• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.605-611
• /
• 2017

The structure of the actual detector was computed using the code of the PENELOPE. Using the standard mixed sources (450, 1,000 ml), compare the effectiveness of each energy according to various densities and height of the PENELOPE computer simulation, and calculate the effectiveness of the various environmental specimens and apply them to various environmental specimens to determine the lower limit. The values obtained by the obtained value were obtained by applying the obtained efficiency to the actual environmental specimens and obtaining the lower limit values. The density correction factor is 1.155 g of the density correction factor of $0.4g/cm^3$ (59.54keV), 1.153 (661 keV), $1.06g/cm^3$ 1.064 (1,836.04keV), 1.03, and 1.033. It was confirmed that the radioactivity concentration of environmental samples decreased as the amount of specimen was measured increases, and the MDA value decreased as time measured increases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.97-97
• /
• 2013

Recently, Cu2ZnSn(S,Se)4 (CZTSS), which is one of the In- and Ga- free absorber materials, has been attracted considerable attention as a new candidate for use as an absorber material in thin film solar cells. The CZTSS-based absorber material has outstanding characteristics such as band gap energy of 1.0 eV to 1.5 eV, high absorption coefficient on the order of 104 cm-1, and high theoretical conversion efficiency of 32.2% in thin film solar cells. Despite these promising characteristics, research into CZTSS based thin film solar cells is still incomprehensive and related reports are quite few compared to those for CIGS thin film solar cells, which show high efficiency of over 20%. I will briefly overview the recent technological development of CZTSS thin film solar cells and then introduce our research results mainly related to sputter based process. CZTSS thin film solar cells are prepared by sulfurization of stacked both metallic and sulfide precursors. Sulfurization process was performed in both furnace annealing system and rapid thermal processing system using S powder as well as 5% diluted H2S gas source at various annealing temperatures ranging from $520^{\circ}C$ to $580^{\circ}C$. Structural, optical, microstructural, and electrical properties of absorber layers were characterized using XRD, SEM, TEM, UV-Vis spectroscopy, Hall-measurement, TRPL, etc. The effects of processing parameters, such as composition ratio, sulfurization pressure, and sulfurization temperature on the properties of CZTSS absorber layers will be discussed in detail. CZTSS thin film solar cell fabricated using metallic precursors shows maximum cell efficiency of 6.9% with Jsc of 25.2 mA/cm2, Voc of 469 mV, and fill factor of 59.1% and CZTS thin film solar cell using sulfide precursors shows that of 4.5% with Jsc of 19.8 mA/cm2, Voc of 492 mV, and fill factor of 46.2%. In addition, other research activities in our lab related to the formation of CZTS absorber layers using solution based processes such as electro-deposition, chemical solution deposition, nano-particle formation will be introduced briefly.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.104-114
• /
• 2001

To investigate the effects of the addition of Nb and Sn on the recrystallization of Zr- Sn-Nb alloys, both Vickers micro-hardness test and TEP measurement were carried out on cold-worked specimens annealed at various temperatures from $300^{\circ}C$ to 75$0^{\circ}C$. The microstructures of heat treated specimens were analyzed by optical microscope, SEM, and TEM. The study of microhardness and microstructures showed that both recrystallization process and grain growth were retarded as the activation energy was increased by the addition of Nb and Sn. Especially, the addition of Sn was more effective on retarding recrystallization. Precipitates were formed more easily when Nb was added because the solubility of Nb into Zr is lower than that of Sn. However, the recrystallization process was affected more by Sn than Nb because the strain field formed by substitutional Sn repressed the dislocation movement. TEP was increased due to the decrease of electron scattering as recovery and recrystallization were proceeded and saturated when the recrystallization completed. However, when precipitates formed, TEP was increased because the decrease of solute concentration near the precipitates caused the decrease of electron scattering.

• Journal of Nutrition and Health
• /
• v.38 no.7
• /
• pp.533-543
• /
• 2005

The purpose of this study was to determine the iron status of preschool children in Ulsan, Korea. The study was con-ducted using 95 children aged 3 to 6 years by investigating the anthropometric indices and assessing the dietary intakes and biochemical analysis. A questionnaire for dietary intakes using 24-hr recall method were carried out by the mothers of the 95 subjects. And also a study was conducted to assess hematological and biochemical status of iron and prevalence of iron deficiency. The average height and weight were 105.4 $\pm$ 7.0 cm, 18.7 $\pm$ 3.2 kg in boys, 103.8 $\pm$ 6.7 cm, 17.6 $\pm$ 2.7 kg in girls. These were lower than the body growth standard values of Korean pediatrics. There was not a significant difference in both between boys and girls. For the daily nutrient intake, energy was 1201.5 $\pm$ 280.9 kcal (79.3$\%$RDA), protein was 63.8 $\pm$ 28.2 g (219.4$\%$RDA), iron was 11.9 $\pm$ 4.5 mg (133.2$\%$RDA). The iron nutritional status by hematological assay found that Hct was 34.7 $\pm$ 2.0 ($\%$), Hb was 12.0 $\pm$ 0.8 g/dl, RBC was 4.3 $\pm$ 0.3 ($10^6/{\mu}l$), MCV was 80.5 $\pm$ 3.0 fL, MCH was 27.8 $\pm$ 1.1 pg and MCHC was 34.6 $\pm$ 0.6 g/dl. The biochemical measurement of serum iron was 75.6 $\pm$ 30.3 ${\mu}g$/dl, TIBC was 320.3 $\pm$ 34.1 ${\mu}g$/dl, serum ferritin was 30.0 $\pm$ 14.8 ${\mu}g$/dl, Zinc-Protophor-phyrin (ZPP) was 32.7 $\pm$ 8.0 ${\mu}g$/dl, and ZPP/Heme was 71.1 $\pm$ 19.5 ($\mu$mole/mol heme). The prevalence with Hct, Hb, TS and serum ferritin less than cut-off value was $8.4\%,\;9.5\%,\;12.6\%$ and $4.4\%$ respectively. But the prevalence of iron deficiency estimated with ZPP and ZPP/Heme criteria were $25.3\%$ and $27.4\%$, and were higher than in case of any other indices. The prevalence of iron deficiency anemia ((low Hb (< 11.0 g/dl) and low serum ferritin (< 10 ${\mu}g$/L) or low TS (3-4 yews: < $12\%$, 5-6 years: < $14\%$)) was found in only one 3 year old girl. The prevalence of iron deficiency except Hct and Hb was the highest in 3 year group, but the prevalence by Hct and Hb was the highest in 5 year group. Iron deficiency and iron deficiency anemia do not seem to be a major public health problem in preschool children in Ulsan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.95-103
• /
• 1998

Acute and chronic responses to PCB toxicity of Neomysis awatschensis were studied by measurement of bioassay, growth, oxygen consumption and nitrogen excretion with concentrations of PCB at 10 and $20^{\circ}C$. 96 hr.-$LC_50$ at 10 and $20^{\circ}C$ were 28.7492 pub and 10.6742 pub, respectively. Survival rates during 60 days exposured to chronic PCB concentrations of 0.5 pub, 1.0 pub, 1.5 pub and 2,0 pub at $10^{\circ}C$ were $85\%,\;80\%,\;75\%$ and $75\%$, respectively and suwival rates at $20^{\circ}C$ $85\%,\;75\%,\;75\%$ and $65\%$, respectively. Average daily growth rate of N. awatschensis exposed to chronic PCB concentrations at $10^{\circ}C$ were 0.039 mm/day in control group and 0.036 mm/day at concentration of 2.0 ppb, while their rates at $20^{\circ}C$ showed 0.072 mm/day in central group and 0.039 mm/day at 2,0 ppb. The growth factors were some similarities between the chronic PCB concentrations, but intermolt periods were related to body size of mysids, temperature and PCB toxicity. Changes in oxygen consumption and nitrogen excretion rates during 60 days exposure to PCB toxicity showed higher in high groups of PCB concentrations. Assimilation and feeding rates of N. awatschensis fed Artemia sp. decreased with increase of PCB concentration at 10 and $20^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.94-102
• /
• 1991

This study was directed to further clarify the effect of resting time or dietary condition for the improvement of exercise capacity and physical fitness, and the changes of some body consitiuents and physiological functions which are related to the exercise metabolism. Sixteen male students(8 athletes and 8 nonathletes)were participated during 3 weeks(Aug. 20-Sep.9, 1989). Each subject performed two treadmill running trials at an absolute intensity (1 mintute in 3.4mph/15% slope and 2 minutes in 5.5mph/20% slope). In the resting time trials, general diet was fed before 1, 2, 4 and 12 hours of the treadmill exercise loaded. in the dietary condition trials, high carbohydrate(HC), high fat(HF) and high protein(HP) diet were fed before 2 hours of the treadmill exercise loaded. Control trial was that of resting time before treadmill exercise loaded after 12 hours of general diet feeding. Measurement were made to study the change of blood glucose, palmitate, lactate, blood pressure and heart rate. The results obtained are summarized as follows: Mean daily metabolizable period. In resting time trial, the blood glucose concentration of athlete and nonathlete from 2 hours group was similar to control group. The blood palmitate concentration of athlete was increased in 1 and 2 hours group but those of nonathlete was not only increased in 1 and2 hours group but was more increased in 12 hours group, compared with both control group. The blood lactate concentration was increased in all experimental group, compared with both control group and those of nonathlete was much higher than athlets. The elevation rate of blood pressure in pre-and after-exercise of athlete was lower than those of nonathlete. In dietary composition trial, the blood glucose concentration of athlete and nonathlete in HC group was higher than other diet groups. The blood lactate concentration of athlete and nonathlete in HC group was lower than other diet groups. There was no remarkable change of the blood palmitate concentration and heart rate in each dietary composition trial, but those of nonathlete was low in HC and high in HP group. In above results, it was suggested that the effective condition of resting time and dietary composition for the improvement of exercise capacity of nonathlete may be 2 hours and HC diet, respectively. But it was showed that the exercise capacity of athlete may not be affected by experimental condition of resting time, except 1 hour after feeding or of dietary composition because of well adaptation in new exercise condition.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.213-226
• /
• 2003

The cure and rheological behavior of diglycidyl ether of bisphenol F/nadic methyl anhydride resin system with the kinds of imidazole were studied using a differential scanning calorimeter (DSC) and a rotational rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/ anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at $20{\sim}40 %$ of the reaction. The rate constants ($k_1,\;k_2$) showed temperature dependance, but reaction order did not. The reaction order (m+n) was calculated to be close to 3. There are two reaction mechanisms with the kinds oi catalyst. The gel time was determined by using G'-G" crossover method, and the activation energy was obtained from this results. From measurement of rheological properties it was found that the logarithmic 1:elation time of fused silica filled DBEBF epoxy compounds linearly increased with the content of filler and decreased with temperature. The highly filled epoxy compounds showed typical pseudoplastic behavior, and the viscosity of those decreased with increasing maximum packing ratio.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.33 no.1
• /
• pp.86-103
• /
• 2020

Objectives: The purpose of this study is to analyse the domestic trends of Traditional Korean Medicine on Hot flush in menopausal women. Methods: We searched six databases and selected relevant papers according to the criteria. Results: 12 papers included case report, literature review, randomized controlled clinical trials (RCTs), Non-RCTs, and retrospective chart analysis study design. 1. The daily diary, Kupperman's Index, Menopause Rating Scale, Menopause-specific Quality of Life Questionnaire, Digital Infrared Thermographic Imaging were used as a measure of the symptoms of hot flush. 2. There were significant correlations between Thermographic images, Pulse energy, Lifestyle Habits, Low frequency power/High frequency power (LF/HF) ratio and certain items of Menopausal Symptoms Measurement. 3. The case report using Er-Xian decoction and Hwangryunhaedoktang-Gamibang showed significant effect. 4. Domestic RCT studies using herbal or acupuncture treatments showed a significant value of 3.4 on average in the quality assessment conducted in the study. However, the number of domestic studies included was five, which is not enough compared to foreign countries. Conclusions: This study examined domestic research trends on hot flushes of menopausal women and found that various evaluation tools and diagnostic methods were applied. It is necessary to conduct various RCT studies in Korea, where the number of studies is insufficient compared to overseas.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.505-515
• /
• 2021

In this study, we evaluated the slope stability of the Pohang Daljeon-ri columnar joint (Natural Monuments # 415) and calculated the maximum energy, jumping height and moving distance of rockfalls using a simulation. Based on the results, we established the range of rockfall risk. The slopes of the Pohang Daljeon-ri columnar joint have dip directions of 93.79°, 131.99°, 165.54° and 259.84° from left (SW) to right (NE). Furthermore, they have a fan-like shape. The Pohang Daljeon-ri columnar joints are divided into four sections depending on the dip direction. The measurement results of the discontinuous face show that zone 1 is 125, zone 2 is 261, zone 3 is 262, zone 4 is 43. The results of slope stability analyses for each section using a stereographic projection method correspond to the range of planar and toppling failure. Although it is difficult to diagnose the type of failure, risk evaluation of currently falling rocks requires further focus. The maximum movement distance of a rockfall in the simulation was approximately 66 m and the rockfall risk range was the entire area under slope. In addition, it is difficult to forecast where a rock will fall as it rolls in various directions due to topographic factors. Thus, the installation of measures to prevent falling is suggested to secure the stability based on the results of the rockfall simulations and its probabilistic analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.50-63
• /
• 2021

Microcephalic osteodysplastic primordial dwarfism type II (MOPD II) is an autosomal recessive inherited disorder form of primordial dwarfism, caused by mutations in the pericentrin gene. The purpose of the study was to examine the clinical and radiological features, physicochemical properties and microstructures of the tooth affected with MOPD II. The mandibular 2nd molar was collected from the MOPD II patient. Micro-computerized tomography, scanning electron microscopy, energy dispersive spectrometry and Vickers microhardness analysis were performed on the MOPD II and the normal control. The morphology of the MOPD II tooth appeared to have malformed pulp and root and showed a small size. The mineral density measurement showed that the MOPD II tooth had similar scores in the enamel, but lower scores in the root 1/2 and apical dentin compared to the normal control. The microhardness values were smaller in the cusp enamel, root 1/2 dentin and apical dentin of the MOPD II compared to the normal control. In this study, the dental characteristics and the physicochemical properties of a tooth affected with MOPD II were analyzed to improve understanding of the oral manifestations of the disease and to assist in proper dental treatment by identifying precautions.