• 산업경영시스템학회지
• /
• 제42권2호
• /
• pp.78-85
• /
• 2019

High variance observed in the measurement system can cause high process variation that can affect process capability badly. Therefore, measurement system analysis is closely related to process capability analysis. Generally, the evaluation for measurement system and process variance is performed separately in the industry. That is, the measurement system analysis is implemented before process monitoring, process capability and process performance analysis even though these analyses are closely related. This paper presents the effective concurrent evaluation procedure for measurement system analysis and process capability analysis using the table that contains Process Performance (Pp), Gage Repeatability & Reproducibility (%R&R) and Number of Distinct Categories (NDC). Furthermore, the long-term process capability index (Pp), which takes into account both gage variance and process variance, is used instead of the short-term process capability (Cp) considering only process variance. The long-term capability index can reflect well the relationship between the measurement system and process capability. The quality measurement and improvement guidelines by region scale are also described in detail. In conclusion, this research proposes the procedure that can execute the measurement system analysis and process capability analysis at the same time. The proposed procedure can contribute to reduction of the measurement staff's effort and to improvement of accurate evaluation.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.90-102
• /
• 1996

Process incapability index which is intended to evaluate the process capability by measuring process incapability provides more detailed information by dividing information about the process mean and variance. But when the target value is not consistent with the center of specification, it is very difficult to evaluate the process capability accurately. Thus it is necessary to improve the existing process incapability index. The improved process incapability index can identify the variation of the process faster than other process capability indices when applied firstly, to the precision process which can be affected sensitively by the change of the process, secondly, to the ordinary process where cost difference from the change of process is noticeable. By using subindices such as inaccuracy index and imprecision index, it is easier for quality manager to find where the cause of the variation of process is, and to take necessary action in advance.

• 시스템엔지니어링학술지
• /
• 제16권1호
• /
• pp.78-83
• /
• 2020

Recently, the use of domestic products securing domestic technology is encouraged, because of export restrictions of the countries or DMSMS(diminishing manufacturing sources and shortages). Domestic weapon systems are actively focused on the parts localization process of R&D projects based on Systems Engineering. However, it is the only way to do technical review for Systems Engineering process up to now. There is a case of application in Localization with Systems Engineering process, but the SE activity is not enough. This study is how to apply Systems Engineering process to Localization effectively based on real cases.

• 산업경영시스템학회지
• /
• 제31권3호
• /
• pp.117-124
• /
• 2008

Ultra-high voltage transformer industry has characteristic of small quantity batch production system by other order processing unlike general mass production systems. In this industry, observance of time deadline is very important in market competitive power security and company continued existence. The transformer winding is a process that rolls a coil is coated with an electric insulation material in order to generate the required voltage using the voltage fluctuation. The winding process is very important production process in the extra-high voltage transformer manufacturing industry because winding process is core process that occupy weight about half of whole process and is process that decide current ratio of transformer. This paper proposes a statistical calculation and control method of planned leadtime on the basis of real data and informations for the A company in transformer winding process. Moreover, we develop unit process scheduling system.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.69-78
• /
• 2001

This paper presents a process and operation planning system and an NC code post-processor for effective machining of press dies for production of cars. Based on the machining feature, major parts of press dies are categorized into 15 groups and a standard process plan is defined for each group. The standard process plan consists of a series of processes where a process is defined as a group of operations that can be done with one setup. Details such as cutting tools, cutting conditions, and tool paths are decided at the operation planning stage. At the final stage of process and operation planning, the NC code post-processor adjusts feedrates along the tool path to reduce machining time while maintaining the quality. The adjustment rule is selected based on the machining load estimated by virtual machining.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.294-302
• /
• 2012

Process mining is a useful methodology that can be used for extracting user patterns in log files in order to discover efficient or inefficient processes in organizations. In general, it is used to find and reduce differences between pre-defined processes and actually executed processes in an organization. In this paper, we propose a method to improve processes in PDM/PLM systems based on process mining. In order to improve and detect the inefficient processes, we gathered event logs from PDM/PLM systems and derived process models using several process mining techniques such as ${\alpha}$-algorithm mining, heuristics mining, and fuzzy miner. By comparing original process models with process mining results, it is possible to detect differences between predefined processes and real ones; thereby we can build improved process models for future application.

• 한국레이저가공학회지
• /
• 제10권3호
• /
• pp.15-24
• /
• 2007

In this paper laser micromachining system design process for commercialization is suggested. The constructed system design process is properly adjusted for laser micromachining area after tailoring engine process of system engineering process such as requirement analysis, functional analysis and allocation, system synthesis and system optimization process. In the current laser machining system design, system components and specifications are determined on the basis of experimental experience which a laser is being used in machining some materials as well as the current machining and research trend. In this paper, however, systematic process is suggested in addition to experimental experience, which the laser and system components and their specifications are decided in the process of definition of functional requirements and engine design variables of system to satisfy the customer's requirements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.1-5
• /
• 2011

To enter next process control, numerous approaches, including run-to-run (R2R) process control and fault detection and classification (FDC) have been suggested in semiconductor manufacturing industry as a facilitation of advanced process control. This paper introduces a novel type of optical plasma process monitoring system, called plasma eyes chromatic system (PECSTM) and presents its potential for the purpose of fault detection. Qualitatively comparison of optically acquired signal levels vs. process parameter modifications are successfully demonstrated, and we expect that PECSTM signal can be a useful indication of onset of process change in real-time for advanced process control (APC).

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.371-374
• /
• 2002

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)［P(3HB/V)］, by fed-batch culture of recombinant Escherichia coli harboring a plasmid containing the Alcaligenes latus polyhy-droxyalkanoate (PHA) biosynthesis genes, was examined in two pilot-scale fermentors with air supply only, In a 30 L fermentor having a XLa value of 0.11 S­$^1$, the final P(3HB/V) concentration and the P(3HB/V) content obtained were 29.6 g/L and 70.1 wt%, respectively giving a productivity of 1.37 g P(3HB/V)/L-h. In a 300 L fermentor having a XLa of 0.03 S­$^1$, the P(3HB/V) concentration and the P(3HB/V) content were 20.4 g/L and 69 wt%, respectively giving a productivity of 1.06g P(3HB/V)/L-h. These results suggest that economical production of P(3HB/V) is possible by fed-batch culture of recombinant E. coli in a large-scale fermentor having low KLa value.