• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.413-422
• /
• 2022

본 논문에서는 중대형 위성용 '제어모멘트자이로'의 고속회전체인 모멘텀 휠의 고장 분석에 대해 기술하였다. 고장 분석을 위해 변조된 신호에서 주기적으로 발생되는 충격신호를 찾기 위해 힐베르트 변환 기법과 신호 복조 기법을 사용한 포락선 스펙트럼 분석을 하였다. 이를 통해 높은 신호의 크기를 가지는 특정 주파수 밴드에서 회전주파수의 조화 성분과 베어링 결함 주파수가 있는지 분석하여 모멘텀 휠의 고장을 진단하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.256-261
• /
• 1986

The sensitiveness of the stability characteristics of the aircraft with respect to changes in the stability parameters as predicted by the linear analysis is applied for the two aerodynamic models proposed. The results give the detailed information for an aircraft dynamic behavior especially at complicated flight envelope.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1475-1485
• /
• 2016

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.307-311
• /
• 1993

Research concerning gears included in rotating machines has been reported using the acoustic emission (AE) method, however, almost no research has been conducted using the AE method in regard to running gears in a bending fatigue processor spur gear teeth. Therefore, in this report, a power circulating-type gear testing machine was used and AE signals and crack length were measured in the bending fatigue process of case-hardened spur gear. Furthermore, the envelope of the AE signal was detected and various analysis were carried out in this data. In the course of the experiments, the following results were observed : the AE signal envelope consists mainly of contact frequency component and twice as many as this;two peaks of AE appear in each tooth contact by the tip corner contact ; as a result of the severe tip corner contact ; as a result of the severe tip corner contact with the sudden increase of crack length, AE signal becomes large.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1771-1772
• /
• 2006

In this paper, we considered multiple faults detection on a coaxial cable through Time-Frequency Domain Reflectometry (TFDR). It is well known that TFDR has high resolution accuracy for detecting and estimating the fault detection on a coaxial cable. This approach was based on time-frequency signal analysis and utilized a chirp signal multiplied by a Gaussian time envelope. The Gaussian envelope provided time localization, while the chirp allowed one to excite the system interest. We carried out experiments with 10C-FBT coaxial cable having either one or two faults. The result shows TFDR can be extended to detect multiple faults with high accuracy on a coaxial cable.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.75-83
• /
• 2004

The IB is normally defined in terms of BA, OA, security system, information processing and telecommunications services However, the buildings being already in existence are deficient in two areas. One of these areas is building envelope and plan. The other area is mechanical, electrical and structural systems which do not provide the environmental quality required by IB. Existing technology and design knowledge are available to address these deficiencies. Especially, the office buildings being already in existence must meet IB requirement in order to achieve desirable office environment. They are a building envelope, moisture control, properly-located windows, shafts for duct, telephone and electric closets and acoustical environments. In this paper, a new approach to construct the work scope of remodelling the office building being already existence is described by contrasting the building performance criteria of IB. It concludes by speculating on the consequences of extrapolating the results of study to remodelling the office building being already existence.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.208-212
• /
• 2018

In this paper, we focus on planing avoidance control for a supercavitating underwater vehicle based on the potential function method. The planing margin can be calculated using the relative position between the cavity center and vehicle center at the end of the vehicle. The planing margin was transformed into a limit variable such as the pitch angle and yaw angle limit. To prevent the vehicle attitude from exceeding the limit variable, a potential function based planing envelope protection method was proposed. The planing envelope protection system overrides commands from the tracking controller, and the vehicle attitude converges to a desired angle, in which the potential function is minimized. Numerical simulations were performed to analyze the physical feasibility and performance of the proposed method. The results showed that the proposed methods eliminated the planing, allowing the vehicle to follow tracking commands.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.434-440
• /
• 2013

최근 건축은 정형의 건축물의 외관과 설계 범위를 벗어난 비정형의 설계, 시각화, 3차원 모델 구현이 이루어지고 있다. 일반 정형건축물과는 달리 비정형건축물의 지붕과 외벽은 디자인 중심의 외벽시스템과 배수, 방수의 성능을 지닌 지붕마감시스템으로 설계되고 시공되었다. 그러나 비정형 건축물은 외벽과 지붕의 구분이 없어지고 외피로의 개념으로 통합된다. 또한 건축설계의 디자인 트렌드가 정형에서 비정형의 자유로운 형태로 급변하고 있어 각종 현상설계 및 턴키 등 설계경기의 당선을 위하여 비정형의 건축물이 자주 등장하고 있다. 기존 비정형 건축구조물의 곡면외피를 시공하기 위해서는 스틸 각파이프나 C형강으로 비정형 형태를 만들고 거기에 외장을 시공한다. 그러나 이는 공사 기간 지연과 높은 공사비용이 소요되는 문제점이 있다. 제작, 설치, 검측 후 비정형 패널의 부착 오류, 줄눈의 불일치, 곡면의 직선 시공 등의 오류가 매우 빈번히 발생하고 있다. 이에 본 연구는 3차원 좌표제어 기술의 하나인 CNC Twisted Tube 공법을 적용한 구조체의 시공과정을 면밀히 검토하여 3차원 좌표제어 기술로 비정형 건축물의 구현 방안을 제시한다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권3호
• /
• pp.46-56
• /
• 2001

The present study concerns the numerical simulation of a supply airflow control in a variable air volume (VAY) system. A stratified thermal model (multi-zone model) is suggested to predict a local thermal response of an air-conditioned space. The effects of various thermal parameters such as the cooling system capacity, the thermal mass of an air-conditioned space, the time delay of thermal effect, and the building envelope heat transmission are investigated. Further, the influence of control parameters such as the supply air temperature, the PI control factor and the thermostat location on a VAV system is quantitatively delineated. The results obtained show that the previous homogeneous lumped thermal model (single zone model) may overestimate the time taken to the set point temperature. It is also found that there exist the appropriate ranges of the control parameters for the optimal airflow control of the VAV system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.148.5-148
• /
• 2001

In this report, an adaptive flight control law based on a linear-parameter-varying (LPV) model is presented for a flight control system. The control system is designed to track an output of a vehicle to a reference signal from the guidance system, which generates a reference flight path. The proposed adaptive control law adjusts the controller gains continuously on line as flight conditions change. The obtained adaptive controller guarantees global stability over a wide flight envelope. Computer simulation involving six-degree-of-freedom nonlinear flight dynamics is applied to Japan´s automatic landing flight experimental vehicle (ALFLEX) to examine the effectiveness of the proposed adaptive flight control law.