• Applied Microscopy
• /
• v.28 no.1
• /
• pp.49-62
• /
• 1998

To investigate the morphological changes of epithelial cells of ductus epididymides by sperm entrance, the Korean striped field mouse, Apodemus agrarius coreae was studied with light and transmission electron microscopy. 1. The diameters of the caput epididymis (Cp) and its lumen were $135\sim145{\mu}(140{\pm}0.5{\mu})$ and $115\sim120{\mu}m(117{\pm}0.1{\mu}m)$. The length and width of the epithelium were $27.0\sim28.5{\mu}m(28.0{\pm}0.1{\mu}m)$ and $4.8\sim5.4{\mu}m(5.1{\pm}0.2{\mu}m)$. 2. The diameters of the corpus epididymis (Cr) and its lumen were $160\sim170{\mu}m(166{\pm}0.2{\mu}m)$ and $140\sim150{\mu}m(145{\pm}0.3{\mu}m)$. The length and width of the epithelium were $17.4\sim18.0{\mu}m(17.6{\pm}0.5{\mu}m)$ and $8.8\sim10.4{\mu}m(9.5{\pm}0.2{\mu}m)$. 3. The diameters of the cauda epididymis (Cu) and its lumen were $270\sim280{\mu}m(275{\pm}0.2{\mu}m)$ and $265\sim275{\mu}m(268{\pm}0.3{\mu}m)$. The length and width of the epithelium were $11.2\sim13.4{\mu}m(12.3{\pm}0.3{\mu}m)$ and $9.2\sim11.2{\mu}m(10.0{\pm}0.2{\mu}m)$. Therefore, the size of diameter and lumen of the ductus epididymides and the width of the epithelium increased from Cp and Cr to Cu, but the length of epithelial cells decreased from Ca and Cr to Cu. These data suggest that the morphological changes of epithelial cells of the ductus epididymides may be the results of the sperm entrance.

• Journal of radiological science and technology
• /
• v.42 no.3
• /
• pp.167-173
• /
• 2019

The Cobey method and the modified Cobey method are most commonly used in clinical practice. Therefore, the purpose of this study was to investigate the radiological differences between Cobey and modified Cobey and provide radiographic information about changes of hindfoot image with X-ray entrance center and tube angle change in modified Cobey. This study was performed on foot and ankle phantom. First, for image comparison of Cobey and modified Cobey, the images obtained by applying the same X-ray entrance center to the ankle joint were compared and analyzed. Second, in the modified Cobey, the X-ray entrance center is set as ankle joint and lateral malleolus. The X-ray tube angle was varied from $10^{\circ}$ to $40^{\circ}$ at $5^{\circ}$ intervals for each X-ray entrance center. The images obtained by varying the X-ray tube angle from $10^{\circ}$ to $40^{\circ}$ at intervals of $5^{\circ}$ for each X-ray entrance center were compared and analyzed. The irradiation conditions were the same with 110 kVp, 200 mA, 10 ms, and 110 cm of source - image receptor distance (SID). Image evaluation was performed by two radiologists. Measurements were made on the lateral point, middle point, and calcaneus width based on a hypothetical line parallel to the calcaneal tuberosity. Data were analyzed by using descriptive statistics as the mean of the distance to each measurement location. The modified Cobey was longer than the Cobey by an average of 3 to 4 mm lateral and medial points, and the calcaneus width was similar (ICC = 0.939). In modified Cobey method, when the X-ray entrance center is ankle joint, the lateral point is about 3 mm and the medial point is about 4.3 mm longer than lateral malleolus. Also, when the X-ray tube angle is more than $20^{\circ}$, the degree of distortion is large. The ICCs for the lateral, medial point, and calcaneus width were 0.998, 0.961, and 0.997, respectively, as the X-ray entrance center and tube angle were changed. There was no significant difference between Modified Cobey and Cobey. Modified Cobey showed no need to compensate the $20^{\circ}$ detector angle of the Cobey. In addition, we suggest that tube angle should be limited within $20^{\circ}$ when modified Cobey is performed.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.11-19
• /
• 2012

The main function of fuel cell manifold is to render reactants distribution as uniform as possible into a fuel cell stack. The purpose of this study is to numerically investigate the effects of stack manifold design on reactants distribution within a fuel cell stack. Four manifold designs with different manifold entrance shapes (expansion or diffuser) and different values of the extra width between the cell outer channel and manifold side wall are considered and applied to the fuel cell stack consisting of 50 cells. Since the fuel cell stack geometry involves several millions of grid points for numerical calculations, a parallel computing methodology is employed to substantially reduce the computational time and overcome the memory requirement. The numerical simulations are carried out and calculated results clearly demonstrate that both the manifold entrance shape and extra width have a substantial influence on manifold performance, controlling the degree of flow separation and entrance length for fully developed flow in the manifold channel. Finally, we suggest the optimum design of fuel cell manifold based on the simulation results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.57-62
• /
• 1997

Based on the facts that significant parts of the harbor response spectrum usually reside in the vicinity of the Helmholtz mode in the eastern part of Korea. economically feasible redemption measures of seiches for malfunctioned harbors already in service is proposed by extending the wisdom of perforated breakwaters and adjusting the width of entrance channel as a control tool. It turns out that as the entrance channel is getting narrower, the harbor system is getting slender due to the increase of added hydrodynamic length so that harbor response can be effectively diminished and separated from the incident wave spectrum where considerable amount of wave energy is located at the lower frequency range.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.643-648
• /
• 2002

In the cutting of plate steel, the quality of the cut surfaces is strongly dependent on the cutting conditions such as cutting speed, kerf width, plate thickness, length of tip-specimen and oxygen pressure etc. the cutting tests of plate steel were carried out using CNC gas cutting machine. this paper deals with cutting characteristics of plate steel using CNC cutting machine. the width of cutting entrance and exit, the surface roughness of cutting surfaces and the cutting surface are examined at various cutting conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.81-91
• /
• 2019

Although the number of users of urban railways is greatly influenced by the land use plan around the railway station, Korea has been studying this problem in a small scale, so that the entrance width is uniformly calculated irrespective of the land use plan, And there is little deviation. Therefore, this study aims to establish a demand estimation model for the entrance and exit of urban railway stations. For this purpose, the demand, land use area, and socioeconomic indicators for each of the 20 urban railway stations were surveyed at 200m and 500m Regression model. The model is based on the assumption that the dependent variable (response variable) of the model is set to 1 day, peak 1 hour, peak time 5 minutes, Education, and park) and socioeconomic indicators (population, employer, employee, and student) as independent variables (explanatory variables). As a result, it was analyzed that the fit of the model is more statistically significant when the use area of the land use by 500 meters of the center radius of the city rail is used as an independent variable and the demand for the daily use of the railway station is used as a dependent variable. The purpose of this study is to estimate the optimal size of urban railway entrance in order to improve the mobility of the user and the transportation weak in urban railway station.

• Journal of Ecology and Environment
• /
• v.31 no.3
• /
• pp.183-191
• /
• 2008

To determine the age structure of a Hynobius leechii breeding population and analyze relationships between the order of entrance to breeding ponds and physical parameters and age, we studied a wild population of the species in the Research Forests of Kangwon National University in Chuncheon, Kangwon, South Korea from March 16 to April 13, 2005. The age of breeding males ranged one to nine years old and that of females ranged from three to nine years old. The asymptotic sizes of males and females were 6.36 and 6.51 cm, respectively, and the growth coefficients of males and females were 0.71 and 0.81, respectively. The snout-vent length (SVL), head length, and body mass of males were all positively correlated with their age, but female age did not show a significant relationship with any physical parameter. The tail depth, body mass, and condition factors (SVL/body mass $\times$ 100) of both males and females were negatively related with the order of entrance to the breeding pond. The head width and SVL of males were also negatively correlated with the order of entrance, but the SVL of females was positively related with the order of entrance. These results suggest that physical parameters are more important determinants of breeding migration patterns than age. We discuss which of two hypotheses, the mate opportunity hypothesis and the susceptibility hypothesis, is better able to explain the order of entrance to breeding ponds for male and female H. leechii.

• Ocean and Polar Research
• /
• v.26 no.3
• /
• pp.465-473
• /
• 2004

Five parameters such as the entrance size of the front wall, conduit size, wave period, wave height and the width of water pool were selected to estimate the inflow rate, which is basic and essential input data to design seawater exchange breakwater with a submerged mound by conducting hydraulic model experiments. In the results of multiple regression analysis, log-log equation showed a good agreement rather than linear equation and the estimation of inflow rate was well done with only two parameters except entrance size of the front wall, wave period and the width of water pool. Finally, non-dimensional flow rate equation is derived.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2015

In recent years, the population composition of rural area is changing due to the decreasing population growth of the aged with disability and people returning to farming. Since 1970's the rural community facilities have been spreaded out across most rural villages. Although the rural community facilities are the most widely used facilities, the existing facilities are need to be new built or remodeled according to demographic changes, usage of facilities, and environmental condition. Given this reality, the rural community facilities such as village assembly hall and nursing home for senior citizen are not only used for daily life place but also used like co-residence having meals and sleeping together. Therefore the rural community facilities have the potential to become welfare service space for rural elderly people. This research focuses on the current situation of universal design applied community facilities. According to the research, most of the village community facilities were built in the 1990s and 82% of the buildings were more than 15 years old. Furthermore, 45% of the village community facilities more than 15 years old most have a ground floor in masonry structure. The area of the building is 65% less than $100m^2$. The width of the access entrance, the height of the sink, gas safety valve and so forth were relatively well designed. However, the handrail of the entrance, space in front of the toilet bowl, the height difference between the entrance and floor, the installation of the width of the ramp and stair handrail was relatively incomplete. Village community facilities to be built in the future should be universal design fundamentally.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.73-79
• /
• 2022

Purpose: The purpose of this study was to investigate the relationship between the minimum effective width (90cm) of the exit of the evacuation stairway installed in accordance with the Building Act and the evacuation time of all occupants using the corresponding floor from an evacuation point of view. Method: The evacuation simulation (Pathfinder) was used to investigate how the change in doorway width affects the evacuation time of occupants. Result: It was found that as the effective width of the doorway became larger than the minimum standard of 90cm, the evacuation time to the evacuation stairs was shortened. This is also proof that the effective width of the evacuation stair entrance can be appropriately applied differently depending on the number of occupants on the floor. Conclusion: In the future, in order to secure evacuation safety of occupants, it is judged that the effective width standard for the exit of the evacuation stairway considering the total number of occupants by use is necessary. In addition, it is expected that the evacuation efficiency of occupants can be greatly increased if various effective width standards for entrances are made according to the number of occupants by use through research and experiments.