• 한국대기환경학회지
• /
• 제28권1호
• /
• pp.68-76
• /
• 2012

SULEV (Super Ultra Low Emission Vehicle) which is one of the emission standards in Fleet Average System introduced to Korea from 2009 is known as the most severe standard to achieve with internal combustion engine. Considering low sales volume of hybrid vehicles in Korea, vehicle manufacturers are required to develop SULEV technologies for conventional gasoline and LPG vehicles to meet the future Fleet Average standard. In this study, the comparison of emissions has been made between SULEV developed and ULEV LPG vehicles mainly produced in this time. To estimate the emission reduction of SULEV vehicles, CVS-75 and NIER test modes have been used. CVS-75 has been used for emission certification of gasoline and LPG vehicles. NIER modes cover various average vehicle speed and reflect Korean real driving patterns better than CVS-75. The test results show that SULEV LPG vehicles have very high potential to reduce $NO_x$ in regulated emissions, $N_2O$ in green house gases and toluene in VOCs. However, SULEV LPG vehicles don't affect much on the reduction of CO and total green house gases.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• 한국정보통신학회논문지
• /
• 제21권10호
• /
• pp.1929-1934
• /
• 2017

경량 블록암호화 (Lightweight Encryption Algorithm, LEA)는 연산의 효율성과 높은 보안성으로 인해 가장 각광받고 있는 블록암호화 알고리듬이다. 해당 블록암호화는 실제 응용프로그램에서도 많이 사용되고 있으며 서비스 가용성을 높이기 위해 연산 성능을 개선하는 연구가 많이 진행되고 있다. 본 논문에서는 최신 ARMv8 프로세서 상에서 LEA 연산을 최적화하는 방안에 대해 제안한다. 구현은 새로운 SIMD 명령어 셋인 NEON을 통해 최적화되었으며 병렬화된 연산을 통해 동시에 24 번의 암호화 연산을 수행하도록 한다. 메모리 접근 횟수를 줄이기 위해 활용가능한 모든 NEON 레지스터에 중간 계산값을 할당하여 활용하였다. 해당 구현 결과는 속도 관점에서 평가되었으며 ARMv8 상에서 LEA 암호 구현은 Apple A7 그리고 Apple A9 프로세서 상에서 각각 2.4 cycles/byte 그리고 2.2 cycles/byte 안에 수행 가능함을 확인할 수 있었다.

• 한국정보과학회논문지:정보통신
• /
• 제33권2호
• /
• pp.113-130
• /
• 2006

초고속 인터넷 망이 빠른 속도로 구축이 되고, 네트워크에 대한 해커나 침입자들의 수가 급증함에 따라, 실시간 고속 패킷 처리가 가능한 네트워크 침입 탐지 시스템이 요구되고 있다. 본 논문에서는 일반적으로 소프트웨어 방식으로 구현된 침입 탐지 시스템을 고속의 패킷 처리에 뛰어난 성능을 가지고 있는 네트워크 프로세서를 이용하여 재설계 및 구현하였다. 제한된 자원과 기능을 가지는 다중 처리 프로세서(Multi-processing Processor)로 구성된 네트워크 프로세서에서 고성능 침입 탐지 시스템을 실현하기 위하여, 최적화된 자료구조와 알고리즘을 설계하였다. 그리고 더욱 효율적으로 침입 탐지 엔진을 스케줄링(scheduling)하기 위한 침입 탐지 엔진 할당 기법을 제안하였으며, 구현과 성능 분석을 통하여 제안된 기법의 적절성을 검증하였다.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.15-22
• /
• 2011

An experimental variable rate nursery sprayer was developed to adjust application rates for canopy volume in real time. The sprayer consisted of two vertical booms integrated with ultrasonic sensors, and variable rate nozzles coupled with pulse width modulation (PMW) based solenoid valves. A custom-designed microcontroller instructed the sensors to detect canopy size and occurrence and then controlled nozzles to achieve variable application rates. A spray delivery system, which consisted of diaphragm pump, pressure regulator and 4-cycle gasoline engine, offered the spray discharge function. Spray delay time, time adjustment in spray trigger for the leading distance of the sensor, was measured with a high-speed camera, and it was from 50 to 140 ms earlier than the desired time (398 ms) at 3.2 km/h under indoor conditions. Consequently, the sprayer triggered 4.5 to 12.5 cm prior to detected targets. Duty cycles of the sprayer were from 20 to 34 ms for senor-to-canopy (STC) distance from 0.30 to 0.76 m. Outdoor test confirmed that the nozzles were triggered from 290 to 380 ms after detecting tree canopy at 3.2 km/h. The spray rate of the new sprayer was 58.4 to 85.2% of the constant application rate (935 L/ha). Spray coverage was collected at four areas of evergreen canopy by water sensitive papers (WSP), and ranged from 1.9 to 41.1% and 1.8 to 34.7% for variable and constant rate applications, respectively. One WSP area had significant (P < 0.05) difference in mean spray coverage between two application conditions.

• 에너지공학
• /
• 제21권3호
• /
• pp.237-242
• /
• 2012

이 연구에서는 초음속 연소에서 발생하는 열폐색의 다양한 현상을 규명하기 위해 확대 축소 노즐 내부에서 열폐색에 의해 형성되는 2차원의 초음속의 비정상 유동장에 대한 수치해석 결과를 제시한다. 열폐색에 의해 야기되는 이동 충격파를 수치계산하기 위해 TVD 스킴을 이용하며, 노즐의 확대부의 일정영역에 가열을 통하여 열폐색이 발생할 수 있는 조건을 형성하고, 이 때 발생하는 천이현상을 분리부가 있는 경우와 없는 경우에 대해 불시동현상 발생속도, 비추력의 불안정성 등을 통해 비교, 설명한다. 분리부가 있는 경우가 없는 경우에 비해 열폐색에 의해 발생한 경사 충격파가 느린 속도로 상류측으로 이동하여 분리부의 설치가 엔진 불시동의 지연효과가 있음을 제시하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.353-356
• /
• 2007

With advances in sensor technology, current researches on the pertinent techniques are actively directed toward the way which enables the USN computing service. For many applications using sensor networks, the incoming data are by nature characterized as high-speed, continuous, real-time and infinite. Due to such uniqueness of sensor data characteristics, for some instances a finite-sized buffer may not accommodate the entire incoming data, which leads to inevitable loss of data, and requirement for fast processing makes it impossible to conduct a thorough investigation of data. In addition to the potential problem of loss of data, incoming data in its raw form may exhibit high degree of complexity which evades simple query or alerting services for capturing and extracting useful information. Furthermore, as traditional mining techniques are developed to handle fixed, static historical data, they are not useful and directly applicable for analyzing the sensor data. In this paper, (1) describe how three mining techniques (sensor data outlier analysis, sensor pattern analysis, and sensor data prediction analysis) are appropriate for the USN middleware structure, with their application to the stream data in ocean environment. (2) Another proposal is a middleware structure based on USN environment adaptive to above mining techniques. This middleware structure includes sensor nodes, sensor network common interface, sensor data processor, sensor query processor, database, sensor data mining engine, user interface and so on.

• Tribology and Lubricants
• /
• 제32권5호
• /
• pp.154-159
• /
• 2016

This paper presents an experimental study of the leakage performance and endurance performance of a mechanical face seal in the 7-ton-class turbopump of the Korea Space Launch Vehicle 2 third-stage engine. We install a mechanical face seal between the fuel pump and turbine to prevent the mixing of the fuel and turbine gas. We design and manufacture a prototype mechanical face seal, which has two parts, namely, a bellows seal assembly and mating ring. We set up a test facility to measure the leakage and endurance of the mechanical face seal. For the similarity tests, we use water under real operating conditions such as high rotational speed, high temperature, and high pressure. Through investigation of the leakage and carbon wear rate, it is possible to evaluate the performance of the mechanical face seal. The results of the leakage and endurance performance test demonstrate the absence of any leakage from the prototype mechanical face seal after a trial run and clarify that the acceptable wear rate fully satisfies the turbopump requirements. Finally, we install a qualified mechanical face seal in a 7-ton-class turbopump and perform a validation test in the turbopump real-propellant test facility in the Korea Aerospace Research Institute. The test results confirm that the mechanical face seal works well under real operating conditions.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.373-378
• /
• 2013

엔진의 출력증대와 이에 따른 변속기의 크기 증가 등으로 인한 회전체의 관성증가로 변속기의 변속성능은 악조건이 되고 있다. 따라서, 이를 해결하기 위하여 내마모성이 높은 마찰소재의 개발이 요구된다. 디젤차량 수동변속기용 싱크로나이저 링에 요구되는 마찰특성에 적합한 소재를 개발하고, 이에 대한 접합 특성을 평가하였다. 즉, 철합금 모재와 동합금계 마찰재를 접합하는 공정을 개발하고, 접합층에 대하여 BSE분석, EDX분석을 수행하여 접합특성을 평가하였으며, 해당 시험편에 대하여 전단강도를 평가하였다.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.140-152
• /
• 1989

본 논문에서는 소형 고속 디젤 분무의 반경 방향의 연류 농도 분포를 고려한 비균질 분무의 분무 선단 도달 거리에 대한 관계식을 유도하고, 비정상 분무인 디젤 분무의 분사 차압-시간 곡선을 입력시킴으로써, 분사 초기 뿐 아니라 전 분사 기간의 분무 선단 도달 거리를 예측할 수 있는 새로운 모델을 제안하여 실험치와 비교 분석하였다. 그리고 분사각과 분열장의 무차원 실험식을 도출하여 계산에 사용하였고 분무 선단 도달 거리의 천이점과 분열장에 대하여 고찰하였다.