• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.645-654
• /
• 2019

In this paper, a new high step up DC/DC converter with a modified super-lift technique is presented. The coupled inductor technique is combined with the super-lift technique to provide a tenfold or more voltage gain with a proper duty cycle and a low turn ratio. Due to a high conversion ratio, the voltage stress on the semiconductor devices is reduced. As a result, low voltage ultra-fast recovery diodes and low on resistance MOSFET can be used, which improves the reverse recovery problems and conduction losses. This converter employs a passive clamp circuit to recycle the energy stored in the leakage inductance. The proposed convertor features a high conversion ratio with a low turn ratio, low voltage stress, low reverse recovery losses, omission of the inrush currents of the switch capacitor loops, high efficiency, small volume and reduced cost. This converter is suitable for renewable energy applications. The operational principle and a steady-state analysis of the proposed converter are presented in details. A 200W, 30V input, 380V output laboratory prototype circuit is implemented to confirm the theoretical analysis.

• 터널과지하공간
• /
• 제32권6호
• /
• pp.386-396
• /
• 2022

로드헤더에 미치는 변수의 영향력을 분석하기 위해 픽커터 절삭시험 관련 참고문헌들을 조사하였고, 수록된 데이터들을 수집하였다. 입력 인자는 일축압축강도, 절삭 깊이, 절삭 간격, 받음각, 비틀림각, 출력 인자는 비에너지, 절삭력, 수직력으로 결정했다. 입력 인자와 출력 인자로 분류 후 실험계획법을 작성하였고 분산분석을 이용해 변수들에 대한 기여도를 조사하였다. 그 결과, 절삭력과 비에너지에 가장 큰 영향을 미치는 요인은 일축압축강도와 절삭 간격으로 분석되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2508-2511
• /
• 1999

A non-contact battery charger which transfers energy using magnetic field without any electrical contacts is designed using half-bridge series resonant converter. This converter utilizes series resonance to reduce the undesirable effect of large leakage inductance of the non-contact transformer and ZVS operation can reduce switching losses. In this paper. analysis and design procedure of half-bridge series resonant converter with non-contact transformer is presented. Input voltage is 85VAC ${\sim}$ 270VAC, output voltage and current is 4.1V and 800mA, respectively. Furthermore, a method for calculating the secondary current of the transformer to control battery charging current in constant current charging mode which is required for litium-ion battery is proposed and the performance is verified from experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1009-1011
• /
• 1998

This paper presents a design of network and database structure of the integrated system for power system operational planning and analysis that will be more economical and stable of power system operation. An alias of this system is Highly Integrated Total Energy System(HITES). The Client/server model of HITES is designed as a remote data management model. The input/output-type of application programs and Oracle server is standardized. The separated user-databases from main-database strengthen security of HITES. It is plan to do that tables and relationships are defined by database designs. The connection of application program and DBMS of HITES will be tested through database design and data construction.

• KIEAE Journal
• /
• 제11권2호
• /
• pp.45-57
• /
• 2011

As climate change and environmental degradation become more evident, the public's concern and knowledge on sustainable development requires planners to have regards to social impacts and long term economic viability, as well as environmental impacts. The main objective of this study is to analyze existing sustainability assessment tools for single detached houses. The most widely used oversea tools are selected. From analysis on the existing assessment tools, "Impact Estimator" by Athena Institute, "Bees 4.0" by NIST, "CASBEE for Home" by JSBC, "Envest for Housing" by Energy Saving Trust, "LISA" by Center for Sustainable Technology, "SBTool" by iiSBE (International Initiative for Sustainable Built Environment), it can be seen that the current sustainability assessment programs are in need of much improvement. The selected programs are analyzed on scope of program setting & running, data input & output, assessment categories, and strength & weakness. This study is to supplement the existing sustainability assessment tools for single detached houses, and provide information for the development of web-based program to assist architects or home owners to plan sustainable houses in Korea in the schematic design stage.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.53-66
• /
• 1995

현재 사용중인 Non-LOCA 해석용 인허가 코드들은 특정한 형태의 가압경수로에 맞게 짜여진 것들이어서 모든 형태의 가압 경수로에 적용할 수 있는 범용 코드의 개발이 필요한 실정이다. 이를 위하여 한국원자력연구소에서는 웨스팅하우스 및 CE형 발전소에 공히 적용할 수 있는 과도현상 해석 코드인 TASS 로드를 개발하고있다. 이 TASS 코드는 실시 간 보다 빠르게 핵증기계통에 대한 모의 계산을 수행하며 대화식의 입출력을 통하여 사용자가 원하는 과도현상을 정확히 모사할 수 있다. 본 논문에서는 웨스팅하우스형 발전소에 대하여 TASS 코드를 적용하여 Non-LOCA 인허가 해석을 하기 위한 검증을 위해, 교류 전원 상실사고와 부하상실사고에 대하여 발전소 실측자료와의 비교계산을 수행하였고 주급수관 파단사고, 펌프축 고착사고, 증기발생기 세관 파열사고 및 주증기관 파단사고들에 대하여 대형코드인 RELAP5 /MOD3 코드와의 비교계산을 수행하였다.

• 상하수도학회지
• /
• 제29권2호
• /
• pp.171-182
• /
• 2015

The economic effects of sewage and wastewater treatment service (SWTS) sector on other sectors have been rarely investigated in the literature. This paper attempts to apply an inter-industry analysis to looking into the economic effects of the SWTS sector. To this end, the most recently published 2012 input-output table is used here. In particular, the SWTS sector is specified as exogeneous to identify the economic effects of the SWTS sector on other sectors. Production-inducing effect, value-added creation effect, and employment-inducing effect are quantified based on demand-driven model. Supply shortage effect and price pervasive effect are also analyzed employing supply-driven model and Leontief price model, respectively. The results show that production-inducing effect and value-added creation effect of a unit of investment or production in SWTS sector are estimated to be 1.7076 and 0.7392, respectively. The employment-inducing effect of one billion of investment or production in the SWTS sector is computed to be 11.0498 persons. The shortage effect of the SWTS sector amounts to 0.8417 won. The overall price effect of the 10% increase in the price of SWTS sector is calculated to be 0.0115%. This quantitative information can be utilized in predicting the economic effects of the SWTS sector-related activities or policy-making.

• Journal of Radiation Protection and Research
• /
• 제16권2호
• /
• pp.41-54
• /
• 1991

라돈 및 붕괴생성물의 호흡에 의한 인체 피폭선량의 제어가능성을 찾기 위해 다음과 같은 과정을 거쳤다. 1) 라돈에 관련된 기존모델을 토양 기공모델, 실내붕괴 모델, 폐선량계산모델로 분류해석하고, 2) topology이론에 따라 물리유추개념으로써 회로망으로 전환하여, 라돈환경계통을 정식화, 검증계산을 거쳐, 3) 모의계산으로 선량감도를 분석하여 최적 매개변수의 범위를 모색하였다. 매개변수인 환기율, 침적율, 부착율가 제어범위내 변화될 때, 정식화된 111원 연립방정식의 해를 구하여 선량감도를 분석하였으며, 제어매개변수의 선량감도에 의한 효과를 3차원으로 도식화하였다. 본 연구 수행결과, 제어매개변수 변화에 따른 실내의 $^{222}Rn$ 및 Rn-D의 농도 변화과정은 새롭게 해석할 수 있는 벡터감도단층모형으로, 일부 제어매개변수의 조합변화에 따른 선량감도는 3차원 그래프모형으로 나타낼 수 있었다. 선량감도의 3차원 그래프에서는 실내환경의 대표적 매개변수 값 범위에서 변곡점이 나타났으며, 일반적으로 높은 환기조건$(>1h^{-1})$하에서는 공기정화에 의하여 선량이 전반적으로 증가되나, 불충분한 환기조건$(<0.5h^{-1})$하에서는 공기정화에 의하여, 선량이 40%정도로 감소되는 것으로 나타났다 (* 라돈 및 붕괴생성물은 이하 $^{222}Rn$ 및 Rn-D로 통일한다.)

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.22-28
• /
• 2010

Approximate analysis for a building installed with a friction damper is performed to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor(DMF). It is found out that DMF is dependent on friction force ratio and resonance frequency. Approximation of DMF and equivalent damping ratio of a friction damper is proposed with such assumption that the building with a friction damper shows harmonic steady-state response and narrow banded response behavior near resonance frequency. Linear transfer function from input external force to output building displacement is suggested from the simplified DMF equation. Root mean square of a building displacement is derived under earthquake-like random excitation. Finally, design procedure of a friction damper is proposed by finding friction force corresponding to target control ratio. Numerical analysis is carried out to verify the proposed design procedure.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.315-320
• /
• 2009

Thermoeconomics or exergoeconomics can be classified into the three fields of cost estimating, cost optimization, and internal cost analysis. The objective of cost estimating is to estimate each unit cost of product and allocate each cost flow of product such as electricity or hot water. The objective of optimization is to minimize the input costs of capital and energy resource or maximize the output costs of products under the given constraints. The objective of internal cost analysis is to find out the cost formation process and calculate the amount of cost flow at each state, each component, and overall system. In this study, a new thermoeconomic methodology was proposed in the three fields. The proposed methodology is very simple and obvious. That is, the equation is only each one, and there are no auxiliary equations. Any energy including enthalpy and exergy can be applied and evaluated by this equation. As a new field, the cost allocation methodology on cool air or hot air produced from an air-condition system was proposed. Extending this concept, the proposed methodology can be applied to any complex system.