• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.79-82
• /
• 2017

In this paper, we proposed the wireless communication system using millimeter-wave envelope detector. The sub-harmonic mixer based on schottky barrier diode was used in the transmitter. The receiver was used millimeter-wave envelope detector. The transmitter was composed of schottky diode sub-harmonic mixer, frequency tripler, and horn antenna. The receiver was composed of horn antenna, millimeter-wave envelope detector, low pass filter, base band amplifier, and limiting amplifier. At 1.485 Gbps and 300 GHz, the eye-diagram showed a very good performance as measured by the error free. Communication distance is reduced compared to the heterodyne receiver, but compact and lightweight is possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.949-955
• /
• 1997

Detection of the existence of a desired user is considered in this paper. We assume that the signal to noise ratio is high enough for us to ignore the effects of noise compared with those of the interference by other users. The inter-user interference and user signals are modeled by the Nakagami model. An observation model for this situation is proposed, the locally optimum test statistic is derived under the model, and the asymptotic performance of the locally optimum detector is compared with of the envelope detector. We show that the locally optimum detector performs better than the conventional envelope detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2470-2476
• /
• 1997

We propose a simle scheme for detecting tone signals narrowly spaced in the frequency by employing a nonlinear device called Teager's energy tracker. When the input signal is a tone signal, the output of Teager's energy tracker is proportional to the energy and tone frequency of the input signal. When the envelope of the input tone is varying, this tracker can also track the energy of the envelope. By employing Teager's algorithm as a preprocessor, the detector for narrowly spaced tone signals can be implemented without the use of sharp notch filters. As an example, the proposed detector is applied to distinguishing ITU-T V.8 and V.25 tone signals. The detector perfodrmance is analyszed and is verified by computer simulation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.111-116
• /
• 1998

In this paper, we proposed method of performance enhancement of the ultrasonic imaging system using quadrature detector and implementation of the software quandrature detector. Since the quadrature detector is more sensitive than the enbelope detector of the conventional ultrasonic imaging syustem, we are able to achieve the contrast enhnacement. Although hardware quadrature detector is able to process high sped data acquisition, its hardware has complexity. In order to show the performance of the software quadrature we have constructed ultrasonic signal processing system and obtained the reflected signal from the aluminum specimen using A/D convertor. Our experimental results showed that image of the quadrature detector is better than that of the envelope detector.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.377-380
• /
• 2000

In this paper, a new adaptive linearizer architecture with the predistorter is proposed. In the M.Ghaderi's paper, two analog predistorters and an envelope detector are used. Analog circuits for the analog predistorter and the envelope detector can cause imperfection and inaccuracy of the system and make circuits more complex. To solve those problems, most of processes including the predistortion are made by the DSP. The RLS algorithm is applied so that the errors between power amplifier output signals through the postdistorters and predistorted input signals can be converged to the global minimum.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.106-109
• /
• 1998

Wireless communication systems, in particular, must operate in a crowded electro-magnetic environmnet where in-band undesired signals are treated as noise by the receiver. These interfering signals are often random but not Gaussian Due to nongaussian noise, the distribution of the observables cannot be specified by a finite set of parameters; instead r-dimensioal sample space (pure noise samples) is equiprobably partitioned into a finite number of disjointed regions using quantiles and a vector quantizer based on training samples. If we assume that the detected symbols are correct, then we can observe the pure noise samples during the training and transmitting mode. The algorithm proposed is based on a piecewise approximation to a regression function based on quantities and conditional partition moments which are estimated by a RMSA (Robbins-Monro Stochastic Approximation) algorithm. In this paper, we develop a diversity combiner with modified detector, called Non-Linear Detector, and the receiver has a differential phase detector in each diversity branch and at the combiner each detector output is proportional to the second power of the envelope of branches. Monte-Carlo simulations were used as means of generating the system performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.2
• /
• pp.86-91
• /
• 2014

This paper compare with SNR performance of coherent integration and non-coherent integration in radar system. This paper to prevent distortion of transmit signal and radar return in radar system is used to pulsed waveform. This paper to estimate target detection range and to compare with SNR performance used to coherent integration performed before the envelope detector and non-coherent integration processed after the envelope detector. Through simulation, SNR performance of coherent integration and non-coherent integration were comparatively analyzed. SNR performance of coherent integration is good proof higher than non-coherent integration.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.59-64
• /
• 2006

The broadband power detector for power amplitude envelope detection of the direct-conversion Six-port output signal was designed and implemented in this paper. The power detector should be linearly operated to produce the linear amplitude and phase signal for input RF signals in required broadband frequency range. The power detector should be designed under conditions of matching circuit with low VSWR, which protect unbalanced phase signal from reflection signal due to mismatch between the output port of a six-port and the input port of a power detector. The designed power detectors, which were implemented in L-band with 50 ohm matching and Ku-band with multiple LC matching circuits and isolator, respectively, were analyzed in viewpoints of the utilization as a power detector of direct conversion Six-port. The dynamic range of designed power detectors were also measured and rvaluated as a power detector of Six-port circuit.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.87-92
• /
• 2005

In this paper, adaptive bias circuit and PBG structure have been employed to suppress IMD and improve PAE (Power Added Efficiency) of the power amplifier. It is controlling the gate 'dc' bias voltage with the envelope of the input RF signal. and The PBG structure has been employed on the output port of power amplifier . The proposed power amplifier using adaptive bias circuit and PBG has been improved the IMG by 3 dBc, and the average PAE by $35.54\%$, respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.26-29
• /
• 1975

In this paper, the input equivalent resistances of the n phase-diode average and envelope detection. circuits for the sinusoidal signal waveforms are analytically derived from the power loss in their load resistances, and the input equivalent resistance of the n phase-diode envelope detection circuits for the arbitrary signal waveforms is also obtained from the same physical conception.