• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.911-918
• /
• 2014

Over the past few years, security breaches have been consistently reported around the world. Especially, people's personal information are at risk of being breached as the firms gather and utilize the information for their marketing purposes. As an effort to revamp their data infrastructures, companies have rebuilt their system that almost every data, including the personal information, are stored within the digital database. However, this migration provides easier access to the database but it has also increased the system vulnerability. As the data can be easily exposed to the unauthorized personnel both intentionally and unintentionally, it is necessary for companies to establish a set of security protocol and operate the personal information protection system. There are two major certified security system in South Korea; PIMS from KISA and PIPL from NIA. This paper analyzes the preferences of SMEs and small business using conjoint attributes of PIMS and PIPL. The study shows that the business owners take post certification rewards as the most important factor. It also shows that the attributes that have the highest utility rates are the following; 1) KISA certification, 2) 79 points of protection counter measurements, 3) 28 items of life cycle, 3) 50 percent discount on certification fee, and 4) Reduced amount of fine for personal information leakage incident.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.4
• /
• pp.10-16
• /
• 2013

Korean housing developers are in a very competitive market and their way of attracting buyers is landscaping better than competing firms do. Thus, transplanting larger pine trees(Pinus densiflora S. et. Z.) is in vogue. A typical case is a pine tree about 30-year old, 35 diameters at breast height, transplanted 223 km afar from the Gangwon Province to Seoul. We estimated and compared carbon emissions during the whole transplanting works, and carbon intake by the tree if it survives 50 more years on site. Findings are; first, a large tree will take up and sequestrate approximately 90 kgC if it survives 50 more years. Second, transplanting works emit approximately 113.69 kgC, which is about 1.26 times of its possible future intake of carbon. Landscaping is a legal requirement for the purposes not only of aesthetics but also of environmental quality. Transplanting larger trees that came from a dam or a road building site may be inevitable and acceptable. However, transplanting larger trees long distance was evaluated to be harmful to the environment. It is strongly recommended to prohibit transplanting large trees. Landscape professionals need to guide clients to have desirable consumer attitude.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.49-72
• /
• 2018

Before the financial crisis of 1997 in Korea, many industrial sectors across the country have achieved remarkable economic growth since the 1970s because of the development of large-scale equipment industries such as civil engineering, steel, construction and chemical industries. However, after the financial crisis, the economic growth rate has slowed down. Also, the global recession and the rise of China in the global business environment have led to a long-term recession in the national industry as a whole. In current economic environment, it is not easy for the companies even having excellent resources to continue its competitive advantage. Moreover, the chemical industry, which has an influence as a basic industry of other industries, misses the point of transformation into a high value-added industry, as shown in previous research. In order to meet the rapidly changing global business environment, Korean chemical companies should have a dynamic capabilities which to rapidly reallocate and consolidate the resources and capabilities they possess. The dynamic capabilities to convert, rearrange and develop the resources possessed by the company in the direction of creating high added value and to promptly search for, absorb, transform and fuse newly required capabilities and resources should be continuously applied to Korean chemical companies. It is the core competence to secure competitive advantage. In order to secure the dynamic capabilities of the company, the dynamic capabilities of individual employees should be strengthened and employees should be able to demonstrate their own leadership so that they can proactively work and self-manage in a positive direction. Previous studies have focused mainly on the dynamic capabilities of firms. However, the competence of the human resources that make up the enterprise leads to the capabilities of the enterprise, and the human resources themselves are also important corporate resources. This paper focuses on the dynamic capabilities of individuals and strives to clarify the causal relationship between dynamic capabilities, self-leadership, and organizational effectiveness which have direct or indirect effects on management outcome. The reasons for choosing the chemical industry are based on the fact that a domestic chemical companies are in a long-term recession, and they lacks a innovation and value creation capabilities. Also, chemical industry has a large impact on the national economy.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.843-862
• /
• 2018

Purpose: The purpose of this study was to develop quality innovation techniques specialized for the small and medium-sized businesses. which account for the majority of Korean companies, were having a hard time utilizing the widely recognized quality innovation techniques due to resource constraints. Methods: First, we do review the existing Single PPM and 6 Sigma. And investigate the utilization of these methods including Toyota Production System. Second, we devised a four-step problem-solving methodology based on recent trends in quality innovation such as Simple, Speedy, and Smart. Third, we do survey on frequently used tools for quality innovation. Many opinion leaders including quality consultants and professors answered and gave us valuable comments about our selected quality tools. Finally, we do specify and map tools to each step of PASS. Results: In 2017, 167 companies participated in the quality innovation support business for small businesses according to the Korea Chamber of Commerce & Industry. We conducted performance checks on 167 companies that had completed the "PASS" projects. For the purpose of evaluating improvement performance, the survey was carried out using a structured questionnaire during the field visit of these companies mentioned above. For the reference, 165 out of 167 companies (98.8 % response rate) responded to the questionnaire and conducted performance analysis based on it. According to the survey, 97.6 percent of the respondents were very satisfied with their overall satisfaction with the quality innovation support projects for small and medium sized enterprises in 2017. Also, 93.3 % of the respondents were satisfied with the results of level of the target achievement. As a result, 160 companies (97.0 % of the participating companies) hope to partic ipate in the quality improvement project using "PASS" once again. Conclusion: In this paper, we introduce the new quality innovation methodology, which is named as 'PASS', It could support the long-range business plan of the small and medium-sized businesses to achieve total customer satisfaction resulting in increased market share and improved profit margin. The most small companies can use this "PASS" technique more easily, quickly and most efficiently than their existing known quality innovation techniques such as Six Sigma and Single PPM, etc.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.145-152
• /
• 2021

In this study, we have examined the effect of open innovation of SMEs on innovation performance of firms. Most studies do not consider internal generation in relation to open innovation and innovation performance.We conducted empirical studies to overcome this problem. The research was carried out by collecting data collected from 512 SMEs and the 3SLS method was used to minimize the internal generation. As a result, open innovation investment and use of external ideas among SMEs' open innovation have positively influenced project success and technical performance. But, the introduction of technology and cooperation with the research organization did not affect the innovation performance, which is presumed to be due to the fact that the open innovation of SMEs is limited to relatively inexpensive activities. Therefore, in order to promote open innovation of SMEs, it is necessary to provide support for relatively high-cost activities and to improve the innovation performance of enterprises. In order to reduce the difficulties of open innovation activities, domestic universities and research institutes should support the construction of enterprise networks and actively support the utilization of technology to expand innovation performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.613-622
• /
• 2020

The South Korean government plans for a 37 % reduction in CO2 emissions against business as usual by 2030. Subsequently, the Ministry of Land, Infrastructure and Transport declared a 26.9 % reduction target in greenhouse gas emissions from buildings by 2020 and established the Green Standard for Energy and Environmental Design (G-SEED) to help improve the environmental performance of buildings. Construction companies often work with consulting firms to prepare for G-SEED certification. In the process, owing to inefficient data sharing and work connections, it is difficult to achieve economic efficiency and obtain certification. The objective of this study was to develop an economic model to assist contractors in achieving the required G-SEED scores for materials and resources. To do this, we automated the process for material comparison and selection on the basis of an analysis of actual consulting data, and developed a model that selects material alternatives that can meet the required scores at a minimum cost. Information on materials is input by applying a genetic algorithm to the optimization of alternatives. When the model was applied to actual data, the construction cost could be lowered by 79.3 % compared with existing methods. The economical material selection model is expected to not only reduce construction costs for owners desiring G-SEED certification but also shorten the project design time.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.785-796
• /
• 2023

The adoption of Environmental, Social, and Governance(ESG) practices in domestic construction firms is predominantly driven by major corporations. These companies not only publish reports on their ESG management but also engage in a meticulous process of identifying key issues and setting priorities. This process entails an in-depth evaluation of the severity of various issues and the gathering of insights from experts in the field. Interestingly, a comparative analysis of ESG assessments for construction companies, both domestically and internationally, reveals significant discrepancies in outcomes. These differences stem from the varied evaluation methodologies and criteria employed by different assessing bodies. Addressing this gap, our study proposes a suite of strategies aimed at bolstering ESG management within the construction sector. We advocate for enhanced policy support and financial backing, especially targeting small and medium-sized enterprises(SMEs) to facilitate their engagement in ESG practices. A critical step forward involves the standardization and transparent disclosure of ESG evaluation criteria, tailored to reflect the unique aspects of the construction industry. Moreover, the standardization and publication of ESG assessments for subcontractors are essential, equipping them with the necessary tools for effective ESG management and evaluation. Given the global nature of construction projects, particularly those commissioned by the European Union in regions like Africa and East Asia, adherence to ESG standards is imperative. Our long-term vision includes the development of a comprehensive database detailing ESG regulations and their impacts, segmented by region and country. This repository will serve as a valuable resource for companies venturing into international construction projects.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.63-75
• /
• 2004

This research sought to determine the status of the installation and operation of domestic public resource-making facilities of resource-making facilities and come up with corresponding improvement measures. Currently compost is most numerous set-up out of facilties already established ever since, then the rest of them are feeds, anaerobic degradation, sewage combination, and combination of compost and feeds in order. As such, food waste is processed more into compost than into feeds, presumably because relevant facilities, which were originally designed for processing into feeds, were converted into composting facilities due to little demand for the processed feeds. The finding says that many related firms had yet to register their businesses in accordance with feeds and fertilizers management laws, and that food waste resources-making facilities used various basic facilities but few of them treated food waste in linkage with leaching water, bad odors, and energy. Some of current facilities were found to be 7 years old and thus outdated. Due to lack of skilled operational manpower, many facilities had less than 300 days of normal operation yearly, and some needed minor and serious repairs periodically. In overall facilities, 87% of the planned food waste was rolled in, thus requiring measures to treat the whole planned volume. For costs of resource-making facilities, some with a capacity of below 50 tons topped 100 million won, and facilities with a capacity of over 50 tons required less installation costs. Overall, installation costs ranged from 10 million to 20 million, and to 200 million won per ton, and this suggests a need to establish the installation cost calculation criteria, as well as to reshape the facility criteria. With operating costs varying greatly according to the size and treatment methods of facilities, the finding indicates a need to rationalize the operating costs, and to plan appropriate-size installation and operation of facilities to ensure economic operation.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.

• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.280-284
• /
• 2010

Approvals of medical device increase every year as industry of medical device grows. Therefore KFDA keeps trying to improve approval systems. However, the firms of medical device are in trouble due to regulation amendment, a firm of small size, exchange of the person in charge. The staffs of KFDA increase their work load because applicants of approval of medical device aren't used to writing of document. Therefore the firm of medical device in business have a long term. KFDA develops eight guidance document item by item for one-step evaluation and approval for Medical Devices because applicants of approval of medical device write documents easily. KFDA reviewer can carry on quick reviewing in use of this eight guidances. This guidance are improved on satisfaction of applicants of approval of medical device.