• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.961-972
• /
• 2008

In 2004, total emissions of Greenhouse Gases(GHGs) in Korea was estimated to be about 590 million metric tons, which is the world's 10th largest emissions. Considering the much amount of nation's GHG emissions and growing nation's position in the world, GHG emissions in Korea should be reduced in near future. The CO$_2$ emissions from two sub-sections of energy sector in Korea, such as thermal power plant and industry section(including manufacturing and construction industries), was about 300 million metric tons in 2004 and this is 53.3% of total GHG emissions in Korea. So, the mitigation of CO$_2$ emissions in these two section is more important and more effective to reduce the nation's total GHGs than any other fields. In addition, these two section have high potential to qualitatively and effectively apply the CCS(Carbon Capture and Storage) technologies due to the nature of their process. There are several CCS technologies applied to these two section. In short term, the chemical absorption technology using amine as a absorbent could be the most effectively used. In middle or long term, pre-combustion technology equipped with ATR(Autothermal reforming), or MSR-$H_2$(Methane steam reformer with hydrogen separation membrane reactor) unit and oxyfuel combustion such as SOFC+GT(Solid oxide fuel cell-Gas turbine) process would be the promising technologies to reduce the CO$_2$ emissions in two areas. It is expected that these advanced CCS technologies can reduce the CO$_2$ avoidance cost to $US 8.5-43.5/tCO$_2$. Using the CCS technologies, if the CO$_2$ emissions from two sub-sections of energy sector could be reduced to even 10% of total emissions, the amount of 30 million metric tons of CO$_2$ could be mitigated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2005

We estimated the loadings of nitrogen and phosphorus flowing into Gwangyang Bay front river for monthly interval from April to December of 2003. We analyzed the concentrations of nitrogen and phosphorus in water and estimated the flowing rates of fresh water in 34 rivers. The amounts of water flowing into the Gwdngyang Bay from Sum-Jin River was 51-76％ in the total inflow of the river. The river water over 96％ of discharge was from Sumjin River, Dong River, Ju-Kyo River, Seo River and Shinkyum River. The flowing patterns of nitrogen and phosphorus into Gwangyang Bay were similar to the flowing of river. The nitrogen and phosphorus loadings into the Bay were higher in July and August than in dry seasons. In particular, the concentrations of phosphorus were high in Namshu River, Deukyang River and Kilho River sewage during in dry seasons. The range of DIN and TN loadings from Sumjim River were 46-66％ and 36-64％, respectively. The loading of DIP and TP from Sumjim River were 2-55％ and 12-67％, respectively. These results show that the most efficient control of N. p flow into Gwangyang Bay is to restrain the inflows of N, p from Namshu River, Deukyang River and Kilho River and to restrain the flows of N, p from Dong River, Ju-Kyo River and industrial plant. The DIN/DIP atom ratio in river water was about 18 in July and August, while the ratio was more higher in dry seasons than July and August of rainy seasons. The TN/TP atom ratio in river water was about 7 in rainy seasons, while the ratios were higher than 100 in the other months of dry seasons.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1002-1007
• /
• 2012

The considerable portion of energy demand has been satisfied by the combustion of fossil fuel and the consequent $CO_2$ emission was considered as a main cause of global warming. As a technology option for $CO_2$ emission mitigation, absorption process has been used in $CO_2$ capture from large scale emission sources. To set up optimal operating parameters in $CO_2$ absorption and solvent regeneration units are important for the better performance of the whole $CO_2$ absorption plant. Optimal operating parameters are usually selected through a lot of actual operation data. However theoretical approach are also useful because the arbitrary change of process parameters often limited for the stability of process operation. In this paper, a theoretical approach based on vapor-liquid equilibrium was proposed to estimate optimal operating conditions of $CO_2$ absorption process. Two $CO_2$ absorption processes using 12 wt% aqueous $NH_3$ solution and 20 wt% aqueous MEA solution were investigated in this theoretical estimation of optimal operating conditions. The results showed that $CO_2$ loading of rich absorbent should be kept below 0.4 in case of 12 wt% aqueous $NH_3$ solution for $CO_2$ absorption but there was no limitation of $CO_2$ loading in case of 20 wt% aqueous MEA solution for $CO_2$ absorption. The optimal regeneration temperature was determined by theoretical approach based on $CO_2$ loadings of rich and lean absorbent, which determined to satisfy the amount of absorbed $CO_2$. The amount of heating medium at optimal regeneration temperature is also determined to meet the difference of $CO_2$ loading between rich and lean absorbent. It could be confirmed that the theoretical approach, which accurately estimate the optimal regeneration conditions of lab scale $CO_2$ absorption using 12 wt% aqueous $NH_3$ solution could estimate those of 20 wt% aqueous MEA solution and could be used for the design and operation of $CO_2$ absorption process using chemical absorbent.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2012

Carbon-dioxide capture and storage (CCS) process is consisted by capturing carbon-dioxide from large point source such as power plant and steel works, transporting and sequestrating captured $CO_2$ in a stable geological structure. During CCS process, it is inevitable of introducing impurities from combustion, capture and purification process into $CO_2$ stream. Impurities such as $SO_2$, $H_2O$, CO, $N_2$, Ar, $O_2$, $H_2$, can influence on process efficiency, capital expenditure, operation expense of CCS process. In this study, experimental apparatus is built to simulate the behavior of $CO_2$ transport under various impurity composition and process pressure condition. With this apparatus, $N_2$ impurity effect on $CO_2$ mixture transportation was experimentally evaluated. The result showed that as $N_2$ ratio increased pressure drop per mass flow and specific volume of $CO_2-N_2$ mixture also increased. In 120 and 100 bar condition the mixture was in single phase supercritical condition, and as $N_2$ ratio increased gradient of specific volume change and pressure drop per mass flow did not change largely compared to low pressure condition. In 70 bar condition the mixture phase changed from single phase liquid to single phase vapor through liquid-vapor two phase region, and it showed that the gradient of specific volume change and pressure drop per mass flow varied in each phase.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.463-470
• /
• 2012

As the advanced seeding technology through use of plug tray for good cultivation of seeds was propagated along with the expansion and development of horticultural industry, the use of bed soils as growing medium has recently been increased. In this study, the effects of the four clay minerals such as illite, phyllite, zeolite, and bentonite on the early growth of red pepper in the bed soil were investigated. Furthermore, proteome analysis for the leaf and stem samples of red pepper treated with only illite was performed. Of the seedling cultured, the healthy and regular size seeds were selected and cultivated in the pots, after they were treated with four clay minerals. The experiment was performed during the whole six weeks in the glasshouse of the Chungbuk National University. The growth lengths, fresh and dry weights of red pepper were significantly higher in the treatments of illite, phyllite, zeolite, and bentonite than in the control. In addition, the uptake of $K^+$, $Ca^{2+}$, and $Mg^{2+}$ were higher in the treatment of illite, phyllite, zeolite, and bentonite than in the control. The 2-DE patterns for the red pepper by the applications of illite, phyllite, zeolite, and bentonite were similar to each other. Therefore, compared to the samples of control, the proteome analysis for the samples of red pepper treated by only illite were performed. Proteome analysis for red pepper showed that plastid fructose-1, 6-bisphosphate aldolase class 1, aldolase, and glyceraldehydes 3-phosphate dehydrogenase, all of which were involved in the energy metabolism, were highly expressed in leaf tissue by illite treatment. In stem tissue, NAD-dependent formate dehydrogenase involved in energy metabolism, potassium transport protein, and GIA/RGA-like gibberellins response modulator were highly expressed. Based on the results obtained from the proteome analysis, it appears that the proteins specifically and differentially expressed on the illite treatment may be involved in the enhanced growth of red pepper. The identification of some proteins involved in the response of vegetable crops to the treatment of clay mineral can provide new insights that can lead to a better elucidation and understanding of mechanism on their molecular basis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1008-1017
• /
• 2005

The purpose of this study was to evaluate the Quantity and Quality of food and nutrient intake of preschool children. The subjects were 57 children aged 3 to 6 years in Gumi day-care centers. Total daily dietary intakes were calculated by weighing food consumed at the day-care centers taken together with dietary records by children's mothers for intakes at home. This survey was conducted during 3 days including week and weekend days. Diet Quality was assessed by NAR (Nutrient Adequacy Ratio), MAR (Mean Adequacy Ratio), food group pattern and DDS (Dietary Diversity Score). The daily food intake was 992.7g, the plant food intake $(68\%)$ was higher than animal food intake $(32\%)$. The daily energy intake was 1249.2 kcal $(85\%\;RDA)$ and protein 43.8g $(153.6\%\;RDA)$. Percentage of calcium, iron, and niacin consumed below $75\%$ of RDAs were $29.8\%,\;35.1\%\;and\;28.1\%$, respectively. Proportions of energy from carbohydrate, protein and fat were $61.0\%,\;14.1\%\;and\;25.5\%$, respectively. Calorie intake proportion of breakfast, lunch, dinner and snack were $15\%,\;20\%,\;19\%\;and\;46\%$, respectively. The NAR of Ca and Fe and MAR were 0.84, 0.85 and 0.92, respectively. Thirty-one point six percent of children consumed 5 food groups (GMFVDS=110111) per day. Persons who had higher DDSs correlated positively with NAR and MAR. As a result, dietary intake of preschool children partially showed a problem of over and under nutrition in Quantity or Quality. We hope that the result of this study could be helpful for developing the nutrition education program for the health and nutrition of preschool children.

• Clean Technology
• /
• v.22 no.2
• /
• pp.132-138
• /
• 2016

The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O₅/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2018

As the international Maritime Organization is tightening up the emission regulation vessel, many countries and companies are pushing ahead the LNG fuel as one of long term solution for emission problems of ship. as a study on the way to conduct business for LNG bunkering around the world, this study was analyzed in view-point of business models focused on major countries such as Japan, China, Singapore, Europe and United States. The results of this study are as follows. China first established a nation-centered LNG bunkering policy. And then, the state and the energy company have been cooperating and carrying on LNG bunkering business for LNG fueled ships. Some countries in Europe and United States are in the process of LNG bunkering business mainly with private company. To obtain cheaper LNG fuel than bunker-C, the private company has a business model of LNG bunkering on their own LNG fueled ships, while securing LNG with high price competitiveness through partnership with middle class operators such us LNG terminal and natural gas liquefaction plant. Also, the LNG bunkering business around the world is focused on private companies rather than public corporations, but it was going to be focused on large energy companies because the initial cost required to build LNG bunkering infrastructure. Three models (TOTE model, Shell model, ENGIE model) of LNG bun kering business are currently being developed. It has been found that the way in which LNG bunkering business is implemented by different countries is applied differently according to the enterprise and national policy.