• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1719-1726
• /
• 2002

Design variables and design parameters are rarely deterministic in practice. Robust optimal design takes into consideration of the uncertainties in the design variables and parameters. Robust optimization methodology with probability constraints requires a lot of system analyses fer calculating failure probability of each constraint. By introducing an envelope function to reduce the number of constraints, efficiency of robust optimization techniques can be considerably improved. Through four illustrative examples, it is shown that the number of system analyses is greatly decreased while little differences in the optimum results are observed.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.183-186
• /
• 1991

In order to prepare the functional organic optic meterials, the capacitive coupled gas flow type plasma polymerization apparatus was designed and manufactured. Styrene and para-Xylene monomer were adopt as organic materisl. Optical constant, refrative index, extinction coefficient of organic thin films by the gas flow type plasma polymerization appratus were determined by envelope method using spectrophotometry. The refractive index of plasma polymerized thin films was decreased in accordance to increase of wave length and discharge time. The extinction coefficient was very small compared with refractive index. From the experimental result of optical constant and film thickness, it was considered that the films which had required optical properties and thickness can be prepared by control of polymerization condition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.160-164
• /
• 2004

In DS/CDMA(direct sequence code division multiple access) system using the approximated analytic chip waveforms are applied. Proposed chip waveforms are classified into 2 types: uniform chip waveforms with uniform envelope and non-uniform chip waveforms with non-uniform envelope. It has confirmed that the similarity of the approximated analytical chip waveforms is compared using chip waveforms, envelope, phase, correlation, and bandwidth properties.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.1-6
• /
• 2010

Ball bearings are one of main components that support the rotational shaft in high speed rotary machinery. So, it is very important to detect the incipient faults and fault growth of bearing since the damage and failure of bearing can cause a critical failures or accidents of machinery system. In the past, many researchers mainly performed to detect the bearing fault using traditional method such as wavelet, statistics, envelope etc in vibration signals. But study on the detection technique for bearing fault growth has a little been performed. In this paper, we verified the possibility for monitoring of fault growth and detection of fault size in bearing outer-race by using the envelope powerspectrum and probabilistic density function from measured vibration signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.795-802
• /
• 2005

Binary CDMA(B-CDMA) is a new modulation scheme that employs a constant envelope modulation scheme By quantizing the envelope of multi-codes CDMA signal into a small number of levels, the B-CDMA can reduce the peak-to-average power ratio, while preserving the advantages of CDMA signaling such as the soft capacity and robustness to interference. In this paper, we analyze the performance of B-CDMA systems in multi-path channel assuming that the spreading factor is not too small. Finally, the analytic results are verified by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.683-689
• /
• 2004

The power and bandwidth efficient constant-envelope BPSK (CE-BPSK) modulation is proposed. The CE-BPSK signal is realized specifying the phase transition characteristics for the conventional low pass filtered BPSK signal. Since the CE-BPSK signal has constant envelope and modified waveform, the CE-BPSK signal has better power and bandwidth efficiency compared to the conventional BPSK signal while the CE-BPSK signal is backward compatible to the conventional BPSK signal. It is also shown that the bit error rate performance of the CE-BPSK signal is the same as that of the conventional BPSK signal.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.251-256
• /
• 2008

Nowaday, The Sustainable Development about global environment is the most important subject. In urban environment, a variety of the nature energy utilization such as the solar energy are the most efficient solution to solve this issue. One of these efficient solutions, a photovoltaic system using sunlight has been introduced to the building with an advantage such as cost-effective, safe for using and good for environment friendly in light with energy utilization. The BIPV is one of the most interesting and promisingly possibilities of an active use of solar energy at the building. Therefore the goal of this study is to get securing the application information of BIPV as finished envelope. The purpose of this study is to investigate the current performance measurement methods of BIPV module and to measure the performance of BIPV module by mock-up tests.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.313-321
• /
• 2014

A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.241-242
• /
• 2009

Characterics of carrier-envelope-offset frequency ($f_{ceo}$) of a femtosecond laser stabilized by the direct locking method were investigated using two f-to-2f interferometers. The stability of $f_{ceo}$ was comaparable to that achieved with a conventional PLL method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1988.06c
• /
• pp.71-123
• /
• 1988

The aim of this paper is to examine the end bearing capacity of a pile in cohesionless soils. The ode of failure of soil due to pile installation is assumed from experimental observation of actual soil deformation. A new solution is proposed complying with the assumed mode of failure by employing the theory of cavity expansion. The effect of curvature of failure envelope is studied in relation to tile proposed solution. The influence of a curved failure envelope becomes larger with increasing degree of curvature and the level of confining stress. This effect in some cases or reduce the end bearing capacity by tore the 80 percent compared with that given by a straight failure envelope. For practical application of tile proposed solution, the method of determining the average volume change in the plastic zone is re-evaluated. The proposed solution is confirmed by comparing the theoretical values with experimental results obtained from model pile tests in a calibration chamber. The comparison shows that the proposed solution provides a reasonable prediction of end bearing capacity for both weak and strong grained soils.