• 토지주택연구
• /
• 제4권1호
• /
• pp.23-31
• /
• 2013

The regional economic crises in the late 1990s and the global economic crisis in the late 2000s had reduced the differences in housing policies among the major Asian economies. This paper attempts to explain and compare housing welfare policy shifts between subsidizing home owning and subsidized renting from the perspectives of the economic and social roles of housing, the lock-in effect of policy processes, and the welfare provision strategy of the East Asian economies. It argues that the impact of economic crises on housing welfare policy in East Asia depended on the duration and the intensity of the crisis and the length and severity of the subsequent economic depression. Another important factor was the role of housing in the economic and social development, especially whether housing market development was considered as an engine of economic growth or revival, and whether the tools of housing policy caused the economic crisis. The loss of impetus for home ownership drive and the new emphasis on rental subsidy provision are new policy trends. Nonetheless, the economic revival since mid-2009 has caused the re-introduction of home ownership subsidies for quenching the housing affordability problems and enhancing home ownership making use of the strong economic conditions.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 2005

고성능 로켓엔진의 터보펌프를 구동하기 위한 연료 과농 가스발생기에서 연소 불안정 발생시, 음향 모드 공진주파수를 모사하는 방법을 통하여 모사배관을 결정하였다. 관심 음향모드의 몇 파장만을 모사하여 실제 연소시험에 바로 적용할 수 있는 팎은 길이의 배관도 제시하였다. 가스발생기에서의 연소 불안정을 제어하기 위한 하나의 방안으로, 모사배관의 길이를 변경하여 분사기의 동특성과 연소실의 공진 음향 모드를 서로 분리시킴으로써 상호작용이 일어나지 않게 할 수 있다. 이러한 특성은 연소시 험을 통해 확인되었고, 이를 통하여 비행용 가스발생기의 연소시험과 연소불안정 제어를 위한 한 가지 방안으로서 모사배관을 결정하는 방법을 확립하였다.

• 융합보안논문지
• /
• 제8권4호
• /
• pp.135-143
• /
• 2008

일반적인 HMI system은 원격 감시제어를 네트워크를 통하여 하고 있으나 기능이 제한 적이다. 본 논문에서는 산업용 HMI 시스템을 변형된 상태분할 알고리즘을 적용 하였다. 이 방법은, 미리 예상되는 질의어에 대한 데이터들을 갖고 모델링을 하였다. 그 결과, 모델링하는데 많은 시간이 절약되었고, 시스템을 안정적이고 정밀하게 구성하여 98.15%의 높은 인식률을 나타냈다. 음성 HMI 시스템을 산업용에 적용하여 인간이 직접적으로 활동할 수 없는 작업 환경에서도 산업용 기기들을 안정적으로 구동시킬 수 있다. HMI 시스템 엔진의 성능을 최적화하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.172-174
• /
• 1994

Due to the environmental considerations and the energy crisis, there has been a revival of electric vehicles since 1960s. Research and development work concerning with electric vehicles (EVs) was becoming more intense in last decade. As compared with conventional internal combustion engine (ICE) cars, EVs have the advantages of clean, quiet, better energy efficiency, less maintenance and improving the load factor of electric power systems. However, EVs usually have a snort running range, bad acceleration performance and high initial cost. The main reason for these shortcomings is the low figure of energy density and the high per energy cost of battery at present technology state. So it is very important to optimize the overall drive system design with respect to the maximum utilization of battery, energy, motor torque and inverter power. This paper describes a demonstration model of electric car which is driven by 4-wheel direct method using the vector control.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.840-845
• /
• 2014

Vibration profiles consist of two kinds of pattern, random and harmonic, at general engineering problems and the detailed vibration test mode of a target system is decided by the spectral condition that is exposed under operation. In moving mobility, random responses come generally from road source; whereas the harmonic responses are triggered from rotating machinery parts, such as combustion engine or drive shaft. Different spectral input may accumulate different damage in frequency domain since the accumulated fatigue damage dependent on the pattern of input spectrum in high cyclic loading condition. To evaluate the sensitivity of spectral damage according to different loading conditions, a linear elastic system is introduced to conduct a uniaxial vibration testing. Measured data, acceleration and strain, is analyzed using energy isocline function and then, the calculated fatigue damage is compared by different loading cases, random and harmonic.

• 드라이브 ㆍ 컨트롤
• /
• 제11권2호
• /
• pp.22-29
• /
• 2014

This paper presents simulation-based analysis of energy flow of a wheel loader. The objective of this study is to analyze the energy flow of a wheel loader during driving and working. Because the wheel loader powertrain consists of a mechanical and hydraulic powertrain, the generated power from the engine is divided into 2 powertrains. Further, a virtual prediction of energy flow in the powertrains is a key factor in terms of optimal design. Accordingly, the simulation model that is able to predict the virtual energy flow is developed and analyzed in this study. The proposed wheel loader simulation model has been constructed in the Matlab/Simulink environment. It is expected that the developed simulation model will analyze the energy flow and efficiency in the design stage.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.9-15
• /
• 2019

Sensorless electric superchargers have recently been actively developed to provide a large amount of oxygen to engines in order assist the combustion process for miniaturizing the engines and improving fuel efficiency. The model-based sensorless method for surface-mounted permanent magnet synchronous motors has a disadvantage in that the system may become unstable due to parameter variations in low-speed operation and the rapid-acceleration section. An electric supercharger requires fast response to improve the engine response delay, such as the turbocharger turbo-rack. Therefore, the responsiveness must be improved to use the model-based sensorless system. The position compensation algorithm designed in this study is controlled by converting the position error into the beta, which is the angle formed by the d-axis and the stator current during sudden speed change. In this study, we improved the response of the model-based sensorless system through the algorithm and verified the algorithm validity by applying the algorithm to an actual dual-motor supercharger.

• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.45-53
• /
• 2019

The objective of this study was to design and model the PEM fuel cell excavator with supercapacitor/battery hybrid power source to increase efficiency as well as eliminate greenhouse gas emission. With this configuration, the system can get rid of the internal combustion engine, which has a low efficiency and high emission. For the analysis and simulation, the governing equations of the PEM system, the supercapacitor and battery were derived. These simulations were performed in MATLAB/Simulink environment. The hydraulic modeling of the excavator was also presented, and its model implemented in AMESim and studied. The whole system model was built in a co-simulation environment, which is a combination of MATLAB/Simulink and AMESim software. The simulation results were presented to show the performance of the system.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.18-30
• /
• 2022

Predicting remaining useful life (RUL) becomes significant to implement prognostics and health management of industrial systems. The relevant studies have contributed to creating RUL prediction models and validating their acceptable performance; however, they are confined to drive reasonable preventive maintenance strategies derived from and connected with such predictive models. This paper proposes a data-driven preventive maintenance method that predicts RUL of industrial systems and determines the optimal replacement time intervals to lead to cost minimization in preventive maintenance. The proposed method comprises: (1) generating RUL prediction models through learning historical process data by using machine learning techniques including random forest and extreme gradient boosting, and (2) applying the system failure time derived from the RUL prediction models to the Weibull distribution-based minimum-repair block replacement model for finding the cost-optimal block replacement time. The paper includes a case study to demonstrate the feasibility of the proposed method using an open dataset, wherein sensor data are generated and recorded from turbofan engine systems.

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.87-93
• /
• 2022

In each country, efforts are being made to replace engine-driven cars and motorcycles using fossil fuels with electric drive. Electrically driven vehicles have the advantage of no harmful gas or environmental pollution and low noise. In the motorcycle market, China accounts for more than 95% of the world, and the electric motorcycle market is being revitalized due to the strengthening of regulations. Japan is actively preparing to include electric motorcycles in ISO 26262, forming a TF team centered on electric motorcycle producers. Therefore, it is necessary to respond to standardization targeting China and Japan in Korea. In this study, we propose a proprietary transmission model that can be applied to small electric vehicles that can be operated in hilly domestic terrain. The proposed continuously variable transmission model is a continuously variable transmission system which moves the pin between the basic disk and the rotary disk using a spline to perform shifting. The proposed continuously variable transmission model is used in the pulley configuration by connecting the linear type spline and the inclined spline with the central axis of the basic disk and the rotational disk, respectively. In addition, it can be divided into two types according to the application of the auxiliary disk, and the production drawing is completed for the practical use of the model.