• 제목/요약/키워드: Entrance System

검색결과 721건 처리시간 0.022초

우리나라 주요국의 대학 입학 수학 시험문제 비교 연구 (A Study on the Mathematics Examination of the College Entrance Examinations in Several Countries)

  • 이재학;조승제;박선화;박혜숙
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제43권4호
    • /
    • pp.349-379
    • /
    • 2004
  • In Korea, the new system of college entrance examination is established and it will be conducted from the year 2005. There are many worries for the mathematics examination of the new system in the society of mathematics in Korea. In this study, we compare the characteristics of the mathematics examination for the college entrance examination of Korea to those of China, Japan, France, England and German. From this comparison, we point out some predictable problems of the new system of Korea and suggest some complemental methods.

  • PDF

지중송전계통에서 절연접속함 위치 및 접지방식 변경의 효용성 평가 (Effectiveness Evaluation According to Change of IJ Joint Box Location and Grounding System in Underground Transmission System)

  • 고광만;이종범
    • 전기학회논문지
    • /
    • 제64권2호
    • /
    • pp.247-253
    • /
    • 2015
  • Dielectric breakdown accidents have been mainly occurred in the vicinity of service entrance section in underground power transmission systems. One cause among them is due to the excessive component value of sheath located around service entrance of cable. In this paper, as one of the alternative to prevent these accidents, the change of cross bond grounding system and the location change of IJ(Insulation Joint) are suggested. Also, to evaluate effectiveness of this changing system, circulating current and induced voltage of sheath were analyzed in steady and transient state. By comparison of the analytical results for the several possible changing systems, a grounding system and location of IJ which has the smallest sheath component values is proposed. In this paper, analysis to evaluate the proposed system is carried out by EMTP/ATPDraw. It can be used as a valuable operational material to prevent accident of the service entrance section in underground power transmission system.

점탄성 특성을 가진 폴리머용액의 난류유동 열적입구길이에 관한 실험적 연구 (An experimental study on the thermal entrance lengths for viscoelastic polymer solutions in turbulent tube flow)

  • 유상신;황태성;엄정섭
    • 대한기계학회논문집
    • /
    • 제12권5호
    • /
    • pp.1189-1196
    • /
    • 1988
  • 본 연구에서는 내경이 각각 8.5mm와 10.3mm이며 무차원길이가 각각 710과 1158인 두 개의 시험관을 사용하는 유동장치를 제작하여 시험관 입구에서부터 유체역 학적 경계층(hydrodynamic boundary layer)과 열적 경계층(thermal boundary layer)이 동시에 발달하기 시작하는 경계조건을 형성하고 관벽에서 일정한 열 플럭스(constant heat flux)를 발생하는 조건을 부여하였다. 퇴화현상(degradation)에 대하여 비교적 안정성을 가진 폴리아크라마이드(polyacrylamide) Separan Ap273을 수도물에 용해하여 제조한 폴리머용액으로 유동특성과 열전달특성을 실험하여 열적입구길이와 열전달특성 을 규명하고자 한다.

정4각덕트의 입구영역에서 난류 비정상유동에 대한 이론과 실험적 연구 (A Theoretical and Experimental Study on the Developing Turbulent Unsteady Flows in the Entrance Region of a Square Duct)

  • 고영하
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권5호
    • /
    • pp.643-651
    • /
    • 1998
  • Turbulent unsteady flows in the entrance region of a square duct are investigated with a hot-wire anemometer system. The velocity waveforms the mean and turbulence components of the axial velocity and the entrance length are obtained as a major characteristics of the developing turbulent unsteady flows. An inviscid flow theory is presented to describe the developing axial mean velocity profiles. A good agreement is seen between the measured and theoretically predicted values. The propagation of turbulence generated near the entrance of the square duct is satisfactorily approximated by an empirical correlation of the propagation of turbulence proposed so far. The local turbulence intensi-ty is found to be a little smaller in the accelerating phase than in the decelerating phase. The entrance length is about 60 times as large the hydraulic diameter.

  • PDF

이중 출입통제 시스템을 이용한 내부 시설 보안성 확보 방안 (A Study of Guranteeing Security of A Building by Uinsg the Double Entrance-Control System)

  • 김민수;이동휘;김귀남
    • 융합보안논문지
    • /
    • 제12권4호
    • /
    • pp.123-129
    • /
    • 2012
  • 보안에 대한 인식 부족으로 인해 발생되는 내부 보안위협은 허가된 인원만이 출입해야 하는 보안지역에 대한 보안성 미확보로 인해 나타난다. 허가되지 않은 인원이 출입하여 내부 시스템에 대하여 자유로운 접근 및 무분별한 사용으로 인한 보안 위협에 노출되기 때문이다. 이러한 보안위협에 대하여 기존의 RFID 카드 인증 방식과 적외선 거리측정 센서를 이용한 출입통제시스템 등의 보안성 확보방안에 대한 연구가 이루어져 왔지만, 각 방식에 나타난 문제점으로 보안성을 확보하기 어렵다. 따라서 본 연구는 이를 보완하기 위하여 기존의 출입통제 시스템과 이중 출입통제 시스템을 비교하여, 내부 시설의 보안성 확보를 위한 방안을 제시하였다.

예비교사와 고등학교 교사의 인식을 통한 교육대학 입학과 사교육의 관련성 (The Relationship between Admission to University of Education and Private Education through Perceptions of Pre-service Teachers and High School Teachers)

  • 이종학;김유영;윤마병
    • 한국콘텐츠학회논문지
    • /
    • 제19권11호
    • /
    • pp.132-143
    • /
    • 2019
  • 본 연구는 교육대학의 입시 제도가 사교육과 어떤 관련성이 있는지를 알아보고, 사교육 경감을 위한 교육대학 입시 제도의 개선 방향에 대해서 탐색하고자 하였다. 이를 위해 현장에서 대학 입시를 담당하는 대구·경북 지역의 고등학교 3학년 담임교사들과 교육대학 입시를 실제적으로 경험한 D 교육대학 1학년 재학생을 대상으로 교육대학 입학 전형 요소와 사교육과의 관련성에 대한 인식을 알아보았다. 연구 결과, 교육대학 입시에서 내신 강화가 공교육을 강화하는 효과도 있지만, 내신이 중요하다는 인식이 강하게 작용하여 오히려 사교육을 강화하는 역작용이 발생할 여지가 있다는 의견이 많았다. 농촌 지역인 경상북도와 대도시인 대구 지역의 전형 요소별 인식 차이가 커서 지역 사회의 특성을 고려한 전형과 각 교육대학이 위치한 지역별 특성을 반영한 입시 제도의 도입이 필요하다. 정시 전형의 요소별 점수 반영 비율에 대해서 3학년 담임교사들은 수능 점수 반영 비율을 낮추어야 한다는 의견을 제시했으며, 이와 함께 면접 반영 비율의 상향을 주장하였다. 본 연구의 결과를 통해 사교육 감소를 위한 교육대학 입시제도의 개선 방향에 대한 시사점은 서류 평가의 공정성 확보가 요구되며, 면접의 강화와 함께 나타날 수 있는 사교육 문제의 해결을 위해서 면접의 방향 및 문항에 대한 공개가 뒤따라야 한다는 것이다.

전국 대학 입시정보 웹사이트의 개인화 정보 구조 시스템 설계를 위한 가이드라인 (A Guideline for Personalized Information Architecture(PIA) System of National College Entrance Information Web-site)

  • 김남훈;백유정
    • 한국콘텐츠학회논문지
    • /
    • 제5권6호
    • /
    • pp.152-162
    • /
    • 2005
  • 입시 정보에 대한 정보의 양이 방대하고 콘텐츠 범위가 광범위한 조건은 사용자에게 정보를 찾고, 수집하고, 비교하는 데 있어 어려움을 겪을 수밖에 없는 환경을 야기한다. 이에 본 연구에서는 입시 사이트의 사례로 대학, 입시 정보를 사용자가 어떻게 수집하고 분류하고 비교하는지에 대한 사용성 평가를 통해 사용자들의 어려움과 니즈를 파악하고 동시에 개인화 정보 수집에 대한 필요성을 검증하여 개인화 인포메이션 아키텍처 시스템을 적용한 입시정보 웹사이트 제작 가이드라인을 제시하고자 한다. 즉, 본 연구는 인포메이션 아키텍처에 대하여 사용성 평가를 통해 사용자 중심의 개인화 정보 구조 설계 시스템(PIA:Personailized Information Architecture)설계를 위한 가이드라인을 제시하는 것이 목적이다.

  • PDF

EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN A NARROW RECTANGULAR CHANNEL FOR UPWARD AND DOWNWARD FLOWS

  • Jo, Daeseong;Al-Yahia, Omar S.;Altamimi, Raga'i M.;Park, Jonghark;Chae, Heetaek
    • Nuclear Engineering and Technology
    • /
    • 제46권2호
    • /
    • pp.195-206
    • /
    • 2014
  • Heat transfer characteristics in a narrow rectangular channel are experimentally investigated for upward and downward flows. The experimental data obtained are compared with existing data and predictions by many correlations. Based on the observations, there are differences from others: (1) there are no different heat transfer characteristics between upward and downward flows, (2) most of the existing correlations under-estimate heat transfer characteristics, and (3) existing correlations do not predict the high heat transfer in the entrance region for a wide range of Re. In addition, there are a few heat transfer correlations applicable to narrow rectangular channels. Therefore, a new set of correlations is proposed with and without consideration of the entrance region. Without consideration of the entrance region, heat transfer characteristics are expressed as a function of Re and Pr for turbulent flows, and as a function of Gz for laminar flows. The correlation proposed for turbulent and laminar flows has errors of ${\pm}18.25$ and ${\pm}13.62%$, respectively. With consideration of the entrance region, the heat transfer characteristics are expressed as a function of Re, Pr, and $z^*$ for both laminar and turbulent flows. The correlation for turbulent and laminar flows has errors of ${\pm}19.5$ and ${\pm}22.0%$, respectively.

유한요소해석을 이용한 전자식 주차브레이크용 헬리컬 기어의 금형 도입부 각도에 따른 냉간 전방압출 성형성 분석에 관한 연구 (Study on Cold Forward Extrusion Formality Analysis along with Tool Entrance Angle of Helical Gear for Electronic Parking Brake Using Finite Element Analysis)

  • 김병길;이현구;조재웅;정광영;전성식
    • 한국정밀공학회지
    • /
    • 제32권11호
    • /
    • pp.977-982
    • /
    • 2015
  • This study uses finite element analysis to evaluate the forming load of tool entrance angle of the cold forward extrusion molding process of helical gear; this can replace the spur gear applied to the Electronic Parking Brake (EPB) system. A cold forging process is often used in the automobile industry as well as in various industrial machines due to its high efficiency. Finite element analysis is frequently used when interpreting results of the forging process. Formality was evaluated by calculating tooth profile filling rate of helical gear. Change in required forming load was investigated when the entrance angle of forward extrusion tool die was changed from $30^{\circ}$ to $60^{\circ}$, also by finite element analysis. We suggest suitable tool entrance angles.

스웨덴의 유아학급 설치 사례를 통해 살펴본 취학연령 하향화 대처 방안 (The Introduction of a Preschool Class as an Alternative to Lowering School Entrance Age: A Case Study of Sweden)

  • 한유미
    • 한국생활과학회지
    • /
    • 제19권4호
    • /
    • pp.589-599
    • /
    • 2010
  • When the Korean government announced the lowering of the school entrance age from 6 to 5 years in an effort to increase the fertility rate, one candidate for the Seoul mayor rode on the slogan, 'one dong, one public kindergarten'. This study attempted to show the introduction of a preschool class for six-year-olds being used as analternative to lowering school entrance age in Sweden. First, the current state of preschool class, the Early Childhood Education and Care, and the education system in Sweden were described. Next, the background for the introduction of the preschool classes was analyzed. Thirdly, the effects of preschool class were evaluated from the perspectives of 6 year-olds as well as the institutiona land social status of the ECEC. Results from this study imply not only that the lower school entrance age policy should be abolished but also preschool classes could be considered as an alternative.