• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.47-54
• /
• 2020

The acupressure is a treatment that applies pressure to certain parts of the body and has been mainly used for pain relief in the field of oriental medicine. However, the treatment effect is often different depending on the practitioner's ability, experience, and physical strength, so standardized acupressure is needed. In this regard, the equipment is being released, but this is mainly a rolling massage method, which reduces energy concentration and poses a risk of injury. Therefore, in this study, a device that provides vertical acupressure based on variable bogie (wheel truck) was implemented. As a result of experimenting with load and body pressure distribution and desirability to validate the device's bearing pressure, the acupressure rod held up to 150kg, the body pressure ratio was measured lower than the body pressure ratio of the comparison item in section 0%

• Journal of Environmental Health Sciences
• /
• v.47 no.4
• /
• pp.366-377
• /
• 2021

Background: Polycyclic aromatic hydrocarbons (PAHs) are generated in petrochemical complexes, can spread to residential areas and affect the health of residents. Although harmful PAHs are mainly present in particle phase, gas phase PAHs can generate stronger toxic substances through photochemical reaction. Therefore, the risk assessment for PAHs around the petrochemical complex should consider both particle and gas phase concentrations. Objectives: This study aimed to investigate the concentration characteristics of particle and gas phase PAHs by season in residential areas around petrochemical complexes, and to assess the risk of PAHs. Methods: Samples were collected for 7 days by seasons in 2014~2015 using a high volume air sampler. Particle and gas phase PAHs were sampled using quartz filter and polyurethane foam, respectively, analyzed by GC-MS. Chronic toxicity and probabilistic risk assessment were performed on 14 PAHs. For chronic toxicity risk assessment, inhalation unit risk was used. Monte-Carlo simulation was performed for probabilistic risk assessment using the mean and standard deviation of measured PAHs. Results: The concentration of particle total PAHs was highest in autumn. The gas phase concentration was highest in autumn. The average gas phase distribution ratio of low molecular weight PAHs composed of 2~3 benzene rings was 85%. The average of the medium molecular weight composed of 4 benzene rings was 53%, and the average of the high molecular weight composed of 5 or more benzene rings was 9%. In the chronic toxicity risk assessment, 7 of the 14 PAHs exceeded the excess carcinogenic risk of 1.00×10^-6. In the Monte-Carlo simulation, Benzo[a]pyrene had the highest probability of exceeding 1.00×10^-6, which was 100%. Conclusions: The concentration of PAHs in the residential area around the petrochemical complex exceeded the standard, and the excess carcinogenic risk was evaluated to be high. Therefore, it is necessary to manage the air environment around the petrochemical complex.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.270-288
• /
• 2021

We proposed a numerical method to simulate the hydro-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) in the paper. As a part of DECOVALEX-2023 Task G, we verified the method via benchmarks with analytical solutions. DECOVALEX-2023 Task G aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as a group of tetrahedral grains and calculated the interaction of the grains and their interfaces using 3DEC. The micro-parameters of the grains and interfaces were determined by a new methodology based on an equivalent continuum approach. In benchmark modeling, a single fracture embedded in the rock was examined for the effects of fracture inclination and roughness, the boundary stress condition and the applied pressure. The simulation results showed that the developed numerical model reasonably reproduced the fracture slip induced by boundary stress condition, the fracture opening induced by fluid injection, the stress distribution variation with fracture inclination, and the fracture roughness effect. In addition, the fracture displacements associated with the opening and slip showed good agreement with the analytical solutions. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.84-91
• /
• 2022

This study investigated the behavior of out-of-plane skewed moment connections that were designed as IMFs, as per the Korean standards. A total of 14 finite element models were constructed with the consideration of two types (single- and double-sided connections) and four levels of skew angle (0°, 10°, 20°, and 30°). The results indicated that the skewed connections considered in this study met the acceptance criteria for IMFs given by the codes. However, the load-carrying capacities of skewed connections were decreased as the skew angle increased. For the connection with a skew angle of 30°, the peak load was noted to be 13% less and the energy dissipation capacity could be 26% less than that of non-skewed connection. In addition, because of the skewed nature, the stress distribution in the skewed beam flange near the connection was asymmetric and the stresses were concentrated on the beam inner flange. Column twisting induced by the skewed configuration was very small and negligible in the beam and column combination considered in this study.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.50-60
• /
• 2022

The concentration levels and distribution characteristics of 16 polycyclic aromatic hydrocarbons (PAHs) were investigated and evaluated for total 100 soil samples as a part of the survey on soil contamination in Gwangju. The results (median and range) of T-PAHs (sum of 16 PAH concentrations), C-PAHs (sum of carcinogenic PAH concentrations) and T-TEQs (sum of 16 TEQ concentrations) were 20.8 (7.6~1158.1), 2.2 (N.D~509.6), and 0.3 (N.D~424.6) ㎍/kg, respectively. There was a positive correlation between C-PAHs/T-PAHs and T-TEQs/T-PAHs except one point where the concentration of benzo(a)pyrene was high. The ratios of the C-PAHs/T-PAHs were 31.7% for low molecular weight-PAHs and 68.3% for high molecular weight-PAHs, suggesting that PAHs generation mainly arose from combustion sources. The ratio of isomers of individual PAHs, Phe/Ant, Flu/Pyr, Ant/(Ant+Phe), Flu/(Flu+Pyr), and BaA/(BaA+Chr), also confirmed the predominance of PAHs from combustion activities. Statistical tracing of the source of PAHs through principal component analysis indicated that the main sources of combustion were automobile fuel and coal. The overall results of this study suggested HMW-PAHs, T-PAHs, C-PAHs and T-TEQs should be separately evaluated to better assess the toxicity and environmental behavior of individual PAHs.

• Journal of Marine Life Science
• /
• v.4 no.2
• /
• pp.53-62
• /
• 2019

Heterotrophic bacteria are a major member of the microbial loop in the marine ecosystem and play an important role in the biogeochemical cycle decomposing organic matter. Therefore study of bacterial variation is important to understand the material cycle and energy flow of marine ecosystems. We investigated the monthly variations of bacteria and environmental factors in the Youngsan River estuary, and the correlation between bacteria and phytoplankton biomass (chlorophyll-a) including size-structure. As a result, bacteria of the Youngsan River estuary were higher in the surface than in the bottom layer, and higher in the summer than in winter. And the closer to the dike, the abundance increased, and it increased to the peaks in August, September, and June 2019 at the station closest to the dike. The chlorophyll-a also increases at the stations and time when the bacterial abundance was high and they correlates positively displaying no difference between size fractions. The results indicate that organic matter derived from phytoplankton has an effect on bacterial variation but no size-dependent effects. In addition, the seasonal pattern of bacteria increasing in proportion to the water temperature suggests the effect of water temperature on the growth of bacteria. No association of bacterial abundance variation with nutrient supply due to freshwater input was observed. In this study, dissolved oxygen was depleted and hypoxia was observed for a short time when a strong stratification was not developed. This may be resulted from the supply of organic matter from phytoplankton and the consumption of oxygen due to bacterial decomposition.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.10-20
• /
• 2022

This article evaluated levels of Estimated Average Requirements (EARs), Reference Nutrient Intakes (RNIs), and Acceptable Macronutrient Distribution Ranges (AMDRs) of protein using the recently revised Dietary Reference Intakes (DRIs) for Koreans (2020). Dietary protein requirements are based on amounts sufficient to satisfy physiological demands to accomplish nitrogen equilibrium. The same principle was applied to estimate EARs and RNIs, for adults in DRIs conducted in 2015 and 2020 in Koreans. EAR was estimated to be 0.73 g/kg body weight/day, according to data (0.66 g/kg body weight/day) obtained using the nitrogen balance method and adjusted by efficiency of protein use (90%). RNI was calculated as EAR increased by an amount equal to twice the standard deviation of an age group so as to cover 97.5% of the group and was found to be 0.91 g/kg body weight/day. For weaned infants, children, and adolescents, growth requirement was added to estimate EAR. In particular, growth requirement was adjusted by efficiency of protein use in the revised EAR, which led to higher EARs for weaned infants, children, and adolescents of both genders as compared with 2015 DRIs. The AMDR for protein was set at 7%-20% of energy intake, which was the same as 2015 DRIs. Current, average protein intake by the Korean population is almost twice times the EAR, which suggests it might be better to increase the minimal margin for AMDR. However, it was not adjusted in this revision due to lack of evidence.

• Asia Marketing Journal
• /
• v.21 no.4
• /
• pp.25-43
• /
• 2020

Although ready meals have recently increased their market share in the Korean food industry, a literature review found that the use of ready meals triggers feelings of guilt in homemakers. Such guilt arises as a result of several factors apparently related to consumers' health. Consequently, levels of guilt might be expected to vary depending on consumers' perceived health locus. The present study aims to examine (a) how health locus affects guilty feelings about ready-meal consumption, (b) how the effect varies in relation to the consumption of different types of ready meal, and (c) the relationship between consumers' guilty feelings and willingness to buy ready meals. Three dimensions of health locus of control (HLC) -internal HLC (IHLC), powerful-others HLC (PHLC), and chance HLC (CHLC)- were presumed to influence consumers' feelings of guilt in association with ready meals. Data were collected via an online survey, and participants were randomly assigned to either of two groups: one group was instructed to heat meals in a microwave (ready-to-heat [RTH] group, n=104) and the other cooked using a pan with additional ingredients (ready-to-cook [RTC] group, n=101). The study found that guilty feelings about consuming RTH meals increased in line with increased external HLCs, namely, PHLC and CHLC. For the RTC group, guilt increased in line with increased PHLC. IHLC had no significant effect on guilty feelings in either group. Willingness to buy ready meals decreased for both groups as consumers' feelings of guilt increased. Even RTC meals, which require more time and energy in food preparation, did not reduce guilty feelings among consumers with higher PHLC. RTC meals are preferable for consumers with higher CHLC, since their sense of greater involvement in the cooking process alleviates their feelings of guilt. Cooking with already prepared and uncooked ingredients brought fun and joy, both for the participants and their significant others. This interpretation may be developed into a strategic plan by ready-meal producers to strengthen their marketing strategy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.4
• /
• pp.215-226
• /
• 2022

Significant efforts have been devoted to developing high-performance composite materials by emulating the structure of biological creatures with superior mechanical characteristics. Nacre has been one of the most sought-after natural structures due to its exceptional fracture toughness compared with the constituent materials. However, the effect of manipulating the nacre-like geometry on the impact performance has not been fully investigated thus far. In this study, composites of randomly manipulated nacreous geometry are numerically developed and the impact performance is analyzed. We develop an algorithm by which the planar area of platelets in the nacre-like design is randomly resized. Thereafter, the numerical models of nonuniform nacre-patterned multi-layer structures are developed and the drop-weight impact simulation is performed. The impact behaviors of the model are evaluated by using the ratio of absorbed energy, the von Mises stress distribution, and the impact force-time curve. Therefore, the effect of the geometric irregularity on the nacre-patterned design is elucidated. This insight can be efficiently utilized in establishing the optimum design of the nacre-patterned structure.

• Economic and Environmental Geology
• /
• v.55 no.1
• /
• pp.1-17
• /
• 2022

The mechanical and thermal properties of the rock masses can affect the performance associated with both the isolating and retarding capacities of radioactive materials within the deep geological disposal system for High-Level Radioactive Waste (HLW). In this study, the essential parameters for the site descriptive model (SDM) related to the rock mechanics and thermal properties of the HLW disposal facilities site were reviewed, and the technical background was explored through the cases of the preceding site descriptive models developed by SKB (Swedish Nuclear and Fuel Management Company), Sweden and Posiva, Finland. SKB and Posiva studied parameters essential for the investigation and evaluation of mechanical and thermal properties, and derived a rock mechanics site descriptive model for safety evaluation and construction of the HLW disposal facilities. The rock mechanics SDM includes the results obtained from investigation and evaluation of the strength and deformability of intact rocks, fractures, and fractured rock masses, as well as the geometry of large-scaled deformation zones, the small-scaled fracture network system, thermal properties of rocks, and the in situ stress distribution of the disposal site. In addition, the site descriptive model should provide the sensitivity analysis results for the input parameters, and present the results obtained from evaluation of uncertainty.