• 한국소음진동공학회논문집
• /
• 제24권8호
• /
• pp.592-599
• /
• 2014

A torsional vibration at driveline happens seriously at rapid vehicle acceleration. The torsional vibration at driveline can be reduced by optimization of joint angle and yoke phase angle of driveline. But, the joint angle of driveline is changed according to vehicle driving condition as acceleration, deceleration, forward and backward driving, so that excessive vibration is transmitted to vehicle body at specific driving condition. Especially under rapid acceleration condition, vibration transmitted to body could be maximized because excitation force at rapid acceleration is bigger than that at normal driving condition due to changed joint angle. The torsional vibration of driveline can be kept at low level by controlling suspension parameter to minimize rigid axle displacement as well as optimizing joint angles considering the vehicle acceleration condition.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.489-490
• /
• 2011

본 논문에서는 병렬형 하이브리드 자동차 (PHEV) 파워트레인 구성요소 정격설계와 내연기관의 최적 운전을 위한 퍼지논리제어에 대하여 기술한다. 내연기관, 전동기, Energy Storage System (ESS)과 같은 파워트레인 구성요소들의 정격은 에너지 개념과 Electrical Peaking Hybrid (ELPH)를 이용하여 설계 하였으며 내연기관의 운전효율을 증가시키기 위해 퍼지논리를 사용하여 파워트레인의 전력흐름을 제어하였다. 제안된 퍼지논리는 설계된 구성요소 정격값을 바탕으로 PHEV PSIM 시뮬레이터를 구성하고 시뮬레이션 하여 그 효용성을 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.985-990
• /
• 1995

Recently, the development of high speed and high precision NC-lathe for piston head machining is needed for the complexity and diversity of the piston head shape used in automobile reciprocating engine. THe piston head has many complex shapes in the aspect of fuel economy, such as ovality, profile, double ovality and recess. Among them, for the maching of the over shape of 0.1~1mm the cutting tool should move periodically symchronized with the rotation of piston workpiece. The cutting tool feeed system must have high positioning accuracy for the precise machining, high speed for the fast maching and high dynamic stiffness for the cutting force. The linear brushless DC motor is used for satisfying these coditions. The ballbush guide and supporting guide using turcite is used for the guidance of the feed drive system. Linear encoder, digital servo ampllifer and controller are used for driving the motor. THis paper presents the design and simulation of the new tool feed system for noncircular machining.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.124-130
• /
• 2014

The automotive industry is moving from the internal combustion engine to electric drive motors. Electric motors uses a high voltage system requiring the development of resources and components to shield the system. Therefore, in this study, we analyze electromagnetic interference (EMI) shielding effectiveness (SE) characteristics of an auto crash pad according to the ratio of electrically conductive materials and propylene. In order to combine good mechanical characteristics and electromagnetic shielding of the automotive crash pad, metal-coated glass fiber (MGF) manufacturing methods are introduced and compared with powder-type methods. Through this study, among MGF methods, we suggest that the chopping method is the most effective shielding method.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.165-168
• /
• 2006

Due to the distinct advantages of comfort, drive ability and fuel economy standard, the variable displacement swash plate type compressor which can control the compressor displacement by increasing of reducing the swash plate angle has developed for automotive air-conditioning system. That can be obtained constant temperature of car room on the variation cooling capacities of engine speeds. In this paper we investigated the improvement of internally controlled variable displacement swash plate compressor on noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.639-644
• /
• 2009

This research is concerned with the application of the active linear actuator to the active vibration control of structure. The active linear actuator will be mounted on the sub-frame so that it can cancel the excitation transferred from the engine. Accelerometer mounted on the sub-frame detects the vibration and its signal is fed into the DSP controller where the control algorithm is installed. The output of the DSP controller is connected to the driver which amplifies the DSP output. In general, the pulse width modulation power amplifier is used to drive the voice-coil type actuator. This study shows the dynamic characteristics of the active linear actuator and active vibration control experimental results.

• 항공우주기술
• /
• 제6권2호
• /
• pp.236-244
• /
• 2007

스마트무인기의 기본 비행성능 파악과 비행제어 알고리즘의 검증을 위하여 40% 축소형 비행체를 개발하였다. 축소형 비행체는 실물기와 유사한 형태의 짐발 허브와 드라이브 장치를 채택하였으며 강제 공랭 방식의 왕복엔진을 장착하였다. 축소형 비행체 주요 부품에 대한 다양한 시험을 수행하였고 조립된 축소형 비행체의 지상시험 및 호버링 시험을 통하여 주요 성능과 기계적 내구성을 확인하였다.

• 한국분무공학회지
• /
• 제12권3호
• /
• pp.154-159
• /
• 2007

Spray tip penetration and spray angle for one main injection were measured at the atmospheric condition with the fuel injection pressure of 270 bar and 540 bar. It investigates an effect of different nozzle hole geometry of conventional cylindrical one and those of elliptical ones. Injection period represented by injector pulse drive was fixed at 1ms. From the result of this study, it is shown that spray tip penetration becomes shorter and spray angle becomes wider with the elliptical nozzle hole geometry due to fast break-up of a fuel liquid column.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.36-42
• /
• 2018

Agricultural tractors require frequent shifting to improve operation efficiency, and PST (Powershift Transmission) is considered as a suitable transmission. However, due to the inherent characteristics of the PST, shocks arise during shifting, which imparts a negative effect on the operator. Therefore, in order to improve the transmission performance of the tractor PST, researches on various methods including the hydraulic system circuit, the engine input speed control, and the mechanical system of the transmission are steadily being conducted. In this study, in order to reduce the impact of PST on a shift based on SimulationX software, we analyzed the characteristics of the input signal of PCV (Pressure Control Valve) through sensitivity analysis and verified the simulation model through actual vehicle test. Optimization was performed for minimizing the shift shock for some of the parameters of the input signal at constant temperature and RPM conditions.