• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.67-74
• /
• 2019

The automotive market has recently been investing much time and costs in improving existing technologies such as ABS (Anti-lock Braking System) and TCS (Traction Control System) and developing new technologies. Additionally, various methods have been applied and developed to reduce this. Among them, the development method using the simulation has been mainly used and developed. In this paper, we have studied a method to develop SILS (Software In the Loop Simulation) for TCS which can test various environment variables under the same conditions. We modeled hardware (vehicle engine and ABS module) and software (control logic) of TCS using MATLAB/Simulink and Carsim. Simulation was performed on the climate, road surface, driving course, etc. to verify the TCS logic. By using SILS to develop TCS control logic and controller, it is possible to verify before production and reduce the development period, manpower and investment costs.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.344-347
• /
• 2011

본 논문은 한국형 기동헬기(수리온)에 탑재되는 T700/701K 터보 샤프트 엔진의 인증과정에 대해서 기술한다. T700/701K 엔진은 군용 헬기엔진으로 널리 사용되고 있는 GE사의 T700-701C/D엔진을 후방 구동형으로 개조 개발한 엔진이다. 주요 개발 내용은 크게 엔진 장착 요구조건에 의한 후방 구동형 개조, 동력터빈 성능 향상 및 엔진 운전 신뢰성 향상을 위한 2채널 FADEC 시스템 적용 등이다. 따라서 T700/701K 엔진이 수리온에 장착되어 비행을 하기 위해서 엔진 개발규격서의 요구도를 검증하여 정부의 인증을 받아야 한다. 개조 개발에 따른 영향성을 고려하여 성능을 포함한 엔진 주요 요구도는 해석과 시험을 통하여, 그리고 T700-701C/D 엔진과 동일한 부품 및 모듈에 대한 요구도는 유사성(Similarity) 해석을 통하여 검증을 수행 중이며, 2012년 상반기에 군용항공기 감항인증 절차에 따라서 인증이 될 예정이다.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.185-192
• /
• 2016

Low operational cost and high efficiency is absolute requirements in the mass production of the ship engine. Increasing the performance of the fuel injection system in the diesel engine is one kind of solution to improve the efficiency. Modern diesel engines are using electronic control module as the main controller in the fuel injection control system, however the mechanical system still involved in the modern control system. In modern ship engine, a control valve was used in injection fuel to regulate the flow of the fuel. High pressure and friction are intensively occur within this part, therefore high wear resist and low friction coefficient material including fine lubricating are needed. This study is to figure out the wear resist material and proper lubricant in the control valve fuel injection. The experiment has been tested using pin on disk in several treatments those are used various lubricants and non-lubricant condition. Two kinds of lubricant were used in this experiment such as INDERIN AW-32 and paraffin oil. INDERIN AW-32 has a better result compared to non-lubricant condition, which are 20% performance increases than non-lubricant condition. SCM 440 was providing small friction coefficient in the lower velocity. The friction coefficient was constantly maintains at 0.1 m/s of velocity or above respectively with the increment of the loads. Using INDERIN AW-32 and paraffin oil the lowest friction coefficient occurred at the lower load, and increases side by side with the increment of loads.

• 전기학회논문지P
• /
• 제53권1호
• /
• pp.7-13
• /
• 2004

Previously, in order to send information from the local controller to the display board, the hardware or software had to be handled and run through 3-phases, which include the PC-card or PC-add Board, I/F card and Sub board. This study will attempt to design a board that handles information by connecting the USB port of the PC directly to the Sub board. In addition, an MPU will be attached to the previously complex hardware circuit to design a software drive engine module, which allows for the development of new products by modifying only the software engine and not the hardware.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.113-119
• /
• 2011

This paper is a part of the development on the safe navigation model of tugs and barges in Korea waters. desk-top tug-barge simulator is to train the crew of tugs and barges, especially tugs' crew. It is connected with steering and engine telegraph console and winch control console, and can describe three types of operation mode for a tug-barge working unit, towing mode, side by side and push mode. It can also record and assess each simulation run. The evaluation module can confirm the result of a finished simulation run and help trainees to find and correct their faults, and it is composed of result evaluation and process evaluation.

• 드라이브 ㆍ 컨트롤
• /
• 제13권1호
• /
• pp.10-17
• /
• 2016

e-4WD(Electric-4WD) system is a 4WD(4-Wheel Drive) System that can transform a car into a Hybrid System. e-4WD consists of a Motor, Inverter, Speed reducer and Clutch. The Motor, Speed reducer and Clutch are installed on the rear sub-frame as a chassis module type. The inverter is installed separately. Compared to a mechanical 4WD, the e-4WD system has many advantages. For example, the reduced number of drivetrain components makes better use of the space. Driving with a motor only at low speed improves fuel economy and reduces exhaust gas. Engine downsizing is available because the motor assists the engine. The performance of a conventional HEV(Hybrid Electric Vehicle) system can also be maintained. This paper proposes the specifications of components and the control logic for an e-4WD System. And the effect of the e-4WD system is proven using a test vehicle equipped with components under various test conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.161-164
• /
• 2001

This paper partially presents a Hierachical neural network architecture for providing the intelligent control of complex Automatic Transmission(A/T) system which is usually nonlinear and hard to model mathematically. It consists of the module to apply or release an engine brake at the slope and that to judge the intention of the driver. The HNN architecture simplifies the structure of the overall system and is efficient for the learning time. This paper describes how the sub-neural networks of each module have been constructed and will compare the result of the intelligent A/T control to that of the conventional shift pattern.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1377-1384
• /
• 2003

An analysis has been performed for active thermal control of the KOMPSAT monopropellant rocket engine assembly, i.e., dual thruster module(DTM). The main efforts of this work have been directed at determining proper heater sizes for propellant valves and catalyst beds necessary to maintain their temperatures within specified temperature ranges under KOMPSAT environment and operational conditions. The TAS incorporated with TRASYS thermal radiation analyzer was used to establish a complete heat transfer model which allows to predict the DTM temperature as a function of time. The thermal analysis has been performed in transient mode to verify the appropriate power for catalyst bed heaters necessary to increase catalyst bed temperature to the required value within a specified period of time. Similar analysis has been executed to validate the heater power for the thermostatically controlled primary and redundant heater circuits used to prevent hydrazine freezing, i.e., single fault. Moreover the effect of the radiative property of thermal control coating of heat shield was examined. Thruster firing condition was also simulated for the heat soakback condition. As a consequence, all thermal analysis results for DTM satisfactorily met the thermal requirements for the KOMPSAT DTM under the worst case average voltage, i.e. 25 volt.