• The Journal of Korea Robotics Society
• /
• v.4 no.2
• /
• pp.130-138
• /
• 2009

Recently, people tracking technology is being required to various area including security application. This paper suggests a method to track people with multiple laser scanners to detect the waist part of human. Multi-target model and Kalman filter based estimation are employed to track the human movement. The proposed method is applied to a novel system to monitor the entrance area and to filter out the trespasser to pass through the door without identification. Experiments for various cases are performed to verify the usefulness of the developed system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.319-326
• /
• 2002

During the construction period of submarine shield tunnel, which is built firstly in very soft marine clay layer 40m deep in Korea, wide range problems were encountered such as safe launching against high earth pressure at shield entrance, technique of shield face pressure control when passing through complex multi-layered soils This paper introduces successful construction practice through development of state-of-the-art construction method and field monitoring.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.283-292
• /
• 2013

A calcareous rock slope failed during excavation of the slope for construction of a tunnel entrance. The slope is located at the construction site for widening highway in Yeongwol, Korea. Field surveys, laboratory tests, and numerical analyses were performed to determine the reason for the slope failure. The numerical analysis revealed that the safety factor of the slope before construction of the entrance was less than 1, and that this decreased after construction. After construction of the entrance, the sliding zone of the slope increased and slope stability decreased because the shear strain and plastic zone in the slope over the tunnel entrance showed an increase relative to the lower part of the slope. To enhance the stability of the slope for construction of the tunnel entrance, countermeasures such as rock bolts, rock anchors, and FRP (Fiber glass Reinforced Plastic) grouting were adopted in light of the field conditions. Serial field monitoring performed to confirm the reinforcing effects of the adopted countermeasures revealed a small amount of horizontal deformation of the slope soils, most of the elastic deformation that can regain its former value. In addition, the axial forces of the rock bolt and anchor were more strongly affected by slope excavation during construction of the tunnel entrance than by tunnel excavation or the rainy season, and the axial forces tended to converge after excavation of the tunnel. Therefore, we can confirm that the slope is currently safe.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.19-28
• /
• 2016

This study was to design the optimal locations of the water level monitoring to quantify the agricultural water use in irrigation area supplied from an agricultural reservoir. In most of agricultural areas without TM/TC (Tele-Monitoring and Tele-Control) or monitoring network, irrigation water have been supplied on conventional experience and agricultural reservoir have been operated based on the operating simulation results by HOMWRS (Hydrological Operation Model for Water Resources System). Therefore, this study quantified the amount of agricultural water use in an irrigation area (Musu Reservoir, Jincheon-gun) by establishing water level monitoring network and analyzed the agricultural water saving effect. According to the evaluation of the economic values for water saving effect, the saving agricultural water of 1.7 million ton was analyzed to have economic values of 0.85 million won as water for living, and 1.78 million won as water for industrial use. It is identified to secure economic feasibility of the new water monitoring network by establishing one monitoring point in the entrance, irrigation area and endpoint through the economic analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.171-179
• /
• 2022

This paper introduces a monitoring and tracking system for corona19 confirmed patients based on the collected data by installing a device that can manage the access list at the entrance to each building on the campus. The existing QR-based electronic access list can't measure the temperature of the person entering the building and it is inconvenient that members have to scan their QR codes with a smartphone. In addition, when the state manages information about confirmed patients and contacts on campus, it is not easy for members to quickly share and track information. These could lead to cases where a person is in close contact with an infected person developing another patient. Therefore, this paper introduces a device using face recognition library and a temperature sensor installed at the entrance of each building on the campus, enabling the administrator to monitor the access status and quickly track members of each building in real-time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.943-950
• /
• 2010

A secure entrance system is complicated because it should have various functions like monitoring, logging, tracing, authentication, authorization, staff locating, managing staff enter-and-leave, and gate control. In this paper, we built and applied a secure entrance system for a domestic nuclear plant using Aspect Oriented Programming(AOP) and design pattern. Using AOP has an advantage of clearly distinguishing the role for each functional module because building a system separated independently from the system's business logic and security logic is possible. It can manage system alternation flexibility by frequent change of external environment, building a more flexible system based on increased code reuse, efficient functioning is possible which is an original advantage of AOP. Using design pattern enables to design by structuring the complicated problems that arise in general software development. Therefore, the safety of the system can also be guaranteed.

• Journal of Multimedia Information System
• /
• v.3 no.3
• /
• pp.63-68
• /
• 2016

Environmental downtime produces a significant cost to organizations and makes them unable to do business because what happens in the data center affects everyone. In addition, the amount of electrical energy consumed by data centers increases with the amount of computing power installed. Installation of physical Information Technology and facilities related to environmental concerns, such as monitoring temperature, humidity, power, flood, smoke, air flow, and room entry, is the most proactive way to reduce the unnecessary costs of expensive hardware replacement or unplanned downtime and decrease energy consumed by servers. In this paper, we present remote system for monitoring datacenter implementing using open-source hardware platforms; Arduino, Raspberry Pi, and the Gobetwino. The sensed data displayed through Arduino are transferred using Gobetwino to the nearest host server such as temperature, humidity and distance every time an object hitting another object or a person coming in entrance. The raspberry Pi records the sensed data at the remote location. The objective of collecting temperature and humidity data allows monitoring of the server's health and getting alerts if things start to go wrong. When the temperature hits $50^{\circ}C$, the supervisor at remote headquarters would get a SMS, and then they would take appropriate actions to reduce electrical costs and preserve functionality of servers in data centers.

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.488-498
• /
• 2003

By LC/MS/MS, the analytical method of sildenafil and its analogues (homosildenafil, vardenafil and tadalafil) used as used medical treatment of impotence was established. electrosprary ionization (ESI) and atmospheric pressure chemical ionization (APCI) as a ionization method were applied. Several parameter were varied and the sensitivity and reproducibility were compared. In LC/ESI-MS method, capillary voltage, cone voltage, extractor, entrance and RF lens to create appropriate productr ions for multiple reaction monitoring (MRM) were variable parameter, but the formation of the other product ions except the precursor ion could not detect. And the value of entrance, collision energy, exit, corona voltage, cone voltage, extractor, RF lens, cone gas, and desolvation gas in APCI mode were varied, only the creation pattern of fragment ions by the change of RF lens value were detected, and the limit of detection was decreased due to the increase of S/N. Ten millimole ammonium formate (pH 4.8):acetonitrile=70:30 by isocratic elution in HPLC system was shown the maximum sensitivity in MS, the detection limit of sildenafil, homosildenafil, vardenafil and tadalafil obtained by ESI-MRM were 0.10, 0.025, 0.025, and $0.25{\mu}g/mL$ at S/N>5, respectively.

• The Korean Journal of Applied Statistics
• /
• v.32 no.3
• /
• pp.423-434
• /
• 2019

An important issues in Korea society in 2018 was the revision of the university entrance examination system. Among the discussions, in order to grasp what the issue of admission officer system is, attention was focused on the function of media such as monitoring and criticism as well as the tried topic analysis of related news articles. As a result, the reorganization of the College Scholastic Ability Test (CSAT) was derived and showed the sensitivity of Korean society towards the CSAT. Topics directly related to the admission officer system were the selection factor and fairness of the university entrance examination system in relation to the selection factor.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.7-18
• /
• 2019

The Chosun Dynasty established and implemented measures to prevent Japanese invasion into the southern coast. To this end, the number of naval vessels and the number of ships were increased, and a shipyard(船所) was constructed to protect the safety of the vessels. The shipyard is a port facility where military vessels are anchored and repaired, as well as public facilities that are needed for military training on public and land, as well as facilities for storing supplies and equipment needed for ships on land and defense at the port entrance. Despite being such an important facility for national defense, Shipyard has not been noticed. Studies have shown that the position of shipyard is divided into the riverside type and the riverbank type, which is due to the topographical features of Korea. The repair cycle of naval vessels, the carrying out of Yeonhun(prevent the water from decaying the part of the ship, a raw tree was burned to smoke) and the place of sea training also affected the construction of the Gul River(掘江). The space structure of shipyard is divided into port entry facilities for monitoring and controlling at the entrance to the harbor, border facilities for folding and repairing military vessels, and land facilities for holding land exercises and administrative work of military vessels and military equipment.