• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.14-22
• /
• 2010

Hybrid Electronic Vehicle (HEV) is one of the solutions of high oil price and environment problem. Recently, study of HEV is important for automobile industry. However HEV has a lot of components and there are many cases for assembling, it's impossible to test results from assembling by using real vehicles. To solve this problem, hybrid system simulator is required. The purpose of this study is to develop and optimize of engine module for hybrid system simulator. The commercial 1-D engine simulation program, WAVE is used to get the engine capacity and performance data and 1-D simulation model of base engine is compared with engine experiment results. Using the data, the engine module is developed based on the MATLAB Simulink. There are blocks of base engine, Single-CVVT engine and Dual-CVVT engine. The effect of acceleration and deceleration is applied to each engine block. In addition, the control and processing logics for CIS technology are developed. Finally the simulator operates FTP-72 mode test.

• 기술사
• /
• 제18권2호
• /
• pp.6-15
• /
• 1985

A new process disregraded the H$_2$SO$_4$ treatment process heretofore in use, was developed and substituted for mineral base engine used oil of homemade SAE-30 grade H.V.I., which was used covering 4,500km, as samples, and the following results in research, was obtained. (1) A good quality of rerefinded base oil was obtained through roughly a course of developed processes of vacuum distillation process, solvent extraction process, neutralization treatment process and clay treatment process. (2) Through vacuum distillation process, the size of fine grains of insoluble colloid carbon that is, colloid carbon which was produced by burning of internal combustion engine oil and fuel, could be brought up and precipitated (3) The insoluble matters and admixtures could be easily dispersed and dissolved by mixing and extracting solvent disregarded the H$_2$SO$_4$ treatment process heretofore in use (4) waste matter heretofore called acid sludge in consequence of the process, did not appear at all. accordingly, the environmental pollution could be removed. (5) The troubles of corrosion to copper strip which was faults of the usual used oil refined products and peculiar offensive odor of the rerefined oil, could be solved through the neutralization process. (6) The yield of rerefined oil obtained through a course of processes was over 86 percent, and it is of practical use, not to speak of commercial value.

• 대한산업공학회지
• /
• 제19권3호
• /
• pp.3-10
• /
• 1993

The main propulsion system may be the most complicated of the shipboard systems. Many factors such as fuel economy, weight, space, first cost, reliability, vibration and noise must be considered when selecting the prime mover of the main propulsion system for ships. An expert system is a computer program that represents and reasons with knowledge of some specialist subject with a view to solving problems or giving advice. Recently, it is being developed increasingly with wider applications in many industries. This paper describes development of knowledge-based system for main engine selection of ships using general purpose expert system development tool, Nexpert Object. Developed system is consist of ship performance estimation module such as resistance and propulsion, data base for main engine, knowledge base for main engine selection in Nexpert Object and graphic user interface.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.67-74
• /
• 2001

A synchronized secondaty air injection method has been developed to hydrocarbon emission by injecting secondary air intermittently into exhaust port. The method has been tested in a single cylinder spark-ignition engine operating at cold-steady / cold-start conditions. Effects of air injection timing, intake pressure and engine air-fuel ratio have been investigated at cold-steady condition. Also, hydrocarbon emission and exhaust gas temperature with catalytic conberter are compared with a continuous SAI method and base condition at cold-start condition. Resules show that hydrocarbon reduction rate and exhaust gas temperature are sensitive to the timing of synchronized SAI. At cold-steady condition, HC emission is minimum at engine air-fuel ratio of 10. At cold-start condition, the accumulated hydrocarbon emission during the first 120 s decreases about 56% and 22% with the synchronized and continuous SAI, respectively, compared to that of base condition.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.1-7
• /
• 1993

전문가시스템을 개발하고, 이를 현업에 적용하려는 노력이 꾸준하게 이어져 왔다. 조선분야에의 전문가시스템 개발은 외국에서 활발하게 이루어지고 있으며, 최근 국내에서도 관심이 증대되고 있다. 본 연구에서는, 초기설계시에 선박의 주기관선정을 지원할 수 있는 설계지원 전문가시스템을 상용 전문가시스템 개발도구를 사용하여 개발하였다. 개발된 시스템은, 성능 추정 모듈, 주기관 데이타베이스, 지식베이스, 그래픽 사용자 인터페이스 및 이들을 연결하는 모듈로 구성되어 있다. 지식베이스에는 약 100여개의 지식이 Rule의 형태로 구축되어 있다. 본 시스템은 설계전문가에게는 설계의 보조수단으로, 초보자에게는 교육용으로 사용가능할 것이다.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.80-88
• /
• 2013

최근 개발되는 엔진 진단 시스템들은 현장에서 일하는 엔진 정비사들이 이들 시스템들의 복잡성, 비실용성, 공학적 이해부족으로 사용하기가 매우 어렵다. 따라서 실용성 있는 엔진 진단시스템이 요구된다. 본 연구는 작동중인 온라인 성능진단 자료와 기본엔진 성능모델에 의해 계산된 초기고장이 없는 엔진 성능자료와의 비교를 통한 소형엔진의 실용적 성능진단 시스템 개발에 관한 것이다. 또한 제안된 성능진단 시스템은 성능이 저하되거나 고장이 난 엔진으로 간주되는 작동 중 엔진과 고장이 없는 엔진으로 간주되는 기본 엔진 성능모델 사이의 구성품 성능특성을 비교함으로서 가스경로 구성품의 온라인 진단을 확인할 수 있다. 개발된 상태진단시스템은 실제 적용을 용이하게 하기위해 SIMULINK와 LabVIEW프로그램을 이용하여 사용자조건의 GUI형 프로그램으로 작성하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.628-637
• /
• 2008

The JAXA's TechCLEAN project(2003-present) is summarized, with the interim technical achievements. TechCLEAN is collateral program with the NEDO engine project to accelerate R&D work of small passenger aircraft engine as well as to develop innovative environment technologies applicable to the future improvements. In the project NOx reduction, CO2 reduction and noise reduction are targeted. Component level researches and system demonstrator validation are planned with test facility renovation and demonstration base engines.

• 농업과학연구
• /
• 제17권2호
• /
• pp.115-129
• /
• 1990

This study was carried out to develop a microcomputer-based data acquisition system and software for analysis of engine vibration. Due to this development of system and software, studies on the vibration of engine was able to conduct efficiently. From the display of CRT, the outputs of test was compared and analysed on a zero-base motoring. The results obtained are summarized as follows : 1. Data acquisition system in microcomputer were designed and programmed and operated accurately. 2. The result of test was easily compared in monitoring of zero-base at color monitor. 3. This system and program developed was able to control the measuring intervals, no. of channels, and no. of data as wated. 4. The type of vibration of engine was type of bi-mode from the FFT and statistical analysis. 5. The maxima of engine vibration were 9.11 G at X-axis. 11.27 G at Y-axis, and 4.9 G at Z axis for full load of net output 6. The maxima of engine vibration unloaded were 4.28 G, 5.59 G, 2.68 G at 2200 rpm.

• 한국정보처리학회논문지
• /
• 제4권12호
• /
• pp.3010-3022
• /
• 1997

1970년대 후반에 제안된 전문가 시스템은 인공지능의 한 분야로서, 인간의 사고방식을 모방함으로써 다양한 분야에서 야기되는 문제들을 해결해준다. 대부분의 전문가 시스템은 추론엔진과 지식베이스등과 같은 많은 요소들로 구성 된다. 특히 전문가 시스템의 성능은 추론엔진의 효율성에 의해 좌우된다. 이러한 추론 엔진은 지식 베이스가 구축될 때, 가능한 한 적은 제약성을 가져야 함은 물론, 다양한 추론 방법을 제공해야 한다는 특징을 갖고 있어야 한다. 이 논문에서는 지식 영역과 추론 방식에 대한 범용성을제공하는 추론 엔진을 설계 및 구현하였다. 이를 위해 추론 방식은 사용자에 의해 전향추론과 후향추론 및 직첩추론이 선택적으로 수행된다. 또한 목표 영역에서의 지식 획득을 위한 쉬운 표준화와 모듈화를 가능케하는 생성 규칙을 사용하였을 뿐만 아니라 확장된 CBM을 통해 지식 베이스를 구축하였다. 아울러, Rete 패턴 매칭과 ECBM을 이용한 추론 엔진간의 성능분석을 수행하였다.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.89-94
• /
• 2010

The most important of rule-base system is the knowledge base that determines the power of rule-base system. The important form of this knowledge is how to descript kinds of rules. The Rule-Base System (RBS) has been using in many field that need reflect quickly change of business rules in management system. As far, when develop the Rule-Based System, we must make a rule engine with a general language. There are three disadvantage of in this developed method. First, while there are many data that must be processed in the system, the speed of processing data will become very slow so that we cannot accept it. Second, we cannot change the current system to make it adaptive to changes of business rules as quickly as possible. Third, large data make the rule engine become very complex. Therefore, in this paper, we propose the two important methods of raising efficiency of Rule-Base System. The first method refers to using the Relational database technology to process the rules of the Rule-Base System, the second method refers to a algorithm of according to Quine McCluskey formula compress the rows of rule table. Because the expressive languages of rule are still remaining many problems, we will introduce a new expressive language, which is Rule-Base Data Model short as RBDM in this paper.