• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.49-57
• /
• 2013

The dimensioning accidental loads have been selected through suitable quantitative risk assessment and generally utilized important factors for offshore facility design. The fire hazard can be quantified with dimensioning fire loads. The main purposes of fire protection are to maintain the functionality of safety systems within evacuation period and to prevent the escalation from initial fire to uncontrolled catastrophic fire. This paper introduces the applications and the design methods of active and passive fire protections as representative measures of fire protection of offshore facilities. The passive fire protection requires the high initial installation cost and much difficulty on the operation of facilities and their maintenance. The oil major clients have asked the design contractors of offshore facilities to optimize the amount of passive fire protection with relevant engineering technology recently.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.65-84
• /
• 1993

This study reviewed the current status and problems of sewerage system in Korea and then proposed possible methods to correct the problems. Also, evaluation of future development in sewerage system is included. It can be summarized as follows : 1. Investment in sewerage system is relatively low . 0.23% of GNP, Considering that the investment portion is 0.35% in OECD and 0.63% in Japan, it should be increased further. 2. The reasons wily the investment in sewerage system is low can be ' (1) Low priority is given to the investment in sewerage system. Local government builds and operates its own wastewater treatment plant. Local government as well as residents prefer to invest their money in roadwork, housing and parks to in wastewater treatment facilities because of greater investment effects. (2) Besides capital investment, more maintenance cost is needed for sewerage system. Proper operation of wastewater treatment facilities requires a well-trained operator. Because of public conception that operation of wastewater treatment facility is a dirty job, it is difficult to find a well-trained operator. (3) It is difficult to estimate the effect of sewerage system (4) Cost required to build and maintain wastewater treatment facility should be paid by people, who benefit from the facility. People to benefit are sometimes different from people to pay. 3. Advanced treatment is necessary to protect the bay aura and raw water source as well as to prevent eutrophication of lakes and ponds. 4. Wastewater treatment facility were mainly build in big cities during the decade of 1980. Followings should be solved first to expand the facilities. (1) Rapid repair and construction of sewer. (2) Technical development of wastewater treatment . Prevention of efficient and economical wastewater . Development of efficient and economical wastewater treatment techniques . Development of high-efficiency treatment using bioreactor . Reuse of wastewater treatment plant effluent (3) Sludge treatment and disposal . Composting of sludge cakes . Development of techniques to reduce the volume of sludge cake : incineration and reuse of sludge ash and slag. (4) Utilization of wastewater treatment facilities . Construction of community parks or sports families(ie, on the tops of the covered aeration tanks and sedimention tanks) Construction of wastewater treatment facilities under ground and of parking facilities and community parks above ground. (5) Education of wastewater treatment personal.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.289-296
• /
• 2002

The web, which is most actively used in the internet environment, is changing educational system. Students usually prefer the interactive and multimedia learning aids based on web applications and web media to static web pages. The former is known to enhance the effectiveness of learning. This paper proposes a study system which involves effective adaptation to the various changing factors of learners' progress and the corresponding automated evaluation system. Conventional evaluation utilizes normalized method, where the learning objectives generally set by the instructors or educational operators/administrators are usually pursued rather than the interest of the individual learners, which is not ideal for the computer-based learning. Web-based project-oriented learning system provokes the mutual participations among the users, operators, and administrators in understanding the jobs to be performed and the effort to enhance the progressive developments of knowledge and application capabilities. In this Paper, an automated evaluation system is implemented, where the instructors and web-operators/administrators work as hosts for education. The learners take advantage of user-oriented comparative learning and pattern design. The design and implementation of the project-oriented evaluation methods performed in the internet/intranet environments are discussed.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.301-310
• /
• 2002

Internet has been applied to the educational field such as data search, lecture by motion picture, realtime examination. Most questions made for these remote examinations use methods of making questions randomly using fixed questions or item pools. The designed system in this paper makes questions without knowing MARK-UP language and after undergoing examinations on Web. Also it readjusts degree of difficulty automatically on the basis of the rate of correct answers. In addition, this enables learners to perform feedback learning after examinations and subsequently learners themselves to adjust their degree of difficulty and undergo reexaminations. The automatic selection system makes it easy to select questions, possible to expect average marks and number of questions made, and to prevent that questions may be made too easy or too hard. For a remote examination, as there are much possibilities of dishonesty such as examination by proxy so different types of problems are made, and problems of the rationality caused from that can be avoided.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.1
• /
• pp.13-20
• /
• 2002

Recently, there is a great demand for artificial teeth prostheses made of the materials which are sintered at $1500^{\circ}C$ such as zirconia ceramic. Since degree of strength of the materials is very high, however, it is very difficult for technicians to manually fabricate the prostheses for these ceramics. So the prostheses have been fabricated by using CNC(computer numerical control) machines. In doing them by using CNC, it is very important that the prostheses satisfying dentists's requirements are accurately modeled into 3D objects. In this paper, we propose an effective method for modeling single cores such as single caps and Conus cores, which are the main those of artificial teeth prostheses. And we also present the visual examples of 3D models for these single cores modeled by the proposed methods. In special, the method has used Minkowski sum and ZMap for modeling the single cores.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.465-471
• /
• 2018

Recently, biometric technology has begun to be used as a fusion of IT technology and financial system. Using this biometric technology, FIDO(Fast Identity Online) technology, Samsung and Apple started Samsung Pay and Apple Pay service. FIDO authentication technology replaces existing authentication methods such as passwords. Among the biometric technologies, fingerprint recognition technology is attracting attention because it can minimize the device and user rejection at a relatively low price. However, fingerprint information has a limited number of users and it can not be reused if fingerprint information is leaked by an external attacker. Therefore, in this paper, we propose a method to authenticate a user using EEG signal which is one of biometrics technologies. W propose a method to use EEG signal measurement value in FIDO system by using convenience channel by using short channel EEG device. And propose a method to utilize EEG signal when the user recognizes a specific entity by measuring the EEG signal before and after recognizing a specific entity.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.7-15
• /
• 2019

With the increase of employment pressure in China and the need of economic transformation, chinese government started to encourage college students to innovate and start their businesses to relieve the employment pressure. Due to the lack of entrepreneurship ability, the success rate of college students' entrepreneurship is not high. Therefore, based on the grounded theory and qualitative research methods, this paper focuses on the entrepreneurial ability of college students, selects college students who have started their own businesses in jilin university of China as interview objects, and summarizes the original data obtained in the in-depth interview for analyzing the connotation of college students' entrepreneurial ability, and puts forward the concept model of Chinese college students' entrepreneurial ability. The results show that the entrepreneurial ability of college students consists of driving force, management ability, entrepreneurial endowment, and potential ability. This study has certain guiding significance for universities to carry out entrepreneurship education.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7611-7615
• /
• 2014

Aims: To prepare 5-fluorouracil (5-Fu) nanoparticles with higher encapsulation efficiency and drug loading, and then investigate interaction with the SGC-7901 gastric cancer cell line. Materials and Methods: Prescription was optimized by orthogonal experiments, the encapsulation efficiency and loading capacity were tested by high-performance liquid chromatography, and inhibition of proliferation by 5-Fu nanoparticles and 5-Fu given to cells for 24, 48 and 72 hours was investigated by methyl thiazolyl tetrazolium assay (MTT). In addition, 5-Fu nanoparticles were labeled by fluorescein isothiocyanate (FITC), and absorption into cells was tested by flow cytometry. Results: The optimal conditions for preparation were concentrations of 5-Fu of 5mg/ml, of $CaCl_2$ of 60 mg/ml and of chitosan of 2 mg/ml. With a stirring speed of 1200rpm, encapsulation efficiency of 5-Fu nanoparticles was $55.4{\pm}1.10%$ and loading capacity was $4.22{\pm}0.14%$; gastric cancer cells were significantly inhibited by 5-Fu nanoparticles in a time and concentration dependent manner, and compared to 5-Fu with slower drug release, in a certain concentration range, inhibition with 5-Fu nanoparticles was stronger. 5-Fu nanoparticles were absorbed by the cells in line with the concentration. Conclusions: 5-Fu nanoparticles can inhibit growth of gastric cancer cells in vitro to a greater extent than with 5-Fu with good adsorption characteristics, supporting feasibility as a carrier.

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.448-458
• /
• 2012

In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of metallic glasses $Ni_{92{\cdot}3}Si_{4.5}B_{32}$, $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ (at %) at different concentrations of $H_2SO_4$ solutions was examined by electrochemical methods and Scanning Electron Microscope (SEM) and X-ray Photoelectron Microscopy (XPS) analyses. The corrosion kinetics and passivation behavior was studied. A direct proportion was observed between the corrosion rate and acid concentration in the case of $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloys. Critical concentration was observed in the case of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ alloy. The influence of the alloying element is reflected in the increasing resistance of the protective film. XPS analysis confirms that the protection film on the $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ alloy was NiS which is less protective than that formed on Cr containing alloys. The corrosion rate of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$. alloys containing 7% and 13% Cr are $7.90-26.1{\times}10^{-3}$ mm/y which is lower about 43-54 times of the alloy $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ (free of Cr). The high resistance of $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloy at the very aggressive media may due to thicker passive film of $Cr_2O_3$ which hydrated to hydrated chromium oxyhydroxide.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.316-321
• /
• 2020

PURPOSE. The stress distribution and microgap formation on an implant abutment structure was evaluated to determine the relationship between the direction of the load and the stress value. MATERIALS AND METHODS. Two types of three-dimensional models for the mandibular first molar were designed: bone-level implant and tissue-level implant. Each group consisted of an implant, surrounding bone, abutment, screw, and crown. Static finite element analysis was simulated through 200 N of occlusal load and preload at five different load directions: 0, 15, 30, 45, and 60°. The von Mises stress of the abutment and implant was evaluated. Microgap formation on the implant-abutment interface was also analyzed. RESULTS. The stress values in the implant were as follows: 525, 322, 561, 778, and 1150 MPa in a bone level implant, and 254, 182, 259, 364, and 436 MPa in a tissue level implant at a load direction of 0, 15, 30, 45, and 60°, respectively. For microgap formation between the implant and abutment interface, three to seven-micron gaps were observed in the bone level implant under a load at 45 and 60°. In contrast, a three-micron gap was observed in the tissue level implant under a load at only 60°. CONCLUSION. The mean stress of bone-level implant showed 2.2 times higher than that of tissue-level implant. When considering the loading point of occlusal surface and the direction of load, higher stress was noted when the vector was from the center of rotation in the implant prostheses.