• 한국환경과학회지
• /
• 제16권6호
• /
• pp.763-769
• /
• 2007

This study compared the performance of a bioscrubber, a biofilter, and a combined system of bioscrubber and biofilter employed being operated at the laboratory-scale. for the removal of hydrogen sulfide. The bioscrubber maintained 100% removal of hydrogen sulfide up to inlet load of $56\;g-S/m^3{\cdot}hr$, while the removal efficiency was decreased with the increase of inlet load. The biofilter showed 100% removal efficiency up to inlet load of $126\;g-S/m^3{\cdot}h$ and the maximum elimination capacity of $126\;g\;S/m^3{\cdot}h$ for the inlet load of $224\;g-S/m^3{\cdot}h$. On the other hand, the combined system of bioscrubber and biofilter showed 100% removal for an inlet hydrogen sulfide load of up to $85\;g-S/m^3{\cdot}h$ and the maximum elimination capacity of $153\;g-S/m^3{\cdot}h$ for inlet loads of $224\;g-S/m^3{\cdot}h$.

• 대한의용생체공학회:의공학회지
• /
• 제34권3호
• /
• pp.105-110
• /
• 2013

Respiratory signal is one of the important physiological information indicating the status and function of the body. Recent studies have provided the possibility of being able to estimate the respiratory signal by using a change of PWV(pulse width variability), PRV(pulse rate variability) and PAV(pulse amplitude variability) in the PPG (photoplethysmography) signal during daily life. But, it is not clear whether the respiratory monitoring is possible even during sleep. Therefore, in this paper, we estimated the respiration from PWV, PRV and PAV of PPG signals during sleep. In addition, respiration rates of the estimated respiration signal were calculated through a time-frequency analysis, and errors between respiration rates calculated from each parameter and from reference signal were evaluated in terms of 1 sec, 10 sec and 1 min. As a result, it showed the errors in PWV(1s: $36.38{\pm}37.69$ mHz, 10s: $36.53{\pm}38.16$ mHz, 60s: $30.35{\pm}38.72$ mHz), in PRV(1s: $1.45{\pm}1.38$ mHz, 10s: $1.44{\pm}1.37$ mHz, 60s: $0.45{\pm}0.56$ mHz), and in PAV(1s: $1.05{\pm}0.81$ mHz, 10s: $1.05{\pm}0.79$ mHz, 60s: $0.56{\pm}0.93$ mHz). The errors in PRV and PAV are lower than that of PWV. Finally, we concluded that PRV and PAV are more effective than PWV in monitoring the respiration in daily life as well as during sleep.

• 한국구조물진단유지관리공학회지
• /
• 제20권2호
• /
• pp.39-45
• /
• 2016

• 지질공학
• /
• 제33권4호
• /
• pp.599-609
• /
• 2023

국내 항만 방파제의 내진보강시 현장여건, 현장상황 등으로 회수율이 불확실한 경우가 많아 문제점이 지속적으로 발생하고 있다. 따라서, 본 연구에서는 저유동성 몰탈주입 공법 적용 후 그라우팅 확인방법으로 시추조사를 통한 회수율 및 개량체의 압축강도를 분석하였으며, 추가적으로 다운홀 테스트 및 토모그래피로 탄성계수를 확인하여 지반개량 후 연약지반의 보강 증대 효과를 확인하고자 하였다. 실험결과, 다운홀테스트의 경우 BH-1번과 3번공에서 심도 28.0 m까지에 대한 지반의 평균 전단파속도는 229 m/s에서 288 m/s로 증가하였고, 심도 30.0 m까지에 대한 지반의 평균 전단파속도는 224 m/s에서 282 m/s로 증가하는 경향을 보였다. 이는 보강후 지반의 강성이 증대되어 나타난 결과로 판단된다. 토모그래피 탐사 결과, Site1번의 시료의 연약지반의 Vs가 113 m/s에서 214 m/s, Site2번 시료의 Vs는 120 m/s에서 224 m/s로 증가하였다. 이는 전단파속도에 따른 암질의 분류에서 Vs값이 180~360 m/s를 만족하는 값으로 내진보강 후의 지반의 강성이 단단한 흙으로 보강됨을 확인할 수 있다.

• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.11-16
• /
• 2009

This study introduces the verification, validation & accreditation (VV&A) process for modeling & simulation (M&S). VV&A is standard process for credibility of M&S. In several countries including USA, for weapon system of Defense Development using M&S, VV&A is necessary procedures to acquire official approving for credibility of M&S. Many countries have regular recommend practice guide (RPG) and instructive for VV&A of M&S. In this study, we focus the VV&A key concepts as Department of Defense RPG of USA and give the outline of the main VV&A concepts because we don't have any available VV&A Instructive. Also, this report documents the first significant VV&A application for a MITS(M-SAM Integrate Test System) including Verification and Validation(V&V) activity and tasks.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.272-280
• /
• 2021

We research and develop a SW-based virtual testing product that can be commonly used in the design/development of non-communication EW systems before the production of physical test products. Through this study, we have developed M&S technology to improve the accuracy of EW weapon system analysis/design and to verify and predict the performance of EW equipment, and to develop proven engineering module models and model base systems. It proposes a technology to build an EW M&S framework that can flexibly link/integrate various engineering/engage-level EW heterogeneous M&S systems.

• 농업과학연구
• /
• 제37권2호
• /
• pp.285-293
• /
• 2010

To secure instream flow at the Yudeung urban stream reach of Daejeon city in South Korea, Yudeung upstream diversion was designed with total water storage of $59{\times}10^4m^3$, and the upstream Seongol reservoir was planned to raise the bank with various sizes. Downstream streamflows were simulated by considering outflows from upstream diversion and reservoir, and after then flow durations were analyzed and compared with flows of no reservoir condition. In case of no diversion or reservoir upstream, flow durations were $1^{st}$ flow of $84.72m^3/s$, $95^{th}$ flow of $2.10m^3/s$, $185^{th}$ flow of $0.92m^3/s$, $275^{th}$ flow of $0.42m^3/s$, and $355^{th}$ flow of $0.31m^3/s$. In case of upstream diversion, flow durations were $1^{st}$ flow of $94.38m^3/s$, $95^{th}$ flow of $2.96m^3/s$, $185^{th}$ flow of $1.22m^3/s$, $275^{th}$ flow of $0.50m^3/s$, and $355^{th}$ flow of $0.35m^3/s$. The increase flow rates were $0.04m^3/s$ in $355^{th}$ flow, $0.08m^3/s$ in $275^{th}$, and $0.30m^3/s$ in 185th. In case of Seongol reservoir with effective storage capacities of $365{\times}10^4m^3$, $544{\times}10^4m^3$, $750{\times}10^4m^3$, and $992{\times}10^4m^3$, flow durations were $85.5{\sim}83.9m^3/s$ on $1^{st}$ flow, $2.85{\sim}2.57m^3/s$ on $95^{th}$ flow, $1.16{\sim}1.27m^3/s$ on $185^{th}$ flow, $0.64{\sim}0.99m^3/s$ on $275^{th}$ flow, and $0.56{\sim}0.94m^3/s$ on $355^{th}$ flow. The increase flow rates were $0.25{\sim}0.63m^3/s$ in $355^{th}$ flow, $0.22{\sim}0.57m^3/s$ in $275^{th}$, and $0.24{\sim}0.35m^3/s$ in $185^{th}$. The more the sizes of upstream reservoirs increased, the $1^{st}$ and $95^{th}$ flows decreased in which coefficients of determination were 0.92, 0.99, respectively and the $185^{th}$, $275^{th}$, and $355^{th}$ flows increased in which coefficients of determination were 0.93 to 0.99.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.14-17
• /
• 1995

Various methods and techniques have been proposed for solving optimization problems; the methods have been applied to various practical problems. However the methods have demerits. The demerits which should be covered are, for example, falling into local minima, or, a slow convergence speed to optimal points. In this paper, Likelihood Search Method (L.S.M.) is proposed for searching for a global optimum systematically and effectively in a single framework, which is not a combination of different methods. The L.S.M. is a sort of a random search method (R.S.M.) and thus can get out of local minima. However exploitation of gradient information makes the L.S.M. superior in convergence speed to the commonly used R.S.M..

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.110-116
• /
• 2016

본 논문에서는 디지털 임피던스 보정 회로와 이퀄라이저 회로를 가진 1.2V 5Gb/s SLVS 차동 송신단을 제안한다. 제안하는 송신단은 4-위상 출력 클록을 갖는 위상 고정 루프, 4-to-1 직렬변환기, 레귤레이터, 출력 드라이버, 그리고 신호보존성을 향상하기 위한 이퀄라이저 회로를 포함한다. 또한, built-in self-test를 위해 pseudo random bit sequence 발생기를 함께 구현한다. 제안하는 SLVS 송신단은 80mV에서 500mV의 차동 출력 전압범위를 지원한다. SLVS 송신단은 1.2V의 공급전압을 가지는 65nm CMOS공정을 이용하여 구현한다. 측정된 5Gb/s SLVS 송신단의 peak-to-peak 시간 지터는 46.67ps이며, 전력소모는 1.88mW/Gb/s이다.