designed as low-rise light-frame wood constructions. The purpose of this study is to discuss the rationality (or irrationality) of the extension of the wind loads calculated by the ASCE 7-10 to the light-frame wood residential buildings that represent the most vulnerable structures under extreme wind conditions. To serve this purpose, the same approach as used in the development of Chapter 28 of the ASCE 7-10 that envelops peak responses is adopted in the present study. Database-assisted design (DAD) methodology is used by applying the dynamic wind loads from Louisiana State University (LSU) database on a typical residential building model to assess the applicability of the standard by comparing the induced responses. Rather than the postulated critical member demands on the industrial building such as the bending moments at the knee, the maximum values at the critical points for wood frame buildings under wind loads are used as indicators for the comparison. Then, the critical members are identified through these indicators in terms of the displacement or the uplift force at connections and roof envelope. As a result, some situations for each of the ASCE 7 procedures yielding unconservative wind loads on the typical low-rise residential building are identified.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.873-879
• /
• 2007

본 논문에서는 Freescale사의 Si-LDMOSFET 4-W 소자를 이용하여 고효율 class-F 전력 증폭기를 구현하였다. Class-F 전력 증폭기를 구현하는데 있어서 모든 하모닉 성분들에 대해 원하는 임피던스를 갖도록 조정하기는 불가능하기 때문에 2차와3차 하모닉 성분만을 조율하여 회로의 간결함과 동시에 상대적으로 높은 효율을 얻을 수 있었다. 또한, 본 논문에 설계된 증폭기는 보다 정확하게 하모닉 성분을 조율하기 위해, LDMOSFET의 대신 호 등가 모델에서 가장 큰 영향을 미치는 drain-source capacitance(Cds)와 bonding inductance(Lb)를 추출하여 하모닉 조율 회로를 설계하였다 제작된 고효율 class-F 전력 증폭기의 측정 결과 drain-efficiency(DE) 65.1%, power-added-efficiency(PAE) 60.3%의 효율을 얻을 수 있었다.

• 한국통신학회논문지
• /
• 제28권10A호
• /
• pp.807-815
• /
• 2003

MultiCode-CDMA(MC-CDMA) 시스템은 채널수가 증가할수록 신호의 PAPR(Peak to Average Power Ratio)이 증가하게 되어 증폭기의 비선형 특성에 의해 시스템 성능이 열화된다. MultiPhase Clipped MultiCode CDMA(MP-CDMA)[1] 시스템은 이러한 증폭기의 비선형 특성에 의한 시스템 성능 열화를 상쇄한다. 본 논문에서는 변조방식을 MPSK가 아닌 차동 부호화된 MPSK 방식을 사용했고 이렇게 변형된 시스템을 DMP-CDMA 시스템이라고 부를것이다. 차동 검출 방식을 적용한 DMP-CDMA 시스템은 위상 보정을 위한 모듈이 필요없고, 파일럿(pilot) 신호를 위한 추가적인 데이터 전송이 필요 없다는 장점을 가진다. 그러나 동기 검출을 사용한 시스템에 비해서 약 4.0dB의 성능열화를 보인다. 차동 검출 방식을 사용한 DMP-CDMA 시스템의 성능 열화를 보상하기 위해서 다중 심볼 차동 검출 방식을 적용한 결과 차동 검출 방식에 비해서 약 3.6dH의 성능 개선 효과를 보았다.

• 한국포장학회지
• /
• 제29권3호
• /
• pp.175-179
• /
• 2023

This paper analyzes the vibration characteristics within the cargo compartment of a three-wheeled cargo bike when used on both regular roads and dedicated bicycle lanes. When cargo is loaded into the cargo compartment of a cargo bike and driven on the road, the shocks and vibrations transmitted from the ground can potentially affect the transported goods and even lead to product damage. As the vibration characteristics applied to the cargo compartment may vary depending on the condition of the road, vibration sensors were attached to the cargo bike's cargo compartment for data collection during operation on different road types. According to KS T ISO 13355 standards, the cargo bike can withstand vibrations within the range of 10 Hz to 60 Hz when operating on both bicycle lanes and regular roads. However, it is observed that there are peaks exceeding the profile in the frequency range of 3-6 Hz. In the 70-200 Hz range, the profile is exceeded on both regular roads and bicycle lanes, with a tendency for higher exceedance on bicycle lanes. The Grms value within the frequency range of KS T ISO 13355 is 5.926 m/s² (0.604 Grms). When operating on bicycle lanes with cargo, the Peak envelope optimization PSD value is 6.553 Grms, while on bicycle lanes, it is 7.708 Grms, indicating a difference of at least tenfold.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권5호
• /
• pp.682-692
• /
• 2007

This study presents an automatic system to predict parturition time in the crated sows. The system relies on ultrasonic transducers mounted from above along the length of the crate. Using a 40 kHz time of flight (TOF) single envelope wave, the momentary distances between the sensors are measured. Therefore, the local momentary height of the sow and the momentary posture, i.e. standing posture (SDP), kneeling posture (KP), sitting posture (STP) and lateral lying posture (LLP) are determined. Crated sows change their postures from standing to lying and vice versa which follows a characteristic pattern. As parturition approaches, sows exhibit uneasiness, restlessness and the stand up sequence (SUS, the posture transition from LLP to SDP) rate increases because of labor pains. In time series, the SUS rate demonstrates a peak and it happens approximately 0-12 h before parturition. In this paper, the basic parturition threshold value method (BPTVM) and the same hour method (SHM) are proposed for predicting parturition, both of which are based on the SUS rate. The BPTVM mainly detects the peak of the SUS rate. As the SUS rate exceeds the threshold value, the parturition becomes predictable. Moreover, the SHM calculates the difference in the SUS rates between a particular time of day and the corresponding time of the preceding day. Compared to the BPTVM, the SHM can eliminate the circadian rhythm of the SUS rate influenced by feeding behavior. Using the SHM the parturition can be approximately predicted within hours. In an attempt to define the threshold parameters of predicting parturition, a data set with 32 sows of the SUS rate are used to estimate assumable predicting probability. The results show the assumable probability of the parturition prediction within 9 h is 96.9% for the SHM and 84.4% for the BPTVM. Moreover, the SHM can even reach a 75% probability of prediction within three hours of parturition. We conclude that the SHM is more accurate and is more useful for parturition time prediction. When parturition is detected, the proposed algorithm generates a warning signal which can inform human personnel to protect the mother and newborn piglets.