International Journal of Fluid Machinery and Systems

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

Study on the Alternating Flow Hydraulics and Its New Potential Application in the Geotechnical Testing Field

  • Sang, Yong (School of Mechanical Engineering, Dalian University of Technology) ;
  • Han, Ying (School of Mechanical Engineering, Dalian University of Technology) ;
  • Duan, Fuhai (School of Mechanical Engineering, Dalian University of Technology)
  • 투고 : 2014.08.08
  • 심사 : 2015.09.15
  • 발행 : 2016.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The alternating flow hydraulics (AFH) had demonstrated the unique features in the past. One of the most well-known inventions was the hydraulic machine-gun synchronizer, which had become the standard equipment of airplane during World War I. The studies on the AFH between 1960 and 1980 had trigged many researchers' interests and reached the summit. The disadvantages of the AFH like low efficiency and cooling difficulty had prevented the further development. Few people are engaged in studying the AFH at present. However, the unique characteristics of the AFH inspire the researchers to continuously explore the new special suitable applications. The overviews of the AFH and the new potential application in the geotechnical testing field have been discussed in this paper. First, the research results of the AFH in the past have been summarized. Then, the classifications of the AFH have been introduced in detail according to the working principle, the number of hydraulic transmission pipelines and the mode of input energy. The advantages and the disadvantages of the AFH have been discussed. A novel potential suitable application in the soil test field has been presented at last. The detailed designing ideas of a new dynamic trixial instrument have been given, which will be a more innovational and energy-saving plan according to the current studies. A series of simulation experiments have been done. The simulation results show that the proposed scheme for the new dynamic trixial instrument is feasible. The paper work will also give some inspirations in the reciprocating motion control system.

키워드

참고문헌

  1. Constantinesco, G., 1922, Theory of Wave Transmission(Second edition), Walter Haddon, London.
  2. Constantinesco, G., 1926, "The Torque Converter," Journal of the Royal Society of Arts, Vol. LXXV, No. 3866, pp. 145-177.
  3. Richardson, E.G., and Tyler, E., 1929, "The Transverse Velocity Gradient near the Mouths of Pipes in Which an Alternating or Continuous Flow of Air Is Established," Proc. Phys. Soc., Vol. 42, No. 1, pp. 1-15. https://doi.org/10.1088/0959-5309/42/1/302
  4. Arthur, S. I., 1950, "Attenuation of Oscillatory Pressures in Instrument Lines," U.S. Department of Commerce National Bureau of Standards, No. 45, pp. 85-108.
  5. Shigeo, U., 1956, "The Pulsating Viscous Flow Superposed on the Steady Laminar Motion of Incompressible Fluid in a Circular Pipe," Zeitschrift fur angewandte Mathematik und Physik, Vol. 7, No. 5, pp. 403-422. https://doi.org/10.1007/BF01606327
  6. Brown, F. T., 1962, "The Transient Response of Fluid Lines," J. Basic Eng., Vol. 84, No. 4, pp. 547-553. https://doi.org/10.1115/1.3658705
  7. Foster, K., and Parker, G. A., 1964, "Transmission of Power by Sinusoidal Wave Motion through Hydraulic Oil in a Uniform Pipe," Proceedings of the Institution of Mechanical Engineers, Vol. 179, No. 1, pp. 599-614. https://doi.org/10.1243/PIME_PROC_1964_179_040_02
  8. Pollard, F., 1965, "Pulsating Flow Hydraulic Concepts," Society of Automotive Engineers international, No. 7, pp.23-27.
  9. Cheng-kuo, W., 1966, "Transmission of Fluid Power by Pulsating-Flow (P-F) Concept in Hydraulic Systems," ASME J. Basic Eng., Vol. 88, No. 2, pp.316-321. https://doi.org/10.1115/1.3645853
  10. Eizo, U., Toshio, T., Sadami, A., Teruo, A., Ikuo, K., and Morio, S., 1974, "A Study on AFH," Bulletin of the JSME, Vol. 17, No. 106, pp.467-478. https://doi.org/10.1299/jsme1958.17.467
  11. Fox, G.L., and Stepnewski, JR., D.D., 1974, "Pressure Wave Transmission in a Fluid Contained in a Plastically Deforming Pipe," Journal of Pressure Vessel Technology, Vol. 96, No. 4, pp. 258-262. https://doi.org/10.1115/1.3454178
  12. Ukrainetz, P. R., Nikiforuk, P. N., and Vandenberghe, D. G., 1970, A Three Phase Pulsating Flow Hydraulic Control System, Defense Technical Information Center, Virginia.
  13. EI-Ibiary, Y., and Ukrainetz, P.R, 1978, "Analysis of a Three-Phase Pulsating Flow Hydraulic System," Transactions of the Canadian Society for Mechanical Engineers, Vol. 5, No. 1, pp. 24-30. https://doi.org/10.1139/tcsme-1978-0004
  14. Davis, D., and Dransfield, P., 1983, "Alternating Flow Hydraulics," Eighth Australasian Fluid Mechanics Conference, pp. 9C.6-9C.9.
  15. Mohammad, W. A., 1982, Pulsating Flow Effects on Flowmeters, University of Surrey, Guildford.
  16. Hadj-Taieb, E., and Lili, T., 2000, "Validation of Hyperbolic Model for Water-Hammer in Deformable Pipes," Journal of Fluids Engineering, Vol. 122, No. 1, pp. 57-64. https://doi.org/10.1115/1.483227
  17. Carpenter, P., Berkouk, K., and Lucey, A., 2003, "Pressure Wave Propagation in Fluid-Filled Co-Axial Elastic Tubes Part 1: Basic Theory," Transactions of the ASME, Journal of Biomechanical Engineering, Vol. 125, No. 6, pp. 852-856. https://doi.org/10.1115/1.1634280
  18. Carpenter, P., Berkouk, K., and Lucey, A., 2003, "Pressure Wave Propagation in Fluid-Filled Co-Axial Elastic Tubes Part 2: Mechanism for the Pathogenesis of Syringomylia," Journal of Fluids Engineering, Vol. 135, No. 12, pp. 857-863.
  19. Mika, I., 2007, "Damping of Low Frequency Pressure Oscillation," Ph. D. Thesis, Tampere University of Technology, Tampere, Finland.
  20. Zhongguo, S., and Guang, X., 2009, "Numerical Study of Pressure Wave Transmission in Liquid under Different Interface Conditions Using Particle Method," Proceedings of the ASME 2009 Fluids Engineering Division Summer Meeting, pp. 1-8.
  21. Ioan, I. P., and Ioana, D. P., 2009, "Sonic Solution for the Reduction of Weight of the Wind Tower Nacelle," Environmental Engineering and Management Journal, Vol. 8, No. 1, pp.73-79.
  22. Ding, W. S., and Wu H. Y., 2009, "Analysis of Pulsating Flow Hydraulic System Characteristic," International Conference on Mechanic Automation and Control Engineering (MACE), pp. 2318-2322.
  23. Ioan-Lucian, M., 2011, "Approaches in Hydraulic-Rotary Hydraulic Motor Driven With Alternating Flows and Harmonic Pressures," Hidraulica, Vol. 3, No. 4, pp. 63-68.
  24. Ioan-Lucian, M., 2012, "Daniel-Vasile Banyai. Fundamental Research on Hydraulic Systems Driven by Alternating Flow," Acta Polytechnica, Vol. 52, No. 4, pp. 96-99.
  25. Murgo, JP., Westerhof, N., and Giolma, JP., 1980, "Aortic Input Impedance in Normal Man - Relationship to Pressure Wave Forms," Circulation, Vol. 62, No. 1, pp. 105-116. https://doi.org/10.1161/01.CIR.62.1.105
  26. Charonko, J., Ragab, S., and Vlachos, P, 2009, "A Scaling Parameter for Predicting Pressure Wave Reflection in Stented Arteries," J. Medical Devices, Transactions of the ASME, Vol. 3, No. 1, pp. 011006-(1-10). https://doi.org/10.1115/1.3089140
  27. Jones C. J. H., Parker K. H., Hughes R., and Sheridan D. J., 1992, "Nonlinearity of Human Arterial Pulse Wave Transmission," Journal of Biomechanical Engineering, Vol. 114, No. 1, pp. 10-14. https://doi.org/10.1115/1.2895433
  28. Fengling, Z., 1978, "The Theory and the Applications of the AFH," Machine Tool & Hydraulics, No. 5, pp. 1-9.
  29. Wang, Z. F., 2009, "The Development and Practice for Pulsating Flow Laboratory Bench," Ph. D. Thesis, Yanshan University, Yanshan, China.
  30. Brennen, T., 2011, "Design, Modeling, and Control of Hydrostatic Transmissions for Wind Turbines," Ph. D. Thesis, University of Minnesota, Minneapolis, USA.
  31. Cullingford, G., Lasshine, and A., Parr, G. B, 1972, "Servo Controlled Equipment for Dynamic Triaxial Testing of Soils," Geotechnique, Vol. 22, No. 3, pp. 526-529. https://doi.org/10.1680/geot.1972.22.3.526
  32. Zhang J., and Zhu R., 2002, "Design of Servo Controlled Cyclic Triaxial Test System by Improvement on Static Triaxial Test Equipment," Chinese Journal of Geotechnical Engineering, Vol. 24, No. 6, pp. 787-789.
  33. Sang, Y., and Shao, L., 2008, "The Experimental Analyses and Improvement Discussion of a Hydraulic Sine Wave Generating Device," International Conference on Computer Science and Software Engineering, pp. 132-136.
  34. Sang, Y., and Shao, L., 2009, "A New Design without Pressure Fluctuation for the Dynamic&Static Triaxial Instrument," International Conference on Computer Engineering and Technology, pp. 468-473.