• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.499-507
• /
• 2000

Smooth shift is one of the key issues in automatic power transmission control systems. However, the torque sensors are too expensive to be used in shift controllers on production vehicles. In order to provide a basic strategy for smooth shifting by using RPM sensors only and in order to accomplish the shift within a designated time, this paper studies detailed characteristics of the smooth shift for clutch-to-clutch shift mechanism. A desired trajectory of slip speed is proposed for smooth acceleration shift defined in this paper. Also the clutch torque needed to achieve this trajectory is derived, and it may be used as a open loop shift control law.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.101-109
• /
• 1993

Dynamic characteristics of an electro-magnetic clutch transmission system were investigated by using Bondgraph modeling method. Simulation results showed that when the rotor engaged with the armature, the response time of the current, the driver torque, the rotational speed and the relative sliding time between the driver and the driven side decreased, as the gap size between the rotor and the armature decreased and the number of coil turns increased. Also, when the rotor disengaged with the armature, the delay time increased with the decreased gap size and the increased number of coil turns. It was found that the experimental results of the current, the driver torque, the rotational speeds were in good accordance with the theoretical results. The results of this study can be used as basic design materials of the electro-magnetic clutch.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.129-135
• /
• 2002

The present article deals with the measurement and the numerical calculations far the temperature distribution near the facing of the lockup clutch. The rotating telemetry system is Introduced for the estimation inside high-speed torque converter For the numerical calculation, the effect of the convective heat transfer is considered as well as the conduction to the solid. The estimation shows that the oil temperature near facing rapidly rises as the lockup clutch is engaged. The numerical results shows good agreements with the experimental values for the maximum temperature near the facing of the lockup clutch.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.305-310
• /
• 2007

This paper presents a damper system design in torque converter to minimize the vibration in powertrain of automatic transmission vehicle. The lock-up clutch in torque converter makes engine and transmission connected directly. When the lock-up clutch is engaged the torque fluctuation of engine is attenuated by the damper system. This function decides the vehicle power-train dynamic characteristics. At first, the dynamic hysteresis effect with any self and surface to surface contact problems of the damper springs in the damper system for torque converter is analyzed by using FEM. It is shown that these simulation results have a good design reference to energy dissipation operating by damper system in torque converter. And, to calculate dynamic characteristics, the vehicle model is structured by using $AMESim^{(R)}$?? that is a common use program. The vehicle model shows the frequency response of vehicle by changing the stiffness of damper spring, and these results lead the most suitable stiffness of spring. Also, new damper system is analyzed resonance frequency variation and is compared with prior damper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.556-561
• /
• 2006

In this study, the failure of the automotive clutch disk was investigated. During the process of power transmission, clutch disk plates did repeated work of releasing and engaging the pressure plate. The effects of unbalance rotation in the abnormal vibration and torque amplitude under engaged state were measured from this experiment. In order to reduce the unbalance, a modified clutch disk shape was developed. With a three-dimensional model of the stopper pin, to predict fatigue fracture, finite element analysis was carried out and evaluated the improvement of the new clutch disk.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.112-119
• /
• 2009

An automatic transmission of construction equipment is controlled by hydraulic and electronic system for doing in various functions like as shifting and operation. The shifting is operated by the engaged and disengaged clutch motion from hydraulic power. On the shifting process, suitable pressure control to the clutch is required for smooth shifting. Hydraulic control system in the automatic transmission is divided by the pilot control type and the direct control type greatly. The direct control type has an advantage than the pilot control type. Because the structure is simple, the design and the manufacture are having less troubles and the system can be maximized precision pressure control. However, the excellent performance proportional control valve should be used to achieve proper control-ability. In this study, the dynamic analysis model composing the automatic transmission and hydraulic system for forklift truck is presented to simulate the characteristics of hydraulic system about the direct control type. That model is verified the validity compared the results of the testing examination. Parameters of input signal are analyzed to reduce the output torque according to input control signal is affected in shifting characteristic.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.113-119
• /
• 2005

The passenger car drivers want in general to feel good driveability, but they sometimes feel uncomfortable by shock and jerk phenomenon when they push or release acceleration pedal with clutch engaged. In this paper, the shock and jerk characteristics are studied on the vehicles of the throttle-by-wire system. With this system, the throttle is not directly controlled by drivers but via a microprocessor. So the control logic of the throttle is very important on tip-in and tip-out driveability. Experiments were carried out on two vehicles which show different control characteristics. The torque control logics were analyzed by measuring cylinder pressures. The results show that special torque control logic is needed at tip-in/out state for good driveability.