• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.4
• /
• pp.177-183
• /
• 2011

This study intends to investigate patients' exact exposure doses by comparatively measuring ESD (Entrance Surface Dose) with the DAP meter, which excludes scattered rays, and ESD with the Xi multifunction meter, which includes scattered rays, by posture changes for Esophagography test and UGI test. The materialwere examined through Sonialvision-SafireII SPEC overtube system. ESD was measured by using the DAP meter, and as a tool to measure ESD including scattered rays on the plane of incidence of human phantom, the Xi multifunction meter was used. The average fluoroscopic time of Esophagography test was 4.192 minutes and the average number of images was 47.7, while the average fluoroscopic time of UGI test was 6.881 minutes and the average number of images was 37.8. The ratios of the incident dose of DAP meter and the ESD of Xi meter were calculated bydividing the fluoroscopic time and the number of images by each posture change. As for Esophagography test, the dose increased by 21.6~55.5% in the fluoroscopic test and by 4.8~24.7% in the spot test. In the front spot test, however, the does increased by as little as 5.3%. As for UGI test, the dose increased by 21.1~49.5% in the fluoroscopic test and by 10.1~34.9% in the spot test. It is expected that measuring doses in consideration of scattered rays by posture changes will be an important index in evaluating and managing patients' exact exposure doses for each test above. Furthermore, it is judged that this sort of study is inevitable and desirable to reduce patients' exposure doses after all.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.443-448
• /
• 2015

The attractant effect to Platypus koryoensis (Murayama), an insect vector of Korean oak wilt disease, was determined using a multi-funnel trap and trap logs treated with ethanol and ethanol extract of the bark of the Mongolian oak Quercus mongolica (Fisher). The number of entrance holes in ethanol and bark ethanol extract treatments was higher than that in the control (blank bottle). However, the number of entrance holes in ethanol and bark ethanol extract treatments was not significantly different. The number of entrance holes in the logs increased with increase in diameter of the logs. The lower part of the trap logs had significantly more number of entrance holes than that in the upper part (p < 0.05). The lower part of trap logs tends to be rarely exposed to direct sunlight resulting in desiccation of the logs, which in turn provides good conditions for microbial growth, a food source for P. koryoensis. The results show, that ethanol could be used effectively in the monitoring and maintenance of P. koryoensis because of the cheaper cost of ethanol than bark ethanol extracts, and thus, having a higher economical advantage. Further research of oak bark ethanol extracts is necessary to improve its efficiency.

• Journal of Korean Academy of Nursing
• /
• v.7 no.2
• /
• pp.95-106
• /
• 1977

I. Purpose of the study An ultimate objectives of entrance examination for the selection of students by the nursing school is to evaluate their abilities and readiness for the further study as a competent and professional nurse at the college. As a method to measure the above mentioned achievement Inchon Nursing College conducts personality test in addition to the college made entrance examination. The study amid to find out the correlation between personality test and academic achievement including clinic nursing practice through analysing the data and affecting factors for the purpose of improvement and desirable entrance examination system. II. Content and Method of the study Selected experimental groups were 36 students who were admitted to the college in 1973 and 35 senior students who enrolled in the second semester in 1976. Gathered date, personality test achievement academic achievement record in the college and achievement of clinic nursing practice, from the total number of 71 students were analysed for the clarification of their correlation. III. Findings of the study 1. It was revealed that the correlation between the entrance examination achievement and personality test was meaningful. 2. Found no significant correlation between personality test and academic achievement through 3 years. 3. It was revealed the meaningful correl, n between personality test and clinic nursing practice. 4. The most dominant affecting elements for the academic achievement was the 2 nd year academes achievement showing 91.39%. Approximately 8% were affecting for the 1 st year and 2 nd year academic achievement by the entrance examination achievement and personality test. 5. Achievement of clinic nursing practice was greatly affected by the 2 nd year clinic nursing practice with 81.26%. Achievement of the 3 rd year clinic nursing practice and personality test were affecting with approximately 15%.

• Journal of dental hygiene science
• /
• v.20 no.3
• /
• pp.126-135
• /
• 2020

Background: The purpose of this study is to investigate the effects of entrance exam stress on oral health behaviors and subjective oral health status in female high school students. Methods: A self-reported questionnaire was administered to 216 female high school students in the Gwangju area. We performed an independent t-test, one-way analysis of variance (ANOVA), Pearson's correlation coefficient, and multiple regression analysis using the SPSS/WIN 21.0 program. Results: The average of the entrance exam stress was 2.73, and among the sub-areas, the tension for exam/poor stress was the highest with 3.21. As a result of analysis of general characteristics and subjective oral health status, oral mucosal disease was lower in family income level (p<0.05), bad breath was significantly higher with lower academic performance (p<0.001) and family income level (p<0.05). As a result of oral health behavior and subjective oral health status analysis, dental caries has more than 4 times of caries snacks (per week) (p<0.05), bad breath was found to be more perceived when the average number of daily brushing was 2 or less (p<0.01). Factors affecting subjective oral health status were that dental caries was a patients pressure stress (β=0.202); temporomandibular disorder (β=0.227), xerostomia (β=0.342), and oral mucosal disease (β=0.190) were insufficient spare time; bad breath was academic performance (lower) (β=0.231) and insufficient spare time (β=0.184). There was a statistically significant positive correlation between the subjective oral health status and the subarea of entrance exam stress, excluding future uncertainty stress. Conclusion: It is considered that oral health education should be conducted to prevent oral diseases for students with high parental pressure and insufficient spare time stress as well as finding practical ways to reduce entrance stress.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.229-236
• /
• 2016

Background: In order to manage the patient exposure dose in X-ray diagnosis, it is preferred to evaluate the entrance skin dose; although there are some evaluations about entrance skin dose, a small number of report has been published for direct measurement of patient. We think that a small-type optically stimulated luminescence (OSL) dosimeter, named nanoDot, can achieve a direct measurement. For evaluations, the corrections of angular and energy dependences play an important role. In this study, we aimed to evaluate the angular and the energy dependences of nanoDot. Materials and Methods: We used commercially available X-ray diagnostic equipment. For angular dependence measurement, a relative response of every 15 degrees of nanoDot was measured in 40-140 kV X-ray. And for energy dependence measurement, mono-energetic characteristic X-rays were generated using several materials by irradiating the diagnostic X-rays, and the nanoDot was irradiated by the characteristic X-rays. We evaluated the measured response in an energy range of 8.1-75.5 keV. In addition, we performed Monte-Carlo simulation to compare experimental results. Results and Discussion: The experimental results were in good agreement with those of Monte-Carlo simulation. The angular dependence of nanoDot was almost steady with the response of 0 degrees except for 90 and 270 degrees. Furthermore, we found that difference of the response of nanoDot, where the nanoDot was irradiated from the randomly set directions, was estimated to be at most 5%. On the other hand, the response of nanoDot varies with the energy of incident X-rays; slightly increased to 20 keV and gradually decreased to 80 keV. These results are valuable to perform the precise evaluation of entrance skin dose with nanoDot in X-ray diagnosis. Conclusion: The influence of angular dependence and energy dependence in X-ray diagnosis is not so large, and the nanoDot OSL dosimeter is considered to be suitable dosimeter for direct measurement of entrance surface dose of patient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.1-8
• /
• 2019

In the rapidly aging society, the number of wheelchair users is increasing steadily. On the other hand, it is almost impossible for a disabled person using a wheelchair to use express buses. Therefore, it is necessary to develop an express bus that can secure the rights of wheelchair users. For these special types of express buses, it is required to develop a special entrance and lift system. The development of a wheelchair entrance system for the express buses requires design modification, retrofit, and reinforcement of the bus frame. This study evaluated the structural integrity of an entrance system for wheelchair users using a finite element method. Torsional stiffness and modal analysis were performed through structural analysis. Through sensitivity analysis, optimization was performed to reduce the weight of the frame. These results on the wheelchair entrance system are expected to be utilized in the vehicle modification and welfare industries.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.861-869
• /
• 1986

A numerical study has been conducted on the development of the velocity and temperature fields in a laminar flow through an eccentric annular duct. A bipolar coordinates system is adopted, and a numerical program is developed to analyze 3-dimensional parabolic flow problems. In the analysis of the velocity field, the entrance length has been defined as the distance where the axial pressure gradient is greater than that of the developed velocity field by 5%. The dimensionless hydrodynamic entry length increases with increasing eccentricity. In the transverse flow fields, the reverse flow region along the wall due to the developing axial velocity near the entrance of the duct is found. In the analysis of the temperature field, the thermal entry length has been defined as the axial distance where the mean fluid temperature is 5% less than that of the developed temperature field. The dimensionless thermal entry length increases as eccentricity or Prandtl number increases. The overshoot of the mean Nusselt number over the developed value at the zero-temperature wall is encountered, and the rate of the overshoot increases with the increase of the eccentricity and Prandtl number.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.533-542
• /
• 1999

In this study the flow characteristics of developing turbulent pulsating flows in a square-sec-tional 180。 curved duct are investigated experimentally. The experimental study of air flow in a square-sectional curved duct is carried out to measure axial velocity distribution secondary flow velocity profiles and wall shear stress distributions by using a Laser Doppler Velocimetry system with the data acquisition and processing system of Rotating Machinery Resolver (RMR) and PHASE software at the entrance region of the duct which is divided into 7 sections from the inlet(${{\o}}=0_{\circ}$) to the outlet (${{\o}}=180_{\circ}$) in $30_{\circ}$ intervals. The results obtained from the study are summarized as follows: (1) The time-averaged critical Dean number of turbulent pulsating flow(De ta, cr) is greater than $75{\omega}+$ It is understood that the critical Dean number and the critical Reynolds number are related to the dimensionless angular frequency in a curved duct. (2) Axial velocity profiles of turbulent pulsating flows are of an annular type similar to those of turbulent stead flows. (3) Secondary flows of trubulent pulsating flows are strong and complex at the entrance region. As velocity amplitudes(A1) become larger secondary flows become stronger. (4) Wall shear stress distributions of turbulent pulsating flows in a square-sectional $180_{\circ}$ curved duct are exposed variously in the outer wall and are stabilized in the inner wall without regard to the phase angle.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.431-438
• /
• 2019

In this research, the proper number of entrances in the evacuation facilities for civil and military personnel was determined by using parametric study and regression analysis. The current standards on the emergency evacuation facility only set the number of possible evacuees and the architectural floor area after the evacuation have been completed. On the other hand, there are needs to consider the dynamic standards along with allowable evacuation time such as the number of entrance, staircases and so on rather than the static standards such as the floor area. The number of entrances and their location are required in order to account for the allowed evacuation time of particular number of people in a set area. The results of this research could be contributed to the standards which should contain the dynamic conditions associated with evacuation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.3
• /
• pp.177-186
• /
• 2003

In the present study, the flow characteristics of developing turbulent flows are investigated at the exit region of a square cross-sectional 180" curved duct with dimensions of 40mm$\times$40mm$\times$4000mm (height $\times$ width $\times$length). Smoke particles produced from mosquito coils were used as seed particles for the LDV measurement. Experiments were carried out to measure axial velocity profiles, shear stress distributions and entrance lengths by using an LDV system and Rotating Machinery Resolver RMR with PHASE software. Experimental results clearly show that the time-averaged Reynolds number does not affect oscillatory flow characteristics because the turbulent components tend to balance the oscillatory components in the fully developed flow region. Also, the velocity profiles are in good agreement with 1/7power law such as the results of steady turbulent flows. The turbulent intensity linearly increases along the walls and is slightly higher, especially in the period of deceleration. On the other hand, the LDV measurements show that shear stress values in slightly higher in the period of deceleration due to the flow characteristics in the exit region. The entrance length where flows become stable appears at the point that is 40 times the length of hydraulic diameter.eter.