• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.347-354
• /
• 2001

In this study, 3-D FEM analysis are carried out to investigate the effect of the corners and re-entrant corners which can't be analysed by 2-D analysis. The excavation shape is re-entrant type conditions. The wall displacement, earth pressure and effectiveness of the corner struts are investigated in the re-entrant case, The 3D analysis are peformed to evaluate the effect of various factors, such as re-entrant corner size, excavation depth, and presence of struts. The wall displacement and earth pressures are influenced the size of re-entrant corner. Therefore, the effect of re-entrant corner should be considered in the evaluation of the earth pressure and displacement of the corners. Finally, strut-support systems are not effective at the re-entrant corner.

• Wind and Structures
• /
• v.22 no.4
• /
• pp.409-428
• /
• 2016

The mechanical and aerodynamic effect of building shape plays a dominate role in the pedestrian level wind environment. These effects have been presented in numerous studies and are available in many wind codes. However, most studies have focused on wind flow around conventional buildings and are limited to few wind directions. The present study investigated wind circulation in the re-entrant corners of cross-shaped high-rise buildings from various wind directions. The investigation focused on the pedestrian level wind environment in the re-entrant corners with different aspect ratios of building arrangements. Ninety cases of case study arrangements were evaluated using wind tunnel experimentation. The results show that for adequate wind circulation in the re-entrant corners, building orientations and separations play a critical role. Furthermore, in normal wind incident directions and at a high aspect ratio, poor wind flow was observed in the re-entrant corners. Moreover, it was noted that an optimized building orientation and aspect ratio significantly improved the wind flow in re-entrant corners and through passages. In addition, it was observed that oblique wind incident direction increased wind circulation in the re-entrant corners and through passages.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.812-824
• /
• 2022

This study proposes to develop a 3D printed re-entrant(RE) strip by shape memory thermoplastic polyurethane that can be deformed and recovered by thermal stimulation. The most suitable 3D printing infill density condition and temperature condition during shape recovery for mechanical behavior were confirmed. As the poisson's ratio indicated, the higher the recovery temperature, the closer the poisson's ratio to zero and the better the auxetic properties. After recovery testing for five minutes, it appeared that the shape recovery ratio was the highest at 70℃. The temperature range when the shape recovery ratio appeared to be more than 90% was a recovery temperature of more than 50℃ and 60℃ when deformed under a constant load of 100 gf and 300 gf, respectively. This indicated that further deformation occurred after maximum recovery when recovered at a temperature of 80℃, which is above the glass transition temperature range. As for REstrip by infill density, a shape recovery properties of 100% was superior than 50%. Additionally, as the re-entrant structure exhibited a shape recovery ratio of more than 90%, and exhibited auxetic properties. It was confirmed that the infill density condition of 100% and the temperature condition of 70℃ are suitable for REstrips for applying the actuator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1052-1059
• /
• 2003

In this paper, we proposed the directional coupler using two layer microstrip substrate which is improved coupling and isolation. Also, we notified a design method. Modified re-entrant mode coupler is the structure added to the aperture on the ground plane in order to improving the coupling value. And, by adding to slits on the floating conductor, this structure has good performance in isolation, VSWR according to S$\sub$11/, and phase difference. As a result, proposed re-entrant mode microstrip directional coupler has about 1.5 dB more higher coupling and 20 dB more higher isolation than conventional coupler. And because this coupler has good performance in phase difference, it can be used multi-section coupler.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.106-122
• /
• 2021

This study confirmed the mechanical properties of an auxetic re-entrant pattern prepared using 3D printing technology and its composite fabric with neoprene for the production of functional auxetic patterns/textiles for safety shoes. Samples were prepared by the tilt angle of a re-entrant pattern of 0°, 30°, 45°, 60° and 90°, and then analyzed using Poisson's ratio, bending, compression, and tensile properties. A 3D printed auxetic re-entrant pattern (3DP-RE) and its composite fabric (3DP-RE/NP) showed a negative Poisson's ratio in all tilting angles that indicated auxetic properties. The results of the bending property shown that strength of 3DP-RE/NP was 1.5 times lower than NP, but the strain improved 2.0 times. It was confirmed that the deformation of 3DP-RE/NP is possible with a low load. Each sample type of compression behavior indicated similar regardless of the tilting angles; in addition, the compression toughness of 3DP-RE/NP increased 1.2 times compared with NP. In the case of tensile properties, 3DP-RE and 3DP-RE/NP were affected by the tilting angle, samples with 90° (the opposite of load direction) showed best tensile property and toughness. 3DP-RE/NP indicated improved bending, compression, and tensile properties.

• Korean Management Science Review
• /
• v.17 no.1
• /
• pp.17-30
• /
• 2000

This paper addresses the effect of protective capacity on the lead time and throughput of a re-entrant line where statistical fluctuations exist in the form of variation in processing times and machine breakdowns. The specific framework employed in the paper is a five station re-entrant line structured as a closed network mode. This paper argues that protective capacity can be used in conjunction with WIP inventory in order to reduce the lead time and to increase the increase the throughput of a line. Simulation analyses are included to give insight into the effectiveness of protective capacity.

• Asia pacific journal of information systems
• /
• v.32 no.3
• /
• pp.564-579
• /
• 2022

The use of on-premises technology in the business environment to create a competitive advantage is ushering in a new era known as digital transformation. As the foundation of digital transformation of enterprises, information technology still has a paradoxical effect on enterprises. This paper documents the effect of investments in IT on a firm's long-term profitability performance measures as return on assets (ROA), as well as tests whether the earlier entrant and the later entrant are different in IT investment performance. Using a sample of China's public firms IT investment data between 2016 and 2019, the result indicates that IT investment in firms have a positive effect on firm performance in full sample, but not in the financial industry firms. When it comes to the different investment time, the result shows no significant difference between the earlier entrant firm and the later entrant firm in the full sample, but not in the case of software industry sample. This should help alleviate the concerns that some have expressed about the viability of digital transformation given the highly publicized IT investment and implementation problems at some firms.

• Asia pacific journal of information systems
• /
• v.20 no.2
• /
• pp.39-62
• /
• 2010

As an engineered product, a software package has multiple dimensions that must be designed judiciously to enhance its competitive viability. Functionality, reliability and price are three such common dimensions. However, many software products are sold as bundles of individual components and the competitive impact of bundling has received less attention in the research literature. In this paper, we examine the implications of software vendors using bundling as an element of competitive strategy. A game theoretic model of the actions of an incumbent and a new entrant is developed and the impact on vendor and consumer welfare is analyzed. Numerical experiments with the model show that (i) increasing bundle size is an effective strategy for the incumbent to increase its payoff at the cost of the entrant's payoff and consumer surplus, especially when the entrant's quality is low (ii) in the presence of bundling, the entrant can still increase its own payoff and consumer surplus at the cost of the incumbent's payoff, by increasing product quality up to the level that best segments market demand with the incumbent and (iii) an increase in bundle size by the incumbent, or an increase in quality by the entrant, can both result in an increase of total surplus. Similar results are observed in a related case where the entrant offers free software bundles. Our results provide insights into how software vendors may strategically use bundling and quality as additional product dimensions in order to stay competitive in the market. These results also inform the competing vendors of the impact of bundling related public policy actions on their respective payoffs.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.57-69
• /
• 2020

Many researchers have recommended that DBR scheduling would be an efficient method to maintain the balance of their workload among many processes in the general flow shop. However, as product variety has increased in recent years, the process has become more complex and requires the re-entrance of raw materials and work in process. The re-entrant line has known for the complex manufacturing process that raw materials are repeatedly processed on the same machine. This study reviews the applicability of DBR against the re-entrant manufacturing line due to the distinguishing characteristics and the higher complexity caused by multiple visits of a job into the identical process. In order to apply the DBR method to the re-entrant process, the main idea is to reconstruct re-entrant process into a virtual flow process(loop) that has a single bottleneck. This study discusses the following two questions. First, DBR is also superior to traditional scheduling methods against re-entrant manufacturing line. And how we structure and detect the system bottleneck (or sub-bottleneck) through drum-buffer-rope concepts. To answer the above questions, we experimented and analyzed the effects of the applicability of DBR under the general re-entrant process model(TRC, Technology Research Center). As a result, we have identified a balance between loops for cycle time and work in process.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.587-596
• /
• 2008

Facility-based competition (FBC) in the telecommunications market is considered to have lower static efficiency in the short term and higher dynamic efficiency in the long term. Under service-based competition (SBC), the entrant can reduce its setup costs by leasing network facilities from the incumbent, which makes the entrant viable, pushes the market price down and promotes static efficiency. This paper attempts to measure static efficiency by comparing the profits of the incumbent and entrant in terms of consumer surplus and social welfare under each competition type by extending the Stackelberg model. The results, assuming a linear demand function and variation in regulatory level, show that FBC results in higher social welfare than SBC on the whole. However, SBC accompanied by strong regulation is also shown to have the potential to be superior over FBC. It is also revealed that FBC exhibits a higher producer surplus (particularly, the incumbent's producer surplus) and is, therefore, more desirable in terms of dynamic efficiency. When the entrant's cost is high in FBC, social welfare is shown to be lowered, implying that cost competitiveness is a necessary condition for social welfare.