• 한국유통학회지:유통연구
• /
• 제6권1호
• /
• pp.22-35
• /
• 2001

The focus of Business Process Re-engineering (BPR) has been extended to inter-business process that cuts across independent companies. Combined with Supply Chain Management (SCM), inter-business process reengineering (IBPR) focuses on synchronization of business activities among trading partners to achieve performance improvements in inventory management and cycle time. This paper reviews the business process reengineering movement from the historical perspective and presents a case of inter-business process reengineering using the latest internet-based Business-to- Business (B2B) technology based on Collaborative Planning, Forecasting, and Replenishment (CPFR). The case demonstrates how CPFR technology reengineers the distribution process between Heineken USA and its distributors. As world's first implementor of web-based collaborative planning system, Heineken USA reduces cycle time from determining the customer need to delivery of the need by 50% and increases sales revenue by 10％. B2B commerce on the internet is predicted to grow from $90 billion in 1999 to $2.0 trillion in 2003. This paper provides the management with the bench-marking case on inter-business process reengineering using B2B e-commerce technology.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4145-4149
• /
• 2012

A novel and simple method of luminescence enhancement effect for the determination of trace amounts of bile acid was proposed. The procedure was based on the luminescence intensity of the balofloxacin-europium(III) complex that could be strongly enhanced by bile acid in the presence of sodium dodecyl benzene sulfonate (SDBS). Under the optimum conditions, the enhanced luminescence intensity of the system exhibited a good linear relationship with the bile acid concentration in the range $5.0{\times}10^{-9}-7.0{\times}10^{-7}\;mol\;L^{-1}$ with a detection limit of $1.3{\times}10^{-9}\;mol\;L^{-1}$ ($3{\sigma}$). The relative standard deviation (RSD) was 1.7% (n = 11) for $5.0{\times}10^{-8}\;mol\;L^{-1}$ bile acid. The applicability of the method to the determination of bile acid was demonstrated by investigating the effect of potential interferences and by analyzing human serum and urine samples. The possible enhancement mechanism of luminescence intensity in balofloxacin-europium(III)-bile acid-SDBS system was also discussed briefly.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.

• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.42-48
• /
• 2017

OCD (Operational Concept Document) is very important in system development. To develop OCD we should answer questions about, what template to use, what is the overall process to develop OCD, what kinds of diagrams we should use and how can we validate the OCD. To answer about the template we compared tow industrial guide on operational concept development and tailored it. For development process, we proposed a comprehensive process which satisfies the requirements of the project context. For use of proper diagram, we analyzed many kinds of diagrams used in representing behavior of system and choose some diagrams which best fit for our purpose. Finally we established validation criteria for operational scenario and requirement texts in operational concept documents.

• 대한화학회지
• /
• 제61권3호
• /
• pp.89-96
• /
• 2017

This study proposed adsorption of Pb(II) ions from aqueous solution using activated carbon prepared from areca catechu shell (ACS AC) using Timphan Method. The effects of independent variables on adsorption kinetic and isotherm have been investigated by conducting experiments in batch mode at neutral pH. The structural characterization of adsorbent was done by FT-IR and SEM analysis. The Pb(II) adsorption was correlated very well with the pseudo second-order kinetic (PSOKM) and Langmuir isotherm models (LIM). Increasing NaOH mass for activation and adsorption temperature increased weakly all the parameters of adsorption kinetic and isotherm. The Pb(II) ions adsorption capacity of the ACS AC at 27 and $45^{\circ}C$ was 50.51 and 55.25 mg/g, respectively. Thermodynamic parameters were determined, and the results confirmed the Pb(II) ions adsorption should be endothermic and spontaneous process, and both physical and chemical adsorption should be taken place.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.533-537
• /
• 2009

This paper introduces a modified electro spinning system for biomedical wound-healing applications. The conventional electrospinning process requires a grounded electrode on which highly charged electro spun ultrafine fibers are deposited. Biomedical wound-healing membranes, however, require a very low charge and a low level of remnant solvent on the electrospun membrane, which the conventional process cannot provide. An electrohydrodynamic process complemented with field-controllable electrodes (an auxiliary electrode and guiding electrodes) and an air blowing system was used to produce a membrane, with a considerably reduced charge and low remnant solvent concentration compared to one fabricated using the conventional method. The membrane had a small average pore size (102 nm) and high porosity (85.1%) for prevention of bacterial contamination. In vivo tests on rats showed that these directly electro spun fibrous membranes produced using the modified electro spinning process supported the good healing of skin bums.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.17-24
• /
• 2009

The purpose of this research is to find the reasons of overcrowding in the emergency department of an hospital, then to shorten the total stay time of patients. The fact that main causes of the overcrowding exist in the process of the emergency department was discovered by analysis of the data. In order to improve these process, simulation model was developed by ARENA 7.0. Staff's service time, staff's organization, process ratio, and patient's waiting time were estimated in the simulation model in consideration of the decision of the patient's course of action. Several scenarios such as the simplification of the process, the setup of dedicated pathology lab, and mixed method were suggested and evaluated. Total stay time of the patients would be reduced up to 28.45%.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.127-134
• /
• 2000

The current three-stage cold farming process to produce a flange is investigated for the purpose of improvement of manufacturing process. The main goal of this study is to obtain an appropriate process sequence, which can produce the required part with less manufacturing cost. The current process sequence is simulated using finite element method and design criteria are examined. Based on the results of simulation of the current three-stage process. a design strategy for improving the process sequence is analyzed using the thick-walled pipes. Because it has a reduced process-sequence without buckling of the workpiece or overloading of tools, the new process has distinct advantages over the conventional process. Numerical results show that the newly proposed process with selected presses is the most economical way to produce the required part.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.435-446
• /
• 2000

Statistical process control(SPC) and engineering process control(EPC) are two strategies for quality improvement that have been developed independently. EPC seeks to minimize variability by adjusting compensatory variables in order to make the process level close to the target, while SPC seeks to reduce variability by monitoring and eliminating causes of variation. One purpose of this paper is to propose the IMA(0,1,1) model as the in-control process model. For the out-of-control process model we consider two cases; one is the case with a step shift in the level, and the other is the case with a change in the nonstationarity. Another purpose is to suggest the use of an integrated process control procedure with adjustment and monitoring, which can consider the proposed process model effectively. An integrated control procedure will improve the process control activity significantly for cases of the proposed model, when compared to the procedure of using either EPC or SPC, since EPC will keep the process close to the target and SPC will eliminate special causes.

• 산업공학
• /
• 제15권1호
• /
• pp.64-72
• /
• 2002

Broaching machine is widely used for machining inner shaped slots in the work-pieces, and provides vertical motion (usually hydraulically powered) between tool and work-piece. In this study, we modelled the tool life process and investigated economic tool life of broaching machine. Tool life process is divided into wear-process and succeeding failure process. Wear process is defined as machining wear and failure process as 'chipping' occurred by random shock. We modelled wear process as linear regression function for products amounts and assumed failure process as Poisson process. Economic tool life is defined as the number of lots which minimizes average tool related cost per lot and analyzed by using age replacement policy technique. As tool-related cost factors, we consider tool replacement cost, tool maintenance cost and quality costs of products. The results of this study can be applied to analyze life process of general machining tools.