• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.72-82
• /
• 2018

Generally speaking, because of complexity of engineering process, the systems engineering may be not easy to understand clearly and not easy to perform also. The status of systems engineering infrastructure of the some Korean industry is not matured yet, i.e., the systems engineering process, method, tool and environment is not implemented consistently within the steel making industry. These difficulties are more severe at the concept and basic design phase than the detail design phase relatively. Korean industry has lots of development project for the precedented systems and usually has matured domain knowledge for the precedented systems. Even though there is a mature domain knowledge of the precedented systems, the development project will lead to failure under the condition of engineering system is not well equipped. For the project success, it is very important to have a proper engineering execution system especially for the concept design and basic phase, which has a high abstraction and a large influence on the whole project. This paper proposes a minimized design process that can be easily applied to the concept and basic design phase of the precedented systems, instead of complex system engineering processes. This paper also proposes the application case of the minimized design process and methods for a Blast Furnace System.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.51-56
• /
• 2017

This paper presents a requirement development process using the model based systems engineering design process to the developments of the missile Seeker. SysML Model and requirement analysis templates were used as the specific execution method for applying the system engineering process. This paper will present a process for deriving the technical requirements and derived requirements using them.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.387-392
• /
• 2001

Kobe Steel, LTD. and Midrex Technologies Inc. jointly developed the FASTMET$\circledR$ process as a steel mill waste recycle technology in which the DRI product meets BF feed material or BOF/EAF feed material requirements. FASTMET(R) process turns value-less wastes into valuable DRI and sellable zinc oxide, and gives the solution for the steel mill wastes recycling from both economical and environmental viewpoints. During the development of the process, Laboratory, Pilot Plant and Demonstration Plant tests were carried out from 1990 to 1998. The first FASTMET(R) commercial plant began operation in April, 2000 and the second commercial plant started in April, 2001 Both commercial plants have proceeded successfully preying that FASTMET$\circledR$ is a suitable process for recycling steel mill waste and for producing DRI as an iron source.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.416-416
• /
• 2000

The Systems Engineering, as a methodology for engineering and management of today's ever-growing complex system, is a comprehensive and iterative problem-solving process. The process centers on the analysis and management of the stakeholders'needs throughout the entire Life-cycle of a system and searches for an optimized system architecture. There are many essential needs and requirements to be met when a system development task is carried out. Systems Engineering Management PLan(SEMP), as a specification for system development process, must be established to satisfy constraints and requirements of stakeholders successfully and to prevent cost overrun and schedule delay. The paper suggests a systematic SEMP development process and demonstrates a data model and schema for computer-aided systems engineering software, RDD-100, for use in the development and management of SEMP These are being applied to the systems engineering technology development task for the next-generation high-speed railway systems in progress.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.187-188
• /
• 2000

The conventional firing process method for the transparent dielectric layer in PDP Technology has disadvantages of low through put, high power consumption and large process area. We propose the rapid thermal scinterring (RTS) method as new process method to overcome these disadvantage characteristics. As the experimental result of this method, the optic transmittance(wavelength : 600nm) rate of transparent dielectric layer was more improved than conventional furnaces under the optimized gas supplying. Further, it was certified this method had the best conditions on the firing process of the PDP transparent dielectric layer.

• 한국태양에너지학회 논문집
• /
• 제38권3호
• /
• pp.37-45
• /
• 2018

The purpose of this study is to review all phases of the pilot project through the implementation of the Green Remodeling process. The Green Remodeling process was developed to facilitate anyone's ease of use. The Green Remodeling process consists of five phases : project, plan, design, construction, operation and maintenance. Each stage simulation was performed and the energy saving was predicted. Architects can easily obtain energy information of a building. In this study, we propose a green remodeling proposal plan through pilot project. Ultimately, the spread of green remodeling will greatly contribute to achieving the goal of reducing greenhouse gas emissions.

• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.63-69
• /
• 2009

For the effective and efficient system development, it is provided of complex and diverse disciplines, analysis and design, points of views for decisions making, technical information management, assurance of products, and so on to be integrated and ensured. Systems engineering is conducted through a process and is implemented by tools based on relevant methodologies. Systems engineering environment should be provided to support the systems engineering process, method, and tools used on the project. In this paper, the essential environment in performing works in a organization applying systems engineering on the basis of system life cycle was reviewed. The present states on establishment of the systems engineering in Korea Railroad Research Institute were also examined with some reviews of other cases.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.101-108
• /
• 2004

A construction process consists of value adding activities and non-value adding activities, necessary or unnecessary. If construction personnel can eliminate inefficient and/or unnecessary activities within the process, they may have a great opportunity to improve their construction process. The Product Process Analysis (PPA) technique, which was developed in the manufacturing industry, can be applied for identifying wastes in the construction process and ultimately improving the process itself. It provides useful tools, such as a process chart worksheet and flow diagram, for mapping the flow of construction activities with predetermined standardized symbols. These tools make people understand the flow of activities more easily, identify value adding/non-value adding activities within the process, and areas where the process can be improved. The example applications of PPA are demonstrated in the paper through the case studies implemented on the construction process of structural steel. The results of case studies indicate that PPA technique was effective at identifying and removing wastes in the steel construction process. It is also found that PPA technique is more effective for improving highly repetitive construction processes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권2호
• /
• pp.61-66
• /
• 1998

Glycolipids produced by Pseudomonas aeruginosa YPJ-80 were characterized by chromatographic and spectorscopic techniques as a mixture of two rhamnolipids. For recovery of glycolipids from the culture broth, various isolation methods including ultrafiltration, adsorption and solvent extraction were compared. Ultrafiltration showed the best results in terms of glycolipids recovery. Further purification for spectroscopic analysis was carried out by adsorption chromatography and preparative thin layer chromatography. From the spectroscopic analysis, such as IR spectroscopy. FAB-MS, 1H-NMR and 13C-NMR and hydrolysis analysis, the glycolipids were identified as L-${\alpha}$-rhamnopyranosyl-${\beta}$-hydroxydecanoly-${\beta}$-hydroxydecanoate and 2-O-${\alpha}$-L-rhamnopyranosyl-${\alpha}$-L-rhamnopyranosyl-${\beta}$-hydroxydecanoyl-${\beta}$-hydroxydecanoate. Monorhamnolipid and dirhamnolipid lowered the surface tension of water to 28.1 mN/M and 29.3 mN/m, respectively.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권5호
• /
• pp.379-381
• /
• 2000

Anaerobiospirillum succiniciproducens requires expensive complex nitrogen sources such as yeast extract and polypeptone for its growth and succinic acid production. It was found that A. succiniciproducens was able to grow in a minimal medium containing glucose when supplemented with corn steep liquor (CSL) as the sole complex nitrogen source. The concentration of CSL had a significant effect on the glucose consumption by A. succiniciproducent. When 10-15 g/L of CSL was supplemented, cells were grown to an OD(sub)600 of 3.5 and produced 17.8 g/L succinic acid with 20 g/L glucose. These results are similar to those obtained by supplementing yeast extract and polypeptone, thereby suggesting that succinic acid can be produced more economically using glucose and CSL.