• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.12-21
• /
• 2006

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.249-255
• /
• 2018

Many studies in risk management have been focused on management process, contract relation, and risk analysis in the past decade, but very few studies have addressed project risks from the perspective of risk efficiency. This study started with using Fault Tree Analysis to develop a framework for the decision-making support system of risk management from the perspective of risk efficiency, in order for the support system to find risk strategies of optimal combination for the project manager by the trade-off between project risk and cost of project strategies. Comprehensive and realistic risk strategies must strive for optimal decisions that minimize project risks and risk strategies cost while addressing important data such as risk causes, risk probability, risk impact and risk strategies cost. The risk management in the construction phase of building projects in Taiwan upon important data has been analyzed, that provided the data for support system to include 247 risk causes. Then, 17 risk causes were extracted to demonstrates the decision-making support system of risk management from the perspective of risk efficiency in building project of Taiwan which could reach better combination type of risk strategies for the project manager by the trade-off between risk cost and project risk.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.627-635
• /
• 2020

In this study, the optimal support span determination of pipeline system was carried out in consideration of the effects of seismic loads. The theoretical support and structural analysis were used to determine the optimal support span of piping system according to pipe diameter using theoretical and structural deflection criteria. The reliability of the analysis results was secured by comparing the structural and theoretical results. In particular, the optimum support span of piping system was obtained by considering the effects of seismic load, and the optimal support span of pipe diameter and piping system tended to be proportional to each other. When considering the effects of earthquakes on different pipe diameters(300~2,500mm), the span length is reduced by up to 48% at the allowable stress criterion, and the pipe span length is reduced by up to 5.9% at the deflection criterion. It can be seen that the effect of the seismic load on the determination of the piping span length has a greater effect on the stress than the displacement.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.64-67
• /
• 2004

Change detection using aerial and satellite images is one of the important research topics in photogrammetry and image interpretation. It is of particular importance especially in the fields of military, political and administrative affairs. When there is a need to detect changes in multi-temporal images, the most efficient methods for change detection and thresholds of change/no change area need to be chosen. Also, the images obtained from the various methods need to be analyzed. To do so, we need a system that can support our decision making process. Therefore, in this paper, we propose the Decision Support System for Change Detection. This system is composed of Data Base, Model Base and Graphic User Interface(GUI). Data base is a compilation of previous change detection results, and Model Base comprise of numerous operations. The data can be input and have the results of change detection analyzed by using GUI. In this paper, we will explain the entire operation of the system and demonstrate the level of its effectiveness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.457-459
• /
• 2016

This lecture support system can be used to smoothly transfer the sound in the auditorium or the particular outdoor space. Commercial lecture support system is useful but very expensive. Therefore in this paper we have designed and developed lecture support system using a mobile phone. We can exactly hear the lecture in difficult situation using this system. The system provides the ability to save a lecture in the storage, so we can hear the lecture repeatedly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1666-1672
• /
• 2008

In this study, it collected and analyzed a construction case of the improved top-down support system application field on a case by case retaining wall method. The behavior of horizontal displacement was analyzed according to retaining wall type after reviewing a design stage and estimated horizontal displacement under the construction. The study results showed that it is judged stable until excavation termination irrelevant to a retaining wall method at the improved top-down support system application. It is judged that the settlement of behind ground can minimize because the retaining wall head displacement also behave stably. It was compared the predicted horizontal displacement in design and the measured horizontal displacement acquired through a measurement by using Elasto-Plastic analysis program. The comparison results showed that a similar horizontal displacement was predicted within stability standard irrelevant to a retaining wall method. So, it is decided that the advanced prediction is reasonable by Elasto-Plastic analysis in design applied the improved top-down support system. In the case of the ground anchor method application under a same condition, it is decided that a horizontal displacement will more increase than the improved top-down support system is applied. If a section condition is same, it was decided that to apply top-down support system is more stable than that.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.62-67
• /
• 2007

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1144-1149
• /
• 2005

This paper presents how to establish the decision support model for the cooperative design in order to improve design coordination and optimize the building system. With this view, the paper presents the method that analyzes decision making participants of each building system on drawings. It also presents the combination evaluation method from the viewpoint of performance, cost and constructability to improve the decision making process in cooperative design.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.429-439
• /
• 2008

With a remote operated manipulator system, the situation at a remote site can be rendered through remote visualized image to the operator. Then the operator can quickly realize situations and control the slave manipulator by operating a master input device based on the information of the virtual image. In this study, the remote operator visual support system (ROVSS) was developed for viewing support of a remote operator to perform the remote task effectively. A visual support model based on virtual environment was also inserted and used to fulfill the need of this study. The framework for the system was created by Windows API based on PC and the library of 3D graphic simulation tool such as ENVISION. To realize this system, an operation test environment for a limited operating site was constructed by using experimental robot operation. A 3D virtual environment was designed to provide accurate information about the rotation of robot manipulator, the location and distance of operation tool through the real time synchronization. In order to show the efficiency of the visual support, we conducted the experiments by four methods such as the direct view, the camera view, the virtual view and camera view plus virtual view. The experimental results show that the method of camera view plus virtual view has about 30% more efficiency than the method of camera view.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.798-801
• /
• 1993

This paper presents the decision support system using fuzzy knowledge to adapt the cutting conditions chosen by a conventional expert system to a particular machine tool, workpiece and clamping system. These preliminary results demonstrate the capability of fuzzy logic to adjust cutting parameters taking into account parameters difficult to quantify.