• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.175-180
• /
• 2003

In this paper, we present a new method for early depth test for a 3D rendering engine. We add a filter stage to the rasterizer in the 3D rendering engine, in an attempt to identify and avoid the occluded pixels. This filtering block determines if a pixel is hidden by a certain plane. If a pixel is hidden by the plane, it can be removed. The simulation results show that the filter reduces the number of pixels to the next stage up to 71.7%. As a result, 67% of memory bandwidth is saved with simple extra hardware.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1894-1899
• /
• 2000

The Roadway caused through Power Train engine vibration and bad ride comfort. It is very important to analyze the vibratory characteristics. The mathematical models on the Power Train, which is composed of engine-/transmission block, universal joint shaft, differential, rear axle arm and wheels, are developed and is verified by the experiments. This Paper describes the coupling influence occurred through a complete drive system for the power train. Dies study is carried out computationally with a calculation program and experimentally with the aid of the mode analysis.

• International Journal of Automotive Technology
• /
• 제5권1호
• /
• pp.23-31
• /
• 2004

Secondary movements of piston in the bore clearance are closely related to the side impact to the engine block as well as many tribological problems. Some of the major parameters that influence these kinds of movements are piston profile shapes (barrel and flat), piston pin offsets and the magnitudes of bore clearances. In our study, computational investigations are performed about the piston movements in the bore clearance by changing the skirt profiles and piston offsets. In this work, it is found that curved profile and larger offset magnitude to thrust side provide better performance that has low side impact during the engine cycle.

• International Journal of Automotive Technology
• /
• 제2권2호
• /
• pp.47-52
• /
• 2001

For the wear protection of cylinder bore in aluminum cast material the internal plasma spraying technology offers a new economical solution. The size and the weight of the engine blocks significantly can be decreased in comparison with the traditional cast iron sleeves. The coefficient of friction between piston ring and cylinder wall sensitively can be reduced and the wear resistance increased from several factors. The paper gives an overview of the technology from the AlSi cast alloys for engine block to the non destructive testing technology used after the machining by diamond honing. The actual results in engines of different types also will be shown. The economical advantages of the plasma spraying (or the internal coating in cylinder bore also will be discussed in comparison with the different alternatives of technology. The aspect of the market introduction also will be discussed in this paper.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.121-128
• /
• 2000

Simple design methods were developed to control the coolant flow rates through cylinder head gasket holes. Applying the concept of flow through an obstruction the ratio of intake to exhaust side flow rates could be easily controlled while maintaining the flow rates per cylinder of the original model. Flow distribution in the coolant passage of the original model was calculated by CFD and the flow rates at the gasket holes were modified based on the calculation results. The calculated flow rated of the modified gasket holes were reasonably close to target values. For more accurate control of the flow rate distribution, a design method with iterative CFD calculations was also suggested. The final size of gasket holes for the target flow rates were obtained just after a few optimization iterations. These methods can be very useful for the optimization of heat transfer characteristics in engine cylinder head and block.

• 한국표면공학회지
• /
• 제30권6호
• /
• pp.400-405
• /
• 1997

The experimental study has been performed to deposit to deposit chromia powder on magnssium alloy for tribological and mechanical properties. The optimal condition was obtained by changing the spray condition such as working distance and gun power. As ceramics was coated onto the a light metal such as Mg according to the weight reduection of the car engine block, it could acquire that the engine efficiency deu to the weight reduction and properties such as resistance to heat, as well as wear. Coating qualities are discussed with respect to hardness, tribologicalproperty, and microstructure. The tribological and mechanical properties are investigated by using the reciprocal configuration tribometer and microharduess tester. Wear mode is determined by observing the SEM morhpology of wear track and cross section view of wear track.

• 한국항만경제학회지
• /
• 제19권2호
• /
• pp.203-219
• /
• 2003

The world Economy has rearranged into three economic block. Especially, the nation's economy in Northeast area are an engine of world economic development. Among these nations in Northeast area china has done a main role of the development of world economy. Owing to raising of the China economy, the Export-Import of container load has rapidly increased in this area. So it is very important of the nation to manage a port. Therefore, the purpose of this paper is to analysis a port of Masan and to search the way of development. To accomplish this purpose, I will analyze a logistics circumstance in northeast area and a port of Pusan and Jinhae. In conclusion, government and local government must enlarge the investment to develope the port of Masan. Local government should do its best effort to solve the problem of port of Masan. And all citizen should recognize that a development of the port of Masan will be the engine of the raising of Masan.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.170-182
• /
• 2024

The dimensional accuracy and consistency of a dual oil circuit centrifugal fuel nozzle are important for fuel distribution and combustion efficiency in an engine combustion chamber. A point cloud measurement method was proposed to solve the geometric accuracy detection problem for the fuel nozzle. An improved variance focus measure operator was used to extract the depth point cloud. Compared with other traditional sharpness evaluation functions, the improved operator can generate the best evaluation curve, and has the least noise and the shortest calculation time. The experimental results of point cloud slicing measurement show that the best window size is 24 × 24 pixels. In the height measurement experiment of the standard sample block, the relative error is 2.32%, and in the fuel nozzle cone angle measurement experiment, the relative error is 2.46%, which can meet the high precision requirements of a dual oil circuit centrifugal fuel nozzle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.321-325
• /
• 2000

Gasket of vehicle engine maintains airtight between cylinder head and engine block under high temperature and pressure, and plays important role in heat conduction of engine. And the characterization of the nonlinear behavior of metal gasket fer various bead shapes is very important as basic research for estimation of gasket durability. But it is very difficult to analyze the behavior of gasket In real experiment. In this paper, to analysis effects of the bead shape on the nonlinear behavior of cylinder head gasket under uniform pressure, the virtual experiment using the nonlinear finite element method was performed. Results are analyzed with residual deformation and the sealing pressure. With the increase of the height and the width of bead, the residual deformation and the sealing pressure increase. And if the height is very high and the width is very narrow, the wrinkles are occurred in the gasket while working.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.252-257
• /
• 2011

본 연구에서는 초경량성 마그네슘 재료를 엔진 블록, 실린더 헤드커버 등과 같은 박용기관에 적용하기 위한 환경 친화적 표면처리의 개발에 대하여 고찰하였다. 또한 이온플레이팅법에 의해 마그네슘 박막을 제작하고, 그 제작조건에 따라 변화하는 막의 결정배향성과 몰포로지가 경도특성에 미치는 영향을 해명하고자 하였다. 마그네슘 박막의 경도측정 결과, 아르곤 가스압의 증가에 따라 그 경도값이 상승하였 는데, 그 원인은 결정립계에 의한 강화와 성분 외 가스입자의 흡장효과에 의한 것으로 사료된다.