• 한국인터넷방송통신학회논문지
• /
• 제11권5호
• /
• pp.47-52
• /
• 2011

본 논문에서는 주행 중 타이어와 노면이 마찰하면서 발생하는 초음파 신호에서 이물질로 인해 야기되는 우성주기를 검출하여 타이어 손상 유무를 판별하는 알고리즘에 대해 연구하였다. 손상된 타이어에서 획득한 초음파 신호의 포락선에 대해 전력스펙트럼을 산출하고 통계적 처리에 의한 임계값을 설정함으로써 우성주기를 판별하는 알고리즘을 제안하였다. 모의실험 결과, 시속 80km/h로 주행 시 초음파 신호의 포락선에 대해 전력스펙트럼의 피크주기 97.6ms에 비해 제안된 알고리즘의 우성주기는 100ms로서 포락선 피크의 평균주기 101.24ms를 기준으로 하였을 때 더 정확한 주기 측정 결과를 보였다.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.231-238
• /
• 2020

This paper investigates the soundness of porcelain insulators associated with the acoustic emission (AE) technique. The AE technique is a popular non-destructive method that measures and analyzes the burst energy that occurs mainly when a crack occurs in a high-frequency region. Typical AE methods require continuous monitoring with frequent sensor calibration. However, in this study, the AE technique excites a porcelain insulator using only an impact hammer, and it applies a high-pass filter to the signal frequency range measured only in the AE sensor by comparing the AE and the acceleration sensors. Next, the extracted time-domain signal is analyzed for the damage assessment. In normal signals, the duration is about 2ms, the area of the envelope is about 1,000, and the number of counts is about 20. In the damage signal, the duration exceeds 5ms, the area of the envelope is about 2,000, and the number of counts exceeds 40. In addition, various characteristics in the time and frequency domain for normal and damage cases are analyzed using the short-time Fourier transform (STFT). Based on the results of the STFT analysis, the maximum energy of a normal specimen is less than 0.02, while in the case of the damage specimen, it exceeds 0.02. The extracted high-frequency components can present dynamic behavior of crack regions and eigenmodes of the isolated insulator parts, but the presence, size, and distribution of cracks can be predicted indirectly. In this regard, the characteristics of the surface crack region were derived in this study.

• Architectural research
• /
• 제18권4호
• /
• pp.171-178
• /
• 2016

Architectural utility in Richard Neutra's early twentieth century modern school design was paramount in progressively shaping salience of academic institutions, in part to move beyond neoclassical traditions in style based design. The intention being to address school and community through modern architectural solutions. Expanding on Neutra's practice, the planning and design of new public schools in Los Angeles, are advocating the integration of institutional and public spaces. This research will document through qualitative analysis of institutional design within transitioning neighborhoods, a utilitarian approach that has become foundational for positive urban change. The focus of this research will reflect upon contemporary schools designed by DalyGenik Architecture, Coop Himmelblau and Michael Maltzen Architecture. Comparing with Neutra's early modernist approach, the selected case studies will address material and spatial applications having redefined functional relationships of interior space, architectural envelope and an interconnected public realm. A dynamic peripheral condition in new school design has emerged with the elimination of decorative adornment, clarifying utilitarian intentions of institutional service to and the rejuvenation of public realms and community spaces.

• 한국가축번식학회지
• /
• 제11권3호
• /
• pp.206-217
• /
• 1987

Testes from the drake and the gander have been examined by the electron microscopy in thin sections in order to examine the spermiogenesis and the structure of spermatozoa. The spermiogenesis can be divided into three stages: early spermatid, nuclear elongation, and matured spermatid. In the early spermatid of the drake, there are thread-like material in the nucleus, a prominent nuclear envelope around the nucleus, and big lumens in the cytoplasm. The shape of the gander's mitochondria in the early spermatid is slender compared to that of the drake, and the inner membrane of the mitochondria is thicker than the outer membrane. The distal centriole of the drake and the gander in the early spermatid is a long hollow cylinder form. In the nuclear elongation stage, elongated nucleus forms two or three cross sections in one spermatid cell and it is surrounded by the amorphous sheath. The nucleus of the matured spermatid is compact and its apical end is covered with acrosome cap and acrosome spine. The axoneme is surrounded by the amorphous material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.183-186
• /
• 1995

The fabrication of dielectric multilayer mirror(DMM) optimized at the wavelength of 1.55$\mu\textrm{m}$ and its spectral properties were investigated. The materials used in the fabrication of DMM are TiO$_2$-SiO$_2$, which have the advantage of yielding high reflectance for relatively small numbers of layers. The optical constants of TiO$_2$single film were obtained by using a modified envelope method. The reflectances of DMMs with 3,7,11 and 23 layers were 58%, 89%, 97% and 99.9% at the wavelength of 1.55$\mu\textrm{m}$, respectively.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.781-786
• /
• 2005

The binding energy in the n-type $GaAs/Al_xGa_{1-x}As$ quantum well is calculated. The shooting method, modified from the finite difference method, is used for the calculation of the subband energy level and its wave function. In order to account tot the change of the potential energy due to the charged particles, impurities and electrons, the self consistent method is employed. The wave function used for the calculation of the binding energy is assumed to be composed of the envelope function and hydrogenic 1s function. Then, the binding energies calculated by taking into account lot two different types of the hydrogenic 1s function are compared.

• 한국BIM학회 논문집
• /
• 제2권2호
• /
• pp.17-26
• /
• 2012

This paper presents the results of a theoretical energy analysis of a research test bed called the Zero Net Energy Test House (ZNETH) in Omaha, Nebraska in U.S.A. The ZNETH project is being designed and built with the goal of consuming a negligible amount of energy by offsetting remaining usage after energy conservation. The theoretically consumed and generated energy levels were analyzed using energy modeling software programs. By integrating a highly graphical and intuitive analysis with a Building Information Model(BIM) of the house, this investigation introduces strategies to include sustainable materials and systems to predict energy generation with a case study of ZNETH. In addition, this paper introduces parametric analyses for better envelope design and construction material selection by analyzing simulated energy consumption with various parametric inputs, e.g., material types, location, and size. It was found that the current design of ZNETH does not meet its goal of zero net energy. Sugeestions are presented to assist ZHETH in meeting its net zero energy goal.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.21-27
• /
• 2000

We used the surface photovoltage spectroscopy(SPVS) for characterization of GaAs/Al\ulcornerGa\ulcornerAs multi-quantum well(MQW) structures grown by molecular beam epitaxy(MBE) method. Energy gap related transitions in GaAs and AlGaAs were observed. The Al composition(x=0.3) was determined by Sek's composition formula. Transition energies in MQW were determined using the differential surface photo-volatage spectroscopy)DSPVS) of the measured resonanced. In order to indentify the transitions, the experimentally observed energies were compared with results of the envelope function approximation for a rectangular quantum well. We have observed and interesting behavior of the temperature dependence(80K~300K) of the 11Hand 11L transition for sample.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.119-125
• /
• 1997

In this study, piezoelectric transducers were designed and manufactured using PZT-5A which had relatively high electromechanical coefficient, nondestructive testing system was developed which was able to inspect automatically using stepping motors, PC-Lab, and PC-Scope. The optimum design conditions for NDT were presented and verified comparing PZT-5A probes with comercial probes. It was proved by simulation and experiments that Epoxy is a good material as matching and backing layers. The envelope was reduced 60% with matching layer and 76% with matching and backing layer. NDT was successfully carried out for aluminum test pieces. Distance error of PZT-5A probe was 2.8%.

• 항공우주시스템공학회지
• /
• 제9권3호
• /
• pp.1-7
• /
• 2015

In this study, the design of compound smart materials hydraulic pump that can be applied to a small-medium size UAV having a limited space envelope and weight has been conducted. Compound Smart Material Pump(CSMP) proposed in this paper is composed of a pressurize pump and a flow pump for supplying the high pressure and fluid displacement to overcome the disadvantages of the piezoelectric actuator which has a small strain. Though this compound smart material pump has been designed as small size and lightweight as possible, it can sequentially supply the sufficient large flow rate and pressure required for the brake operation. For the design of CSMP, about 2,700 kg (6,000 lb) class fixed wing manned aircraft was selected. Based on the established requirements, the design of the CSMP have been done by strength, vibration, and fluid flow analysis.