• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.37-40
• /
• 2012

Process Offloading 기술은 동작 중인 어플리케이션의 일부를 보다 강력한 성능을 가진 다른 기기로 옮겨 실행하는 기술로써, 스마트폰과 같은 모바일 기기에 적용될 경우 어플리케이션의 수행속도를 향상시키고 배터리 소모 및 발열을 크게 줄일 수 있다. 본 논문에서는 기존의 연구를 조사 및 고찰하여 보다 효과적인 Process Offloading 아카텍처를 제시하고자 한다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1193-1198
• /
• 2005

The pre-assembly takes a large portion of the fabrication cost of steel bridges. In order to save the fabrication cost through the improvement of the conventional pre-assembling process, this research investigates a numerical pre-assembly simulation as an alternative to current pre-assembling process. The 3D laser scanning was utilized in site and measuring data for steel box were analyzed. The productivity of pre-assembly simulation system is compared with the conventional pre-assembling system. This paper identifies feasibility on the alternative pre-assembling process and then proposes the scheme of the pre-assembly simulation system development satisfying the current pre-assembly inspection of standards.

• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.606-611
• /
• 2016

Carbon dioxide injection is a widely known method of enhanced oil recovery (EOR). It is critical for the $CO_2$ EOR that the injected $CO_2$ to reach a condition fully miscible with oil. To reach the miscible point, a certain level of pressure is required, which is known as minimum miscibility pressure (MMP). In this study, a MMP prediction method using a process simulator is proposed. To validate the results of the simulation, those are compared to a slim tube experiment and several empirical correlations of previous literatures. Aspen HYSYS is utilized as the process simulator to create a model of $CO_2$/crude oil encounter. The results of the study show that the process simulator model is capable of predicting MMP and comparable to other published methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.563-569
• /
• 2015

For some low-frequency applications such as power-related circuits, NEM relays have been known to show better performance than MOSFETs. For example, in a step-down charge pump circuit, the NEM relays showed much smaller layout area and better energy efficiency than MOSFETs. However, severe process variations of NEM relays hinder them from being widely used in various low-frequency applications. To mitigate the process-variation problems of NEM relays, in this paper, a new NEM-relay charge pump circuit with the self-adjustment is proposed. By self-adjusting a pulse amplitude voltage according to process variations, the power consumption can be saved by 4.6%, compared to the conventional scheme without the self-adjustment. This power saving can also be helpful in improving the power efficiency of the proposed scheme. From the circuit simulation of NEM-relay charge pump circuit, the efficiency of the proposed scheme is improved better by 4.1% than the conventional.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.204-214
• /
• 2016

Shipbuilding process takes a long time for producing final products, and needs many different resources. Because of these characteristics, it has been studied about shipyard simulation and virtual manufacturing that is able to implement the virtual manufacturing process. However, among the previous researches, it requires considerable time and effort to construct simulation model since the systematic methodology has not been used for simulation modeling. Also, reusability of constructed simulation model was low. Therefore, this research defines the method to construct shipyard simulation system using the process-centric simulation modeling methodology and shipyard simulation framework. This paper also validates the utility of this methodology through applying to construct simulation model for the shipyard master plan validation.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.9-15
• /
• 2013

A new process for the synthesis of polyphenylcarbosilane (PPCS) via thermal rearrangement of polymethylphenylsilane (PMPS) in supercritical cyclohexane was proposed and investigated at reaction temperatures of $380-420^{\circ}C$, reaction times of 1-2 h, and a pressure of 15 MPa. The structure, molecular weight, and molecular weight distribution of the product were characterized by FT-IR, Si-NMR, and GPC. The ceramic yield was also measured by TGA analysis. High-quality PPCS with high molecular weight and ceramic yield can be synthesized via a supercritical process. Furthermore, this process, when compared to the conventional method, tends to moderate the reaction conditions such as reaction temperature and time. It is concluded that thermal rearrangement in supercritical fluid is an efficient and viable process in terms of the resulting yield, efficiency, and reaction time compared with those of the conventional PCS production process.

• 한국표면공학회지
• /
• 제52권1호
• /
• pp.6-15
• /
• 2019

Metal-halide perovskite (MHP) solar cell is a promising candidate for next-generation flexible devices and the BIPV (Building-integrated photovoltaics) because it can exhibit high power conversion efficiencies over 23%, good bendability and low processing cost. However, MHP solar cells are commonly fabricated by the spin coating that is not a reliable method to produce large-scale commercial solar cells. A shear coating can be one of the potential candidates for the large-scale deposition method of MHP films. In this work, the influences of the process parameters such as solvents of precursor solution, substrate temperature, concentrations of precursor solution, and annealing time on the thin film growth of MHP were investigated for the shear coating process. This study presents the possibility of the shear coating process for large-scaled perovskite film fabrication and reveals the role of process condition in the thin film growth of perovskites.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.413-422
• /
• 2022

TBM is widely used in the construction of various underground projects in the current world, and has the unique advantages that cannot be compared with traditional excavation methods. However, due to the high cost of TBM, the damage is even greater when geological disasters such as collapse occur during excavation. At present, there is still a shortage of research on various types of risk prediction of TBM tunnel, and accurate and reliable risk prediction model is an important theoretical basis for timely risk avoidance during construction. In this paper, a prediction model is proposed to evaluate the risk level of tunnel collapse by establishing a reasonable risk index system, using analytic hierarchy process to determine the index weight, and using the normal cloud model theory. At the same time, the traditional analytic hierarchy process is improved and optimized to ensure the objectivity of the weight values of the indicators in the prediction process, and the qualitative indicators are quantified so that they can directly participate in the process of risk prediction calculation. Through the practical engineering application, the feasibility and accuracy of the method are verified, and further optimization can be analyzed and discussed.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.289-294
• /
• 2013

Due to sudden transition to intellectual society corresponding with fast technology progress, companies and nations need to focus on development and guarantee of intellectual property. The possession of intellectual property has been the important factor of competition power. In this paper we developed the efficient patent search process with big data analysis tool R. This patent search process consists of 5 steps. We result that at first this process obtain the core patent search key words and search the target patents through search formula using the combination of above patent search key words.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.464-469
• /
• 2008

Information Delivery Manual (IDM) is a documentation format for capturing the information requirements among various AEC project tasks and their software uses. The authors analyzed the structural engineering and analysis domain and were able to define its process model definition and the information flow required for the process by following the methodology stated in the IDM format. The authors believe that The manual has its potentials for further enhancements for IFC-based process integration by transferring it into a information model schema, which can be later referenced by the software applications to automatically determine which data need to be exchanged.