• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Journal of Internet Computing and Services
• /
• v.17 no.5
• /
• pp.17-23
• /
• 2016

Wireless sensor-actuator networks (WSANs) enhance the existing wireless sensor networks (WSNs) by equipping sensor nodes with an actuator. The actuators work with the sensor nodes and perform application-specific operations. The WSAN systems have several applications such as disaster relief, intelligent building, military surveillance, health monitoring, and infrastructure security. These applications require capability of reliable data transfer to act responsively and accurately. Biologically inspired modeling techniques have received considerable attention for achieving robustness, scalability, and adaptability, while retaining individual simplicity. In this paper, an epidemic-inspired algorithm for data dissemination with delay constraints while minimizing energy consumption in WSAN is proposed. The steady states and system stability are analyzed using control theory. Also, simulation results indicate that the proposed scheme provides desirable dissemination delay and energy saving.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.548-554
• /
• 2010

In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.3
• /
• pp.245-255
• /
• 2016

The alternating flow hydraulics (AFH) had demonstrated the unique features in the past. One of the most well-known inventions was the hydraulic machine-gun synchronizer, which had become the standard equipment of airplane during World War I. The studies on the AFH between 1960 and 1980 had trigged many researchers' interests and reached the summit. The disadvantages of the AFH like low efficiency and cooling difficulty had prevented the further development. Few people are engaged in studying the AFH at present. However, the unique characteristics of the AFH inspire the researchers to continuously explore the new special suitable applications. The overviews of the AFH and the new potential application in the geotechnical testing field have been discussed in this paper. First, the research results of the AFH in the past have been summarized. Then, the classifications of the AFH have been introduced in detail according to the working principle, the number of hydraulic transmission pipelines and the mode of input energy. The advantages and the disadvantages of the AFH have been discussed. A novel potential suitable application in the soil test field has been presented at last. The detailed designing ideas of a new dynamic trixial instrument have been given, which will be a more innovational and energy-saving plan according to the current studies. A series of simulation experiments have been done. The simulation results show that the proposed scheme for the new dynamic trixial instrument is feasible. The paper work will also give some inspirations in the reciprocating motion control system.

• Particle and aerosol research
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2016

In order to realize In-line and convenient measurement for solid-gas two phase flows, Light Transmission Fluctuation (LTF) based on the random variation of transmitted light intensity, light scattering theory and cross-correlation method was presented for online measurement of particle size, concentration and velocity. The statistical relationship among transmitted light intensity, particle size and particle number in measurement zone was described by Beer-Lambert Law. Accordingly, the particle size and concentration were determined from the fluctuation signal of transmitted light intensity. Simultaneously, the particle velocity was calculated by cross-correlation analysis of two neighboring light beams. By considering the influence of concentration variation in industrial applications, the improved algorithm based on spectral analysis of transmitted light intensity was proposed to improve measurement accuracy and stability. Therefore, the online measurement system based on LTF was developed and applied to measure pulverized coal in power station and raw material in cement plant. The particle size, concentration and velocity of powder were monitored in real-time. It can provide important references for optimal control, energy saving and emission reduction of energy-intensive industries.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.80-83
• /
• 2016

In this paper, a simplified uplink transmission procedure is proposed for reducing energy consumption and improving lifetime of CIoT devices. In the proposed procedure, the CIoT devices register information on their service and traffic to the networks, and the networks statically allocate pre-defined amounts of radio resources when the CIoT devices have requested permission for their uplink transmissions. This paper provides details of the proposed procedure comparing with those of the current GSM procedure, and defines detailed operations of the devices and the networks for the proposed one. This shows that the proposed scheme can effectively support CIoT services on GSM networks.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3441-3449
• /
• 2023

We determined the radiation shielding properties for 10CaO-xPbO-(90-x) deteriorated silica gel (DSG) glass system (x = 20, 25, 30, 35, 40, and 45 mol.%). The mass attenuation coefficient (MAC) has been estimated at photon energies of 74.23, 97.12, 122, 662, 1173, and 1332 keV using a narrow beam X-ray attenuation and transmission experiment, the XCOM program, and a PHITS simulation. The obtained MAC values were applied to estimate the half value layer (HVL), mean free path (MFP), effective atomic number, and effective electron density. Results show that the MAC value of the studied glasses ranges between 0.0549 and 1.4415 cm²/g, increases with the amount of PbO, and decreases with increasing photon energy. The HVL and MFP values decrease with increasing PbO content and increase with increasing photon energy. The recycled glass, with the addition of PbO content (20-45 mol.%), exhibited excellent radiation shielding capabilities compared to standard barite and ferrite concretes and some glass systems. Moreover, the experimental radiation shielding parameters agree with the XCOM and PHITS values. This study suggests that this new waste-recycled glass is an effective and cost-saving candidate for X-ray and gamma-ray shielding applications.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.301-322
• /
• 1996

This study is first aimed at identifying the possibility of labour saving and production cost decreasing in rice production with respect to seed broad casting technology. Comparison of labour inputs and production costs of rice in-between USA and Korea and recommendation of policy guidelines for the continous rice cultivation are the second objective of this study. Under the WTO system, rice enterprice is the most vulnerable crop in the sense of labour productivity and price competitiveness in the international market. How to adapt labour saving technology and how to decrease production costs are the most imminent problems to be solved in rice production. To achieve the objectives, survey on nine rice enterprice farms were made in Daeho tidal farmland with respect to the size of farm, labour inputs, productivity, farm mechanization and farm land base development. The existing data on labour saving technology by seed broadcasting which had surveyed by Rural Development Administration were collected to compare the surveyed data from Daeho tidal farm land The study results and policy recommendation are summarized as follows; 1. Labour requirements per 10a for rice enterprise farms with seed broadcasting and with transplanting were estimated 11.4 and 18.5hours respectively. 'This above labour inputs were equivalent to 1/3-1/5 of the national average labour inputs of 53.6 hours which were included transplanting and harvesting by machinery. Considering the labour requirement of 1.7 hours per 10a for the USA rice production, Korea rice culture has possibility to decrease labour demand upto USA level of labour inputs. 2. Production cost of rice in Korea were estimated US$4,181 per ha which were higher than that of USA by 3.00 times and production costs per ton were shown as US$313 for USA rice and US$1,018 for Korean rice. 3. Land productivity of rice per 10a in America was reached to 4,325kg and the counterpart of Korea was about 4,181kg in recent year. In the sense of land productivity, both yields of rice were comparable. 4. The price of japonica type rice similar to Korean traditional rice in international market in 1994 was f.o.b US$466 per ton which was equivalent to import parity price of US$830 per ton in domestic market. The price of rice purchased by Korean G't and received by farmers were amounted to US$ 2,013 and US$ 1,663 respectively in the same year. Domestic prices mentioned above were higher than the import parity price as US$830 by 2.0-2.4 times. 5. American rice production competitive to Korean rice was equivalent to 17,012 thousand tons, 1.28% of the world production of rice in 1991 and consumption of rice in America was amounted to 2,633 thousand tons. Exportable quantity of USA rice were estimated as 4,379 thousand tons of which 52.3%, 2,300 thousand tons, were exported indeed in the same year. 6. The quantity of Korean rice produced in 1991 was estimated 1.00% of the world production. The world amount of rice exported in 1991 was reached to 2.45% of the world production of which 34.2% was occupied by USA The remaining quantities of world exported rice were dominated by Tiland, Pakistan and Vietnam where produced indica variety. 7. Under the given technology, labour inputs per 10a for rice production could be possible to save by 70% of the national average labour requirement of 53.6 hours through implmenting complete farm mechanization with land consolidation and on-farm development and improvement of fanning practices like seedbroad casting txchnology etc. On the other hand, prduction costs of rice could be decreased by 10% rather than 49% as target indicated in the Rural Development Counter Measures of Korean Government in 1994 owing to increasing farm mechanization cost and interest on land service with high price. Accordingly production cost of rice per kg could be decreased only by 10% of the 1994 production cost. 8. Rice policy of Korean government in the future should take into account the labour saving technology to solve labour shortage in rural area and to enhance off-farm incomes by creating job opportunities in agro-industrial zones and special production area. On account of the staple food and main energy source for people's health, rice production even encountered vulnerable economic settings should be continued without price distortion policies and discouraging farmer's intention to cultivate rice by importing institutionally the direct income subsidy system.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.126-133
• /
• 2008

Current changing to the customer-oriented market naturally causes suppliers to meet an age of competition on the quality. In order to plan housing meeting this quality competitiveness era, I set up the type classification system of quality differentiation for the unit of apartment housing by executing differentiation cases of unit quality and type analysis of the object. The system is consist of 3 classification systems by quality element, user convenience element and product element as follows: First element is to classify quality element on the basis of plane and interior elements, architectural elements and second one is user convenience element relating facility to classify environment-oriented, safety, energy saving and convenience. The other one is the product element to classify furniture, installing product and convenient product. I believe that this classification system will be useful to determine any classification elements of product for product positioning and product planning in the stage of marketing planning of apartment housing in the future.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.3
• /
• pp.53-59
• /
• 2020

This paper proposes color segmentation for detecting missing persons in a smart lighting system using radar and camera sensors. Recently, smart lighting systems built-in radar and cameras have been efficient in saving energy and searching for missing persons, simultaneously. In smart lighting systems, radar detects moving objects and then the lights turn on and camera records. The video recorded is useful to find out missing persons. The color of their clothes worn in missing persons is one of critical hints to look for missing persons. Therefore, color segmentation is an effective means for detecting the color of their clothes. In this paper, during the color segmentation step, the ROI(Region of interest) setting based on the size of an object is applied and the background is reduced. According to experimental results, the color segmentation has good accuracy of more than 97%.