• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.23.1-23.9
• /
• 2018

Objectives: This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Materials and Methods: Sixty maxillary canines were divided into 6 groups (n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Results: Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA (p < 0.05). US improved the push-out bond strength for all the cements (p < 0.05). Conclusions: The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.789-799
• /
• 2004

An experimental study is conducted to investigate the effects of duct corrugation angle on heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger application. Local heat/mass transfer coefficients on the wavy duct sidewalls are determined by using a naphthalene sublimation technique. The corrugation angles(${\alpha}$) of the wavy ducts are 145$^{\circ}$, 130$^{\circ}$, 115$^{\circ}$ and 100$^{\circ}$. And the Reynolds numbers based on the duct hydraulic diameter vary from 300 to 3,000. The results show that at the low Re(Re $\leq$1000), the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, high heat/mass transfer regions are formed on both pressure-side and suction-side walls. At the high Re(Re $\geq$ 1000), these secondary flows are vanished with helping flow transition to turbulent flow and the regions which show high heat/mass coefficients by flow reattachment are formed on suction side. As corrugation angle decreases, the local peak Sh induced by Taylor-Gortler vortices increase at Re $\leq$1000. At high Re(Re $\geq$ 1000), by the existence of different kind of secondary flows called Dean vortices, non-uniform Sh distribution appears along spanwise direction at the narrow corrugation angle (${\alpha}$=100$^{\circ}$). Average Sh also increase by the enhanced effect of secondary vortices and flow reattachment. More pumping power (pressure loss) is required with the smaller corrugation angle due to the enhancement of flow instability.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• Composites Research
• /
• 제19권3호
• /
• pp.23-28
• /
• 2006

탄소나노튜브로 강화된 구리기지 적층 나노 복합재료를 제작하였고, 마이크로 인장 시험기를 이용하여 기계적 물성을 평가하였다. 탄소나노튜브 층이 강화제로 사용된 샌드위치 형태의 적층 구조는 탄소나노튜브의 선택적인 딥코팅 방법과 전해도금 방법을 이용하여 제작되었다. 본 연구에서 정립한 공정을 사용하여 제작된 나노 복합재료는 구리 기지만을 사용한 재료에 비해 기계적 물성이 향상되었다. 이는 평면내 방향으로 균일하게 분산된 탄소나노튜브에 의해 하중 분산 용량이 증가되었기 때문이며, 두께 방향으로 적층된 구리 기지를 탄소나노튜브 층이 상호 지지하여 인장물성이 강화됨을 확인하였다. 기능적 재료의 제작에 있어 적층 구조는 다양한 분야에 적용될 수 있으며, 본 연구에서는 입자강화복합재료 강화제의 적용 가능성을 확인하였다.

• 한국병원경영학회지
• /
• 제29권2호
• /
• pp.18-36
• /
• 2024

This study delved into the complex nature of medical services as experience goods and trust services, investigating the profound impact of online word-of-mouth on medical consumers' decisions to visit hospitals. Considering the restrictive legal framework for medical advertising, consumers are increasingly dependent on unrestricted sources of information like online reviews. This research aimed to provide empirical evidence for the significant role online word-of-mouth plays in hospital selection. Utilizing data from Naver reviews, hospital choice factors were classified based on the Kano model, revealing the subtle yet significant influence that word-of-mouth has on consumers' hospital visit intentions beyond merely positive or negative messages. In particular, the study provided insights into how the categorized positive and negative information, along with the presence or absence of emotional expression, affects the efficacy of word-of-mouth. The experiment targeted medical consumers aged over 20 and, through analysis using the SPSS statistical program, yielded important findings. The direction of online word-of-mouth, the presence of emotional expression, and the interaction of Kano attributes all created significant differences in hospital visit intentions. Notably, emotional expression included in negative word-of-mouth concerning one-dimensional attributes markedly decreased visit intentions, whereas the absence of emotional expression in attractive attributes actually enhanced reliability and increased visit intentions. These findings offer critical implications for redefining strategies in medical marketing and online review management. The discoveries of this study underscore the importance of active engagement and strategic management of online reviews by medical service providers, urging careful consideration of the various elements of online word-of-mouth that influence medical consumers' hospital visit intentions.

• Ocean and Polar Research
• /
• 제43권4호
• /
• pp.307-320
• /
• 2021

Udo Rhodolith Beach is a small-scale, mixed sand-and-gravel beach embayed on the N-S trending rocky coast of Udo, Jeju Island, South Korea. This study analyzes the short-term topographic changes of the beach during the extreme storm conditions of four typhoons from 2016 to 2020: Chaba (2016), Soulik (2018), Lingling (2019), and Maysak (2020). The analysis uses the topographic data of terrestrial LiDAR scanning and drone photogrammetry, aided by weather and oceanographic datasets of wind, wave, current and tide. The analysis suggests two contrasting features of alongshore topographic change depending on the typhoon pathway, although the intensity and duration of the storm conditions differed in each case. During the Soulik and Lingling events, which moved northward following the western sea of the Jeju Island, the northern part of the beach accreted while the southern part eroded. In contrast, the Chaba and Maysak events passed over the eastern sea of Jeju Island. The central part of the beach was then significantly eroded while sediments accumulated mainly at the northern and southern ends of the beach. Based on the wave and current measurements in the nearshore zone and computer simulations of the wave field, it was inferred that the observed topographic change of the beach after the storm events is related to the directions of the wind-driven current and wave propagation in the nearshore zone. The dominant direction of water movement was southeastward and northeastward when the typhoon pathway lay to the east or west of Jeju Island, respectively. As these enhanced waves and currents approached obliquely to the N-S trending coastline, the beach sediments were reworked and transported southward or northward mainly by longshore currents, which likely acts as a major control mechanism regarding alongshore topographic change with respect to Udo Rhodolith Beach. In contrast to the topographic change, the subaerial volume of the beach overall increased after all storms except for Maysak. The volume increase was attributed to the enhanced transport of onshore sediment under the combined effect of storm-induced long periodic waves and a strong residual component of the near-bottom current. In the Maysak event, the raised sea level during the spring tide probably enhanced the backshore erosion by storm waves, eventually causing sediment loss to the inland area.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.333-338
• /
• 2006

Silk fibroin (SF) fiber from the Antheraea pernyi silkworm was treated with a 1.23 N iodine-potassium iodide ($I_2-KI$) aqueous solution, and the structure and physical properties were investigated to clarify the effects of the iodine treatment. The noticeably high weight gain value of SF fiber, about 25 wt% was attributed to the absorption of polyiodide ions in the form of $I_3{^-}\;and\;I_5{^-}$. Fourier transform infrared spectroscopy and X-ray diffraction measurements suggested that polyiodide ions mainly entered the amorphous region. In addition, a new sharp reflection on the meridional direction, corresponding to a period of $7.0{\AA}$, was observed and indicated the possibility of the formation of mesophase structure of ${\beta}$-conformation chains. Dynamic viscoelastic measurements showed that the damping tan ${\delta}$ peak at $270^{\circ}C$ gradually shifted to lower temperature in the iodinated SF fibers, suggesting an enhancement of the molecular motion of the fibroin chains induced by the presence of polyiodide ions. With heating above $254^{\circ}C$, the iodine component introduced intermolecular cross-linking of SF, and the melt flow of the sample was inhibited. The thermal decomposition stability of fibroin molecules was greatly enhanced by iodine treatment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.614-620
• /
• 2011

Railway intelligent transportation systems and related Ministry of Land and rail operating agency's railway informatization planning of information technology, effective through the use of management strategies to establish or run to support the systematic informatization investment that you want to execute work in progress, during and yet the institutional informatization of operations mainly in the form of efficiency is Chinhae. Accordingly, in order to promote the details of the final challenge of providing real-time information and the usefulness of this information collection is clearly for the railway sector by function of the components is necessary to distinguish. In this paper, the details of the plan goals, promoting convenient rail-based real-time information, to promote optimal gohyoeuleul railways, railway safety and comfort, was defined as three. Selection of each goal, because the direction of vision and ITS around the railroad center of road users by highlighting the benefits of the railroad's traffic information center user switching, real-time delivery of information diversity (enhanced content) that can increase the capacity of line train operating systems, enhancing the safety management system introduced in the monitoring system and is a railroad crossing. Because urban railway project in accordance with the goal of decreasing the annual rate of the train support, and the average passenger wait time savings, increased future demand for railway, rail safety, including securing the expected effects may occur.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.373-394
• /
• 2016

The postbuckling behavior of laminated composite plates and shells, subjected to various shear loadings, is presented, using a modified 8-ANS method. The finite element, based on a modified first-order shear deformation theory, is further improved by the combined use of assumed natural strain method. We analyze the influence of the shell element with the various location and number of enhanced membrane and shear interpolation. Using the assumed natural strain method with proper interpolation functions, the present shell element generates neither membrane nor shear locking behavior even when full integration is used in the formulation. The effects of various types of lay-ups, materials and number of layers on initial buckling and postbuckling response of the laminated composite plates and shells for various shear loading have been discussed. In addition, the effect of direction of shear load on the postbuckling behavior is studied. Numerical results and comparisons of the present results with those found in the literature for typical benchmark problems involving symmetric cross-ply laminated composites are found to be excellent and show the validity of the developed finite element model. The study is relevant to the simulation of barrels, pipes, wing surfaces, aircrafts, rockets and missile structures subjected to intense complex loading.

• 전자통신동향분석
• /
• 제35권6호
• /
• pp.107-118
• /
• 2020

The smart city agenda aims to solve various problems arising in cities and promote the welfare and happiness of citizens by utilizing the new technologies of the 4th Industrial Revolution. Smart city policies have been promoted at the national level, but until now, policy implementations have not been effective enough to fundamentally affect citizens. To realize a more realistic and practical smart city, it is necessary to examine the problems occurring in the city in depth and set the direction and tasks of the smart city accordingly. Therefore, this study specifies the issues and problems faced in 12 sectors, including manufacturing, logistics, medical care, and safety. Next, by referring to the existing literature, a future smart city integration model is proposed that can respond to these problems. That is, future smart cities should create detailed services with enhanced efficiency, sustainability, strong risk management, safety, and satisfaction as the main goals. This study is meaningful in that it suggests a vision and tasks of smart cities that can solve problems in various sectors in a form that can be felt by the citizens.