• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.32-44
• /
• 1995

I. 제 목 고에너지 X-선 소조사야의 선량분포 및 계측에 관한 연구 II. 연구의 목적 및 중요성 최근 수술이 어려운 뇌종양등에 대한 방사선수술법(Radiosurgery)이 관심의 대상이 되고 있다. 방사선수술법은 크게 나누어 200여개의 Co-60이 장착된 장치(Gamma Knife)를 이용하는 방법과, X-선치료기를 이용하는 방법은 몇개의 보조기구를 설치하면 가능한 매우 경제적인 방법이다. 따라서 Microtron을 이용한 방사선수술의 기초자료확보를 위하여 소조사야에 대한 선량과 선량분포의 측정 및 계산을 실시하였다. III. 연구의 내용 및 범위 Microtron으로부터 조사되는 6MV, 10MV, 21MV X-선의 지름 3cm이하 소조사야에 대한 정확한 선량 및 선량분포 자료를 확보하기 위해, 가. Microtron치료기와 보조장치등에 대한 정밀도 계측 및 평가 나. 보조 Collimator의 적당한 크기와 재료의 선택 및 설계, 제작. 다. 에너지와 조사야 크기 각각에 대한 여러측정장치(Ion chamber, Diode detector, TLD 및 Film등)를 이용한 선량 및 선량분포 측정. 라. 측정값들의 비교, 검토 및 측정된 자료에 의한 선량 및 선량분포의 계산을 수행했다. IV. 연구결과 및 활용에 대한 건의 본 연구에서 얻은 결과는 다음과 같다. 가. Microtron치료기와 보조장치등의 정확도의 허용 오차범위내에서 잘 일치하였다. 나. 보조 collimater adpator는 총 길이 24cm로 하였으며 재질로는 두랄미늄을 사용하였고, 보조 collimator는 low melting alloy를 사용하였으며 소조사야 크기의 정확도는 0.5mm이내에서 매우 잘 일치 하였다. 다. 방사선 수술법의 에너지 선택에 중요한 요소중의 하나인 penumbra는 6MV X-선에서 가장 적게 나타났으며 라. 소조사면에 대한 깊이-선량 백분율곡선은 모든 에너지에서 조사면이 작아질수록 표면으로 이동하는 경향을 보였다. 이상의 결과로부터 방사선 수술을 시행할 경우 수십억원에 이르는 장비의 도입이나 새로운 시설 없이 Microtron에서 조사되는 고에너지 X-선을 이용할 수 있을 것으로 사료된다. 또한 새로 구입한 측정기나 보조 Collimator를 이용하여 소조사야에 대한 선량측정기술을 습득함으로써 일반적인 소조사야의 방사선치료나 회전치료등에 활용할 수 있다.

• The Korean Journal of Physiology
• /
• v.10 no.1
• /
• pp.61-66
• /
• 1976

Rectal temperature, skin temperature and oxygen consumption were measured in five women divers during diving under two conditions a) wearing a cotton bathing suit and b) wearing a diving suit and the following results were obtained. 1. The duration of the diving period was 30 min with the cotton bathing suit whereas it was above 120 min with the diving suit. 2. The average rectal temperature fell to $34.5^{\circ}C$ after 30 min of diving with the cotton bathing suit. On the other hand, with the diving suit, immediately after submersion, the rectal temperature rose about $3^{\circ}C$ and remained at about $39^{\circ}C$ throughout the diving period of 120 min. 3. Average mean skin temperature during diving was $11^{\circ}C$ and $21^{\circ}C$ with cotton bathing suit and with the diving suit, respectively. The mean body temperature fell to $25^{\circ}C$ with the cotton bathing suit while it reached $32^{\circ}C$ with the diving suit at the end of each diving period. 4. Oxygen consumption during diving was three fold of the pre-dive level with the cotton bathing suit but it was two fold with the diving suit. 5. Total extra heat loss was 323 kcal during 120 min of diving with the diving suit. On the contrary, with the cotton bathing suit, it was 528 kcal for 30 min, These results may suggest that the prolongation of the diving period with the diving suit is primarily due to maintenance of core temperature at more or less physiological level as a result of reduction in conductive heat loss from the body surface to the water and the Preferential distribution of blood in the core area.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1041-1047
• /
• 2020

The intention of this paper is to give a better understanding about the implementation of sustainable manufacturing practice in the textile companies in Indonesia as one of the promising sectors in the manufacturing industry. The data was collected by taking a case study approach in one of the leading textile companies in Indonesia. Questionnaire and interview techniques were used to gather in-depth information about the implementation of a sustainable concept in the company. The result reveals that the extent of the implementation of Sustainable Manufacturing Practices (SMP) in the companies are at a level of moderate to high. From the three dimensions measured which are environment, economy, and social dimensions, the evaluation result shows good performance in terms of the implementation of sustainable concepts, like low level of gas emission, high percentage of renewable energy usage, cost reduction rate, high quality of life, etc. From this result, the authors then develop a sustainable manufacturing model in the wider coverage to be implemented not only in the textile industry but is expected to be implemented in manufacturing sectors as well. This model consists of at least seven basic archetypes which are divided into three dominant areas: technological innovation, economical, and social areas which aim to bring better performance in the manufacturing industry of Indonesia.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.33-39
• /
• 2006

Parameters including the seismic sources and the elastic wave propagation characteristics were analysed using the observed ground motions from 3 Kyoungju region earthquakes. The Levenberg-Marquardt algorithm was applied to invert all the variables non-linearly and simultaneously with S wave energy In frequency domain. Average stress drop of 3 events and local attenuation parameter ${\kappa}$ were estimated to about 48-bar and 0.0312 respectively. Regional attenuation parameter, Qo and ${\eta}$, were also estimated to be about 417 and 0.83. ${\kappa}$ values are much higher than that of EUS, even though smaller than that of WUS. All these values resultant from this study show that there are differences in some parameters of other studios due to differences in the governing equation. of acceleration motions

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.11-18
• /
• 2005

In this paper, we proposed a video watermarking algerian based on wavelet transform using statistical characteristic of video according to the energy distribution and the spread spectrum technique. In the proposed method, the original video is splitted by spatial difference metric and classified into the motion region and the motionless region according to the motion degree. The motion region is decomposed into 3-levels using 3D DWT and the motionless region is decomposed into 2-levels using 2D DWT The baseband of the wavelet-decomposed image is not utilized because of the image quality. So that the standard deviation of the highest subband coefficients except for the baseband is used to determine the threshold. Binary video watermarks preprocessed by the random permutation and the spread spectrum technique are embedded into selected coefficients. In computer experiments, the proposed algorithm was found to be more invisible and robust than the conventional algorithms.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.49-54
• /
• 2003

TiO₂nanoparticles were synthesized using the metallorganic chemical vapor deposition process. Particles with and without metal ion dopants were obtained. X-ray photoelectron and energy dispersive X-ray spectroscopic measurements confirmed the stoichiometry of the TiO₂nanoparticles. X-ray diffraction patterns showed a polycrystalline anatase structure of TiO₂. Transmission electron microscopy revealed that these particles are of nanoscale dimensions. Exact particle size and size distribution analyses were carried out by dynamic light scattering. The average particle size was determined to be 22 nm. The nanosize particles provided large surface area for photocatalysis and a large number of free surface-charge carriers, which are crucial for the enhancement of photocatalytic activity. To improve the photocatalytic activity, metal ions, including transition metal ions $(Pd^{2+},\;Pt^{4+},\;Fe^{3+})$ and lanthanide ion $(Nd^{3+})$ were added to pure TiO₂nanoparticles. The effects of dopants on photocatalytic kinetics were investigated by the degradation of 2-chlorophenol under an ultraviolet light source. The results showed that the TiO₂nanoparticles with the metal ion dopants have higher photocatalytic activity than undoped TiO₂. The $Nd^{3+}$ ion of these dopant metal ions showed the highest catalytic activity. The difference in the photocatalytic activity with different dopants is related to the different ionic radii of the dopants.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.483-486
• /
• 2005

The polymer concrete is drawing a strong interest as high-performance materials in the construction industry. Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. Also the recycling of PET in polymer concrete would help solve some of the solid waste problems posed by plastics and save energy. Polymer concrete beams using unsaturated polyester resins based on recycled polyethylene terephthalate (PET) plastic waste were used in our study for grasping its structural behavior of static and fatigue. As a result of static test, Compression stress distribution of Polymer concrete indicates linear behavior such as triangles. Although polymer concrete is high strength materials, its ductility capacity is excellent. From the fatigue test results, There was almost no difference on flexural characteristics between before and after fatigue loading. Therefore, recycled PET polymer concrete remains excellent structural ability after fatigue loading.

• Journal of Korean Elementary Science Education
• /
• v.33 no.3
• /
• pp.479-490
• /
• 2014

In this study, we investigated the characteristics of the reading materials in the elementary school science textbooks in order to obtain implications for the effective use of them. The reading materials in the elementary school science textbooks developed under the 7th and the 2007 revised National Science Curricula were analyzed. The criteria for classifying the reading materials were the type of theme, purpose, students' activity, the type of presentation, the type of images, the role of images, and readability. The results indicated that the reading materials in the 2007 revised science textbooks are more systematic than those in the 7th science textbooks in terms of their length and their distribution among energy, matter, life, and earth areas. It was also found that various types of reading materials are presented in the 2007 revised science textbooks covering new themes such as frontier science, job opportunity and career, and environment. In addition, the reading materials in the 2007 revised science textbooks introduce more visual images and the readability of them are also better than their counterpart. However, several limitations were still found to exist in the reading materials of the 2007 revised textbooks; most of them are non-inquiry and explanatory; most of the visual images are illustration and/or pictures. Educational implications are discussed.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.79-79
• /
• 2010

이 연구는 북한지역의 풍력 자원을 조사하기 위한 사전 연구로 30년간의 북한 지역의 27개 지상 관측소의 풍속 (고도 10 m)을 수집하였다. 이 풍속을 고도 50 m로 환산하였으며, 풍속의 확률밀도함수를 Weibull 함수로 가정하여 분석하였다. 30년 동안의 지상 관측 자료를 바탕으로 볼 때, 대체적으로 황해도 해안지역과 개마고원지역에서 평균 풍속이 북한 전역에서의 평균 풍속 4.0 m/s 보다 큰 지역이 나타났다. 따라서, 해안지역에서 바람 자원이 풍부함을 알 수 있었다. 지역의 차이는 있으나, 봄철 동안의 주풍은 북서풍과 남풍계열이 대등하게 나타나고 있으며, 여름은 남풍계열의 바람이 주풍으로 변하며, 가을과 겨울 동안 북서풍 계열이 주된 바람이었다. 고도 80 m 에서 풍속이 5 m/s 이상 지속되는 기간이 연간 30% 이상인 주요 6지점 중 장진을 제외한 나머지 네 곳은 해안에 위치함을 알 수 있다. 북한 지역 내륙의 중심부인 장진에서 연간 평균풍속 4.7 m/s 이상으로 관측 되었다. 이 지역은 개마고원 일대로 낭림산맥과 함경산맥의 두줄기가 만나는 곳으로 산맥에 의해 뒤쪽이 막혀있어 바람이 집중되어 높은 풍속을 나타낸 것으로 보인다. 또한 이 지역은 고원지대에 위치하여 북쪽에서 고도 1 km 이상에서 강하게 불어오는 북서풍의 영향으로 풍속이 높게 나타나는 것으로 보인다. 이 연구에서 사용한 관측자료는 단순히 지상의 풍속과 풍력으로만 분석한 것이므로 몇 가지 제약성을 가지고 있어 추후 보강이 필요하다. 관측지점의 지리적 위치나 주변의 환경에 따라 풍황의 변화가 크게 달라질 수 있으므로, 북한의 지형적인 요인을 고려한 정확한 실측을 통해 정확도를 높이는 풍력 자원 조사가 뒷받침 되어야 한다. 이 연구의 가치는 30년간의 바람 자료를 이용하였기 때문에 북한 지역에서의 풍황을 보는데 중요한 정성적 자료로 쓰여질 수 있으리라 본다. 또한, 이 자료를 바탕으로 풍력에너지 발전의 후보지 선정에 유용하게 활용되기를 기대하며, 더 나아가 두 나라 간에 에너지 교류가 활발히 이루어지기를 바란다.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

Nanocomposites of reduced graphene oxide and manganese (II,III) oxide can be synthesized by the freeze-drying process of the mixed colloidal suspension of graphene oxide and manganese oxide, and the subsequent heat-treatment. The calcined reduced graphene oxide-manganese (II,III) oxide nanocomposites are X-ray amorphous, suggesting the formation of homogeneous and disordered mixture without any phase separation. The reduction of graphene oxide to reduced graphene oxide upon the heat-treatment is evidenced by Fourier-transformed infrared spectroscopy. Field emission-scanning electronic microscopy and energy dispersive spectrometry clearly demonstrate the formation of porous structure by the house-of-cards type stacking of reduced graphene oxide nanosheets and the homogeneous distribution of manganese ions in the nanocomposites. According to Mn K-edge X-ray absorption spectroscopy, manganese ions in the calcined nanocomposites are stabilized in octahedral symmetry with mixed Mn oxidation state of Mn(II)/Mn(III). The present reduced graphene oxide-manganese oxide nanocomposites show characteristic pseudocapacitance behavior superior to the pristine manganese oxide, suggesting their applicability as electrode material for supercapacitors.