• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.269-274
• /
• 2013

The present work investigated the dispersion behavior of $Y_2O_3$ particles into AISI 316L SS manufactured using laser cladding technology. The starting particles were produced by high energy ball milling in 10 min for prealloying, which has a trapping effect and homogeneous dispersion of $Y_2O_3$ particles, followed by laser cladding using $CO_2$ laser source. The phase and crystal structures of the cladded alloys were examined by XRD, and the cross section was characterized using SEM. The detailed microstructure was also studied through FE-TEM. The results clearly indicated that as the amount of $Y_2O_3$ increased, micro-sized defects consisted of coarse $Y_2O_3$ were increased. It was also revealed that homogeneously distributed spherical precipitates were amorphous silicon oxides containing yttrium. This study represents much to a new technology for the manufacture and maintenance of ODS alloys.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.86-86
• /
• 2012

The new approaches for silicon solar cell of new concept have been actively conducted. Especially, solar cells with wire array structured radial p-n junctions has attracted considerable attention due to the unique advantages of orthogonalizing the direction of light absorption and charge separation while allowing for improved light scattering and trapping. One-dimenstional semiconductor nano/micro structures should be fabricated for radial p-n junction solar cell. Most of silicon wire and/or pillar arrays have been fabricated by vapour-liquid-solid (VLS) growth because of its simple and cheap process. In the case of the VLS method has some weak points, that is, the incorporation of heavy metal catalysts into the growing silicon wire, the high temperature procedure. We have tried new approaches; one is electrochemical etching, the other is noble metal catalytic etching method to overcome those problems. In this talk, the silicon pillar formation will be characterized by investigating the parameters of the electrochemical etching process such as HF concentration ratio of electrolyte, current density, back contact material, temperature of the solution, and large pre-pattern size and pitch. In the noble metal catalytic etching processes, the effect of solution composition and thickness of metal catalyst on the etching rate and morphologies of silicon was investigated. Finally, radial p-n junction wire arrays were fabricated by spin on doping (phosphor), starting from chemical etched p-Si wire arrays. In/Ga eutectic metal was used for contact metal. The energy conversion efficiency of radial p-n junction solar cell is discussed.

• Composites Research
• /
• 제35권6호
• /
• pp.402-411
• /
• 2022

In this study, the channels-contained hybrid membranes have been fabricated through the incorporation of glass fibers and GO sheets (GO/glass fibers, GG), or a mixture of chitosan/GO (CS/GO/glass fibers, CGG), as hybrid membranes using in organic dye removal. The material properties are well investigated the terms in the morphological, chemical, crystal, and thermal characterizations for verifying interactions in their formed structure. These hybrid membranes have been fitted well in pseudo-second order and Langmuir models that are associated with chemical adsorption and a monolayer approach, respectively. The highest adsorption ability of methylene blue and methyl orange reached 59.40 mg/g and 229.07 mg/g (GG); and 287.47 mg/g and 252.91 mg/g (CGG), which is more enhanced than that of previous GO-based other adsorbents. Moreover, the dye separation on these membranes could be favorable to superb sealing and trapping dye molecules from water instead of only the dye connection occurring on their surface, regarding the physically sieving effect. The membranes can also be reused within two and three adsorbing-desorbing cycles on the GG and CGG ones, respectively. These membranes can become future adsorbents to be applied for wastewater treatment due to their structural features.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.345-350
• /
• 2010

For the present paper, we prepared MgO/MWCNT/$TiO_2$ photocatalyst by using multi-walled carbon nanotubes (MWCNTs) pre-oxidized by m-chlorperbenzoic acid (MCPBA) with magnesium acetate tetrahydrate $(Mg(CH_2COO)_2\cdot4H_2O)$ and titanium n-butoxide $(Ti\{OC(CH_3)_3\}_4)$ as magnesium and titanium precursors. The prepared photocatalyst was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The decomposition of methylene blue (MB) solution was determined under irradiation of ultraviolet (UV) light. The XRD results show that the MgO/MWCNT/$TiO_2$ photocatalyst have cubic MgO structure and anatase $TiO_2$ structure. The porous structure and the $TiO_2$ agglomerate coated on the MgO/MWCNT composite can be observed in SEM images. The Mg, O, Ti and C elements can be also observed in MgO/MWCNT/$TiO_2$ photocatalyst from EDX results. The results of photodegradation of MB solution under UV light show that the concentration of MB solution decreased with an increase of UV irradiation time for all of the samples. Also, the MgO/MWCNT/$TiO_2$ photocatalyst has the best photocatalytic activity among these samples. It can be considered that the MgO/MWCNT/$TiO_2$ photocatalyst had a combined effect, the effect of MWCNT, which could absorb UV light to create photoinduced electrons $(e^-)$, and the electron trapping effect of MgO, which resulted in an increase of the photocatalytic activity of $TiO_2$.

• 한국환경농학회지
• /
• 제21권2호
• /
• pp.83-89
• /
• 2002

고추 종자에 저선량 $\gamma$선을 조사시킨 고추 식물체의 생육과 광합성 능 및 광 스트레스 반응에 미치는 영향을 조사하였다. 저선량 4 Gy가 조사된 고추 식물체에서 광합성에 의한 산소발생이 대조구에 비해 1.5배정도 높은 것으로 나타났다. 고추 잎에 900 ${\mu}mol/m^2/s$의 빛의 세기로 광저해를 4시간 유도하였을 때 최대 광합성능 (Pmax)이 대조구의 경우 20%정도 감소되는 반면 4 Gy 조사구는 3% 정도의 감소를 보였다. Fv/Fm는 광저해가 진행됨에 따라 감소되는 경향을 보이며 대조구의 경우 4시간 처리시 Fv/Fm 값이 50% 정도 감소되는 것을 볼 수 있었다. 반면 4 Gy 조사구는 Fv/Fm값이 대략 37%정도 감소되어 대조구에 비해 광 스트레스에 대해 덜 민감한 것으로 나타났다. Fo는 광저해가 진행됨에 따라 거의 변화가 없었으며 대조구나 4 Gy조사구 사이의 차이도 거의 없는 것으로 나타났다. 광계II의 광양자 수율인 $\Phi_{PSII}$과 광계II 반응중심에 의한 여기 포획률을 나타내주는 1/Fo-1/Fm 또한 광저해가 진행됨에 따라 감소되었으며 4시간을 처리했을 경우 각각 대조구는 47%, 4 Gy 조사구는 30%의 감소를 볼 수 있었다. 비광화학적 소멸인 NPQ는 광저해가 진행됨에 따라 감소되는 경향을 보였으나 대조구와 4 Gy 조사구간에 차이는 없는 것으로 나타났다. 이러한 결과를 볼 때 종자의 종피를 투과한 저선량의 $\gamma$선이 식물의 광합성을 증대시키고 동시에 광 스트레스에 대한 저해를 감소시키는 것으로 보인다.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• 접착 및 계면
• /
• 제22권3호
• /
• pp.91-97
• /
• 2021

본 연구는 Parylene C 유전체 표면에 유기 자기조립단분자막(self-assembled monolayer, SAM) 중간층을 도입함으로써 표면특성을 제어하고 최종적으로 유기전계효과 트랜지스터(organic field-effect transistors, OFETs)의 전기적 안정성을 향상시킨 결과를 제시하였다. 유기 중간층을 적용함으로써, Parylene C 게이트 유전체의 표면 에너지를 제어하였으며, OFET의 가장 중요한 성능변수인 전계효과 이동도(field-effect transistor, μ_FET)와 문턱 전압 (threshold voltage, V_th)의 성능향상과 구동 안정성을 증대시켰다. 단순히 Parylene C 유전체를 적용한 Bare OFET에서 μ_FET 값은 0.12 cm²V^-1s^-1가 측정되었으나, hexamethyldisilazane (HMDS)과 octadecyltrichlorosilane (ODTS)를 중간층으로 적용된 소자에서는 각각 0.32과 0.34 cm²V^-1s^-1로 μ_FET가 증가하였다. 또한 1000번의 transfer 특성의 반복측정을 통해 ODTS 처리한 OFET의 μ_FET와 V_th의 변화가 가장 작게 나타남을 확인하였다. 이 연구를 통해 유기 SAM 중간층, 특히 ODTS는 효과적으로 Parylene C 표면을 알킬 사슬로 덮어 극성도를 낮춤과 함께 전하 트래핑을 감소시켜 소자의 전기적 구동 안정성을 증가시킬 수 있음을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.113-116
• /
• 2005

In this paper, silicon thin-film solar cells(Si- TFSC) and a-Si/c-Si heterojunction solar cells(HJ-cell) are investigated. The Si-TFSC was prepared on glass substrate by depositing $1-3{\mu}m$ thin-film silicons by glow discharge method. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells on textured ZnO:A1 TCO (transparent conducting oxide) showed improved Jsc in top and bottom cells than that on $SnO_2:F$ TCO. This enhancement of jsc resulted from improved light trapping effect by front textured ZnO:A1. The a-Si/c-Si HJ-cells with simple structure without high efficiency features are suffering from low Voc and Jsc. The improvement of front nip and back interface properties by adopting high quality silicon-films at low temperature should be done both for increasing device performances and production cost.

• 공업화학
• /
• 제22권2호
• /
• pp.190-195
• /
• 2011

다중층을 형성하여 광자를 가두는 효과와 산란층의 효과를 보고, $TiCl_4$ 처리를 통해 전극에서의 전자의 재결합이 줄어드는 정도와 그에 따른 효과를 알아보기 위하여 여러 가지 방법으로 $TiO_2$ 전극을 형성하고, 가장 최적의 전극 조건을 알아보았다. 각 전극의 특성을 알기 위해서 I-V 곡선, UV-VIS 분광기, EIS, IPCE를 측정하였다. 그 결과, I-V 곡선을 통해 한 층 보다는 다중층이 효율이 더 높은 것을 확인할 수 있었고, 기판 표면과 전극표면에 $TiCl_4$ 처리를 함으로써 EIS분석을 통해 반응저항이 감소하여 효율이 증가함을 확인할 수 있었다. 여러 전극 조건 중 산란층을 지닌 전극이 기본 한 층을 사용한 전극의 효율보다 약 19% 정도 높아짐을 확인하였다. 이러한 효율의 증가는 장파장을 투과하는 빛이 산란층을 통과할 때 전자 이동 경로가 길어지게 되어 단락전류의 값을 증가시키기 때문이다. 이에 따라, $J_{SC}$는 약 10% 정도 증가하였으며, IPCE는 최대 피크에서 약 12%가 향상되는 특성을 보였다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2860-2866
• /
• 2020

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.