• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.739-746
• /
• 2009

This paper introduces facility operation modeling and simulation based primarily on a discrete event system modeling scheme. Many modern industrial facilities are so complex that their operational status cannot be estimated by simple calculations. In general, a facility can consist of many processes and transfers of material between processes that may be modeled as a discrete event system. This paper introduces the current status of studies on operation modeling and simulation for typical nuclear facilities, along with some examples. In addition, this paper provides insights about how a discrete event system can be applied to a model for a nuclear facility. A headend facility is chosen for operation modeling and the simulation, and detailed procedure is thoroughly described from modeling to an analysis of discrete event results. These kinds of modeling and simulation are very important because they can contribute to facility design and operation in terms of prediction of system behavior, quantification of facility capacity, bottleneck identification and efficient operation scheduling.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1466-1472
• /
• 2018

A key comparison has been made between the air-kerma standards of the National Institute of Metrology (NIM), China, and other Asia Pacific Metrology Programme (APMP) members in the medium-energy X-ray. This paper reviews the primary standard Free-air ionization chamber correction factor experimental method and Monte Carlo simulation method in the NIM. The experimental method and the Monte Carlo simulation method are adopted to obtain the correction factor for the medium-energy X-ray primary standard free-air ionization chamber at 100 kV, 135 kV, 180 kV, 250 kV four CCRI reference qualities. The correction factor has already been submitted to the APMP as key comparison data and the results are in good agreement with those obtained in previous studies. This study shows that the experimental method and the EGSnrc simulation method are usually used in the measurement of the correction factor. In particular, the application of the simulation methods is more common.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.67-74
• /
• 2014

The fluctuation of the output power of wind farms will be able to cause the impact on the Jeju power system such as power quality and stability. To settle the matter, many researchers have proposed the use of the BESS(Battery Energy Storage System) in the wind farm. In this paper, The BESS is applied to each wind farms for mitigating the fluctuation of wind power output. The BESS is controlled for smoothing the output of wind farms. Two kinds of simulation will be carried out. First, the simulation results by using PSCAD/EMTDC simulation program are compared to the measured data from the real power grid in Jeju Island. The other is to analyze the output of wind farms when the BESS is applied to the simulation works. The simulation results will demonstrate the effectiveness of using BESS to stabilize for power grid in Jeju Island.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.813-822
• /
• 2012

In this study, the multizone simulation for biosafety of BSL3 lab. and energy simulation are carried out simultaneously by using linked model of CONTAM and TRNSYS. In BSL3 lab., annual energy consumption is approximately five to ten times more than the magnitude of the office building. This is because required air change rate is extremely large and it is difficult to maintain room pressure difference efficiently. To maintain pressure difference between laboratory rooms through sealing condition of doors and proper airflow control is significant. In this study, to predict indoor environment of the BSL3 lab.(Influenza A research lab.), the multizone simulation for four kinds of biohazard scenario is also performed as part of risk assessment. Multizone and energy simulation results by using linked model show that these approaches are used as a tool for the energy efficient design and operation method for the safer BSL3 lab. facilities.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.469-476
• /
• 2015

The purpose of this work is to investigate main factors to design a solid-state hydrogen stroage system with magnesium hydride with 10 wt% graphite using numerical simulation tools. The heat transfer characteristic of this material was measured in order to perform the highly reliable simulation for this system. Based on the measured effective thermal conductivity, a transient heat and mass transfer simulation revealed that the total performance of hydrogen storage system is prone to depend on heat and mass transfer behaviors of hydrogen storage medium instead of its inherent kinetic rate for hydrogen adsorption. Furthermore, we demonstrate that the thermodynamic aspect between equlibrium presssure and temperature is one of key factor to design the hydrogen storage system with high performance using magnesium hydride.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.777-781
• /
• 2012

In this paper, an electrical power simulation program was developed to predict the energy consumption of the electrical railway propulsion system, which considered the actual operating conditions of the electric railway vehicles. The developed program was designed to predictable the energy consumption during a virtual driving in the actual route of the virtual railway vehicles equipped with a propulsion system consisting of power conversion equipments and traction motors. In addition, the accuracy verification of the electrical power simulation program for a propulsion system was performed by using a real power consumption data, which was measured during the driving of the railway vehicles in the Gyeongui Line. In conclusion, the electrical power simulation program for a propulsion system was validated throughout a comparative investigation between the simulated values and the experimental values and the energy consumption characteristics of electric railway vehicles on the existing route or the new route will be possible to predict throughout the virtual simulation considering the driving conditions of the electric railway vehicles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.190-190
• /
• 2016

The Water, Energy, and Food (WEF) nexus is an emerging concept for sustainable resources planning and management. The three valuable resources are inevitably interconnected, that is, it takes water to produce energy; it takes energy to extract, treat, and distribute water; and both water and energy are required to produce food. Although it is challenging to fully understand the complicated interdependency, a few studies have been devoted to interpret the concept and develop the assessment tools. The tools were mainly developed for nation-wide simulations without considering inter-basin or inter-state resources trade. This study tries to present an idea to develop and implement the WEF nexus simulation model in regional scale by advancing the existing nation-wide model with additional capability to simulate the inter-basin trade. This simulation could help local planners and engineers to determine optimal policies and infrastructure solutions to reach and ensure local demand satisfaction. The simulation model is implemented in hypothetical areas with different conditions of WEF demands and supplies. Although the inter-basin trade scenarios are simulated manually, it shows that the inter-basin resources trade could enhance the resources security for a longer time period. In future, an optimization model might be developed to provide the automatic calculation to reach optimum amount of WEF for the trade, which can be a helpful tool in decision making process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.302-302
• /
• 2010

비정질 실리콘 박막 태양전지의 설계에 있어서 빛을 처음 받아들이는 p-layer는 전체적인 태양전지 특성에 큰 영향을 준다. 본 논문에서는 window layer의 gas flow rate 변화에 따른 특성이 태양전지에 미치는 영향에 대한 simulation을 수행하였다. 가변 조건으로는 window layer의 산소와 붕소 양에 따른energy bandgap과 conductivity 그리고 activation energy를 단계별로 변화시켜 simulation을 수행하였다. Simulation 결과 산소와 붕소의 양에 따른 window layer의 특성은 태양전지의 특성에 큰 영향을 끼친다. 본 연구는 simulation data를 기반으로 real device 제작하는데 큰 도움이 될 것이다.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.161-167
• /
• 2007

Zero Energy Multi-House(ZeMH) signifies a residential building which can be self sufficient with just new and renewable energy resources without the aid of any existing fossil fuel. For success of ZeMH, various innovative energy technologies Including passive and active systems should be well integrated with a systematic design approach. The first step for ZeMH is definitely to minimize the conventional heating and cooling loads over 50% with major energy conservation measure and passive solar features which are mainly related to building design components such as super-insulation, super window, including infiltration and ventilation issues. The purpose of this study is to analyze the thermal effect of various building design components in the early design of ZeMH. The process of the study is presented in the following. 1) selection reference model for simulation 2) verification of reference model with computer simulation program(ESP-r 9.0). 3) analysis of effect according to insulation-thickness, kinds of windows, rate of infiltration. and The simulation results indicate that almost 50% savings of conventional heating load in multi-house can be achieved with the optimum design of building components such as super insulation, super window, infiltration, ventilation.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.1
• /
• pp.38-44
• /
• 2011

In this study, heating performance and energy consumption characteristics with control strategies for central heating system were researched by the simulation. The simulation analysis is made by TRNSYS ver. 15 with the actual data. The parametric study on proportional factor, control time interval and outdoor air temperatures changes were done to compare control characteristics and energy performance, respectively. As a result, the simulation results with various parameter changes show good heating performance and energy saving.