• Journal of Nutrition and Health
• /
• v.43 no.2
• /
• pp.114-122
• /
• 2010

Se and Fe are trace minerals acting as antioxidant scavenging free radicals. Iron deficiency is the most frequently reported nutritional deficiency in females. Body iron status are known to be dependent not only upon dietary iron intake, but also upon micro-mineral nutrition and obesity. Antioxidants such as selenium are reported to play an important role on the regulation of erythropoiesis by protecting RBC membrane from antioxidative damage. In this study, iron status in young females and its relationships with selenium status and physique were examined. Serum selenium and iron concentrations were measured by HANARO research reactor using neutron activation analysis method (NAA-method). The proportion with iron deficiency and anemia were 27.1% and 8.6%, respectively in young females, but the proportion with iron deficient anemia was 1.4%. The mean serum selenium level was $12.0\;{\mu}g/dL$ and in normal range in the young women. The study participants were tertiled according to BMI and serum selenium levels. Serum ferritin and iron levels inclined with increasing BMI tertiles. Serum iron and RBC count were higher in middle selenium group than low selenium group. Individuals had significantly lower hematocrit level in the lowest tertile for their serum selenium levels compared with the highest tertile. The serum ferritin level was predicted 25% by BMI and RBC count 26.2% by the serum selenium level and body fat%. In conclusion, this study shows that body iron status in young adult females are influenced by obesity and body selenium status.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.359-364
• /
• 2008

We have investigated optical and structural properties of $Al_{0.3}Ga_{0.7}N$/GaN and $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ heterostructures (HSs) grown by metal-organic chemical vapor deposition, by means of Hall measurement, high-resolution X-ray diffraction, and temperature- and excitation power-dependent photoluminescence (PL) spectroscopy. A strong GaN band edge emission and its longitudinal optical phonon replicas were observed for all the samples. At 10 K, a 2DEG-related PL peak located at ${\sim}\;3.445\;eV$ was observed for $Al_{0.3}Ga_{0.7}N$/GaN HS, while two 2DEG peaks at ${\sim}\;3.42$ and ${\sim}\;3.445\;eV$ were observed for $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS due to the additional $Al_{0.15}Ga_{0.85}N$ layers. Moreover, the emission intensity of the 2DEG peak was higher in $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS than in $Al_{0.3}Ga_{0.7}N$/GaN HS probably due to an effective confinement of the photo-excited holes by the additional $Al_{0.15}Ga_{0.85}N$ layers. The 2DEG-related emission intensity decreased with increasing temperature and disappeared at temperatures above 150 K. To investigate the origin of the new 2DEG peaks, the energy-band structure for multiple AlGaN/GaN HSs were simulated and compared with the experimental data. As a result, the observed high- and low-energy peaks of 2DEG can be attributed to the spatially-separated 2DEG emissions formed at different AlGaN/GaN heterointerfaces.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.557-574
• /
• 2020

The purpose of this study is to analyze the cause of high PM2.5 mass concentrations in Cheongju for the period of non-Asian dust days using the weather chart, the stream lines at 850 hPa, the backward trajectory, and the weather and air quality model. As a result of analyzing the time series of PM2.5 concentrations and weather charts for the episodic days in Cheongju, the weather patterns were shown in related to long-range transport of PM2.5 from China or surrounding areas. In fact, in the PM2.5 time series, 60-80 ㎍ m-3, which is more than 2-3 times higher than the concentration attributed to Cheongju activities, was observed as a background concentration related to long-range transport. The distribution of high PM2.5 concentration was typically dependent on the locations of the high and low pressures above the ground while the upper jet stream passed through the Korean Peninsula. Consequently, the high PM2.5 concentration in Cheongju is due to massive air pollutants in the form of smog originated from industrial, household and energy combustion sources of Beijing and other nearby regions of China. These air pollutants move along a fast zonal wind caused by the atmospheric pressure arrangement. high concentration of PM2.5 in Cheongju City is because the mass of air pollutants in the form of smog generated from industrial, household and energy combustion origins in Beijing or other nearby regions of China move along a fast wind speed zone according to the atmospheric pressure arrangement of long-distance transportation. Air pollutants including PM2.5 show an M-shaped pattern that passes through the topography of the Cheongju basin from north to south as a belt or band-shaped pollutant. The ground high pressure according to the above-ground high pressure expansion area and cut-off low or low pressure arrangement, or the bands in the form of river stems appear in a gradual incremental pattern that changes into a U-shape under the influence of the wind.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.79-105
• /
• 2023

Due to unprecedented extreme weather events such as global warming and climate change, many parts of the world suffer from severe pain, and economic losses are also snowballing. In order to address these problems, 'The Paris Agreement' was signed in 2016, and an intergovernmental consultative body was formed to keep the average temperature rise of the Earth below 1.5℃. Korea also declared 'Carbon Neutrality in 2050' to prevent climate catastrophe. In particular, it was found that the increase in temperature caused by greenhouse gas emissions hurts the environment and society as a whole, as well as the export-dependent economy of Korea. In addition, as the diversification of transportation types is accelerating, the change in means of choice is also increasing. As the development paradigm in the low-growth era changes to urban regeneration, interest in idle railway sites is rising due to reduced demand for routes, improvement of alignment, and relocation of urban railways. Meanwhile, it is possible to partially achieve the solar power generation goal of 'Renewable Energy 3020' by utilizing already developed but idle railway sites and take advantage of being free from environmental damage and resident acceptance issues surrounding the location; but the actual use and plan for these solar power facilities are still lacking. Therefore, in this study, using the big data provided by the Korea National Railway and the Renewable Energy Cloud Platform, we develop an algorithm to discover and analyze suitable idle sites where solar power generation facilities can be installed and identify potentially applicable areas considering conditions desired by users. By searching and deriving these idle but relevant sites, it is intended to devise a plan to save enormous costs for facilities or expansion in the early stages of development. This study uses various cluster analyses to develop an optimal algorithm that can derive solar power plant locations on idle railway sites and, as a result, suggests 202 'actively recommended areas.' These results would help decision-makers make rational decisions from the viewpoint of simultaneously considering the economy and the environment.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.215-235
• /
• 1996

The thermal analysis by mathematical model simulation makes it possible to reasonably predict heating and/or cooling requirements of certain greenhouses located under various geographical and climatic environment. It is another advantages of model simulation technique to be able to make it possible to select appropriate heating system, to set up energy utilization strategy, to schedule seasonal crop pattern, as well as to determine new greenhouse ranges. In this study, the control pattern for greenhouse microclimate is categorized as cooling and heating. Dynamic model was adopted to simulate heating requirements and/or energy conservation effectiveness such as energy saving by night-time thermal curtain, estimation of Heating Degree-Hours(HDH), long time prediction of greenhouse thermal behavior, etc. On the other hand, the cooling effects of ventilation, shading, and pad ||||&|||| fan system were partly analyzed by static model. By the experimental work with small size model greenhouse of 1.2m$\times$2.4m, it was found that cooling the greenhouse by spraying cold water directly on greenhouse cover surface or by recirculating cold water through heat exchangers would be effective in greenhouse summer cooling. The mathematical model developed for greenhouse model simulation is highly applicable because it can reflects various climatic factors like temperature, humidity, beam and diffuse solar radiation, wind velocity, etc. This model was closely verified by various weather data obtained through long period greenhouse experiment. Most of the materials relating with greenhouse heating or cooling components were obtained from model greenhouse simulated mathematically by using typical year(1987) data of Jinju Gyeongnam. But some of the materials relating with greenhouse cooling was obtained by performing model experiments which include analyzing cooling effect of water sprayed directly on greenhouse roof surface. The results are summarized as follows : 1. The heating requirements of model greenhouse were highly related with the minimum temperature set for given greenhouse. The setting temperature at night-time is much more influential on heating energy requirement than that at day-time. Therefore It is highly recommended that night- time setting temperature should be carefully determined and controlled. 2. The HDH data obtained by conventional method were estimated on the basis of considerably long term average weather temperature together with the standard base temperature(usually 18.3$^{\circ}C$). This kind of data can merely be used as a relative comparison criteria about heating load, but is not applicable in the calculation of greenhouse heating requirements because of the limited consideration of climatic factors and inappropriate base temperature. By comparing the HDM data with the results of simulation, it is found that the heating system design by HDH data will probably overshoot the actual heating requirement. 3. The energy saving effect of night-time thermal curtain as well as estimated heating requirement is found to be sensitively related with weather condition: Thermal curtain adopted for simulation showed high effectiveness in energy saving which amounts to more than 50% of annual heating requirement. 4. The ventilation performances doting warm seasons are mainly influenced by air exchange rate even though there are some variations depending on greenhouse structural difference, weather and cropping conditions. For air exchanges above 1 volume per minute, the reduction rate of temperature rise on both types of considered greenhouse becomes modest with the additional increase of ventilation capacity. Therefore the desirable ventilation capacity is assumed to be 1 air change per minute, which is the recommended ventilation rate in common greenhouse. 5. In glass covered greenhouse with full production, under clear weather of 50% RH, and continuous 1 air change per minute, the temperature drop in 50% shaded greenhouse and pad ＆ fan systemed greenhouse is 2.6$^{\circ}C$ and.6.1$^{\circ}C$ respectively. The temperature in control greenhouse under continuous air change at this time was 36.6$^{\circ}C$ which was 5.3$^{\circ}C$ above ambient temperature. As a result the greenhouse temperature can be maintained 3$^{\circ}C$ below ambient temperature. But when RH is 80%, it was impossible to drop greenhouse temperature below ambient temperature because possible temperature reduction by pad ||||&|||| fan system at this time is not more than 2.4$^{\circ}C$. 6. During 3 months of hot summer season if the greenhouse is assumed to be cooled only when greenhouse temperature rise above 27$^{\circ}C$, the relationship between RH of ambient air and greenhouse temperature drop($\Delta$T) was formulated as follows : $\Delta$T= -0.077RH＋7.7 7. Time dependent cooling effects performed by operation of each or combination of ventilation, 50% shading, pad ＆ fan of 80% efficiency, were continuously predicted for one typical summer day long. When the greenhouse was cooled only by 1 air change per minute, greenhouse air temperature was 5$^{\circ}C$ above outdoor temperature. Either method alone can not drop greenhouse air temperature below outdoor temperature even under the fully cropped situations. But when both systems were operated together, greenhouse air temperature can be controlled to about 2.0-2.3$^{\circ}C$ below ambient temperature. 8. When the cool water of 6.5-8.5$^{\circ}C$ was sprayed on greenhouse roof surface with the water flow rate of 1.3 liter/min per unit greenhouse floor area, greenhouse air temperature could be dropped down to 16.5-18.$0^{\circ}C$, whlch is about 1$0^{\circ}C$ below the ambient temperature of 26.5-28.$0^{\circ}C$ at that time. The most important thing in cooling greenhouse air effectively with water spray may be obtaining plenty of cool water source like ground water itself or cold water produced by heat-pump. Future work is focused on not only analyzing the feasibility of heat pump operation but also finding the relationships between greenhouse air temperature(T$_{g}$ ), spraying water temperature(T$_{w}$ ), water flow rate(Q), and ambient temperature(T$_{o}$).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2028-2042
• /
• 1994

Properly defining signal and noise in a self-organizing system like ART(Adaptive Resonance Theory) neural network model raises a number of subtle issues. Pattern context must enter the definition so that input features, treated as irrelevant noise when they are embedded in a given input pattern, may be treated as informative signals when they are embedded in a different input pattern. The ATR automatically self-scales their computational units to embody context and learning dependent definitions of a signal and noise and there is no problem in categorizing input pattern that have features similar in nature. However, when we have imput patterns that have features that are different in size and nature, the use of only one vigilance parameter is not enough to differentiate a signal from noise for a good categorization. For example, if the value fo vigilance parameter is large, then noise may be processed as an informative signal and unnecessary categories are generated: and if the value of vigilance parameter is small, an informative signal may be ignored and treated as noise. Hence it is no easy to achieve a good pattern categorization. To overcome such problems, a Coupled-ART neural network capable of modularized categorization of patterns is proposed. The Coupled-ART has two layer of tightly coupled modules. the upper and the lower. The lower layer processes the global features of a pattern and the structural features, separately in parallel. The upper layer combines the categorized outputs from the lower layer and categorizes the combined output, Hence, due to the modularized categorization of patterns, the Coupled-ART classifies patterns more efficiently than the ART1 model.

• Journal of Animal Science and Technology
• /
• v.55 no.4
• /
• pp.237-247
• /
• 2013

This study was to examine single or combined in vitro effects of environmental endocrine disruptors on boar sperm characteristics, oxidative stress damage in sperm and development of porcine IVF embryos. Addition of various concentration of NP (10, 20, $30{\mu}M$), DBP (10, 50, $100{\mu}M$) and BPA (1, 5 or $10{\mu}g/ml$) on boar sperm characteristics such as percentages of sperm motility, viability, membrane integrity and mitochondrial activity were dose-dependently decreased within 3, 6 or 9 hr incubation period (p<0.05). The overall detrimental effects increased with incubation time increasement. NP, DBP and BPA showed the detrimental effects on sperm membrane and mitochondria of energy production organelles affecting cell viability with the dependancy of dose and incubation time. In combination effects, NP ($10{\mu}M$) + DBP ($10{\mu}M$) significantly decreased boar general sperm characteristics for 3 or 6 hr incubation period compared with control (p<0.05). When both of NP and DBP concentrations (NP; $30{\mu}M$, DBP; $100{\mu}M$) increase, the detrimental effects on sperm characteristics were larger than those of low concentration combination (p<0.05). The inhibitory effects of NP ($30{\mu}M$) + BPA ($10{\mu}g/ml$) on sperm characteristics were larger than those of NP ($10{\mu}M$) + BPA ($1{\mu}g/ml$) (p<0.05). DBP ($100{\mu}M$) + BPA ($10{\mu}g/ml$) decreased sperm characteristics compared with the low concentration combination (DBP $10{\mu}M$ + BPA $1{\mu}g/ml$, p<0.05). This result indicates the detrimental effects of both chemicals on sperm characteristics were dose dependent. Addition of NP ($30{\mu}M$) + DBP ($100{\mu}M$), NP ($30{\mu}M$) + BPA ($10{\mu}g/ml$), DBP ($10{\mu}M$) + BPA ($1{\mu}g/ml$) or DBP ($100{\mu}M$) + BPA ($10{\mu}g/ml$) significantly increased lipid peroxidation for 3 or 6 hr incubation period (p<0.05) compared with no addition control. NP (${\geq}20{\mu}M$) decreased the percentages of IVF embryo development from morulae and blastocyst stages (p<0.05) and its detrimental effects were dose-dependant. BPA 0, 1, 5 or $10{\mu}g/ml$ decreased significantly and dose-dependently the percentage of morulae plus and blastocysts (p<0.05). Combinations of DBP ($100{\mu}M$) plus NP ($30{\mu}M$) and DBP ($100{\mu}M$) plus BPA ($10{\mu}g/ml$) did not affect on morulae and blastocyst development, but NP ($30{\mu}M$) plus BPA ($10{\mu}g/ml$) has significant detrimental effect on embryo development at these stages (p<0.05). These overall results indicate that the partial detrimental effects on boar sperm characteristics and embryo development by NP, DBP, BPA or the combination of these chemicals might be due to the increasement of lipid peroxidation and free radical formation in the cell and there were no specific interaction effects on boar sperm and embryo degeneration among the combined treatments.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.633-638
• /
• 2011

Mn substituted La, Sr or Ba-hexaaluminate were prepared by $(NH_4)_2CO_3$ co-precipitate method and calcined at $1,200^{\circ}C$ for 5 h. Catalysts were characterized by X-ray diffraction and $N_2$ physisorption and scanning electron microscope (SEM). Compared to $SrMnAl_{11}O_{19}$ and $BaMnAl_{11}O_{19}$, $LaMnAl_{11}O_{19}$ in which La located at mirror plane showed better crystallinity and high surface area, 13 $m^2/g$. $LaMnAl_{11}O_{19}$ revealed well developed plate-like structure which is characteristic structure of hexaaluminate. The catalytic activity of methane combustion increased in the following order: $LaMnAl_{11}O_{19}$ > $SrMnAl_{11}O_{19}$ > $BaMnAl_{11}O_{19}$ and was dependent on surface area of catalysts. 60 wt% $CeO_2/LaMnAl_{11}O_{19}$ calcined at $700^{\circ}C$ showed enhanced methane activity and methane was oxidized completely at low temperature ($700^{\circ}C$). It was confirmed that addition of ceria seems to be effective for the low and middle temperature combustion of methane. But, after calcination at high temperature of $1,200^{\circ}C$, it lost the promoting effect of ceria due to increase of ceria particle size and it had a limit to applying to the high temperature catalytic combustion.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.57-67
• /
• 2009

These studies were conducted to investigate the various dietary CP and ME feeding effect on productivity, blood composition and meat quality in cross bred chicks. Seven hundred twenty one day old cross bred chicks (Hanhyup Samho) were alloted to the floor pen for early starting (0~2 weeks), starting (3~5 weeks), growing (6~8 weeks), finishing period (9~10 weeks). Dietary ME and CP were 3,000, 3,100 kcal/kg, and 22% for early starting period, 19, 20, 21% for starting period, 18, 19, 20% for growing period, 17, 18, 19% for finishing period. Weight gain and feed consumption were weekly measured and feed conversion ratios were calculated. Blood and breast meat were collected at the end of experiment. Birds fed ME 3,100 kcal/kg diets improved significantly compared with others for the first two weeks (P<0.05). Feed conversion was statistically improved in CP (22)21% treatment relative to that of CP (22)20% from three to five weeks of age. No difference were found from 6 to 8 weeks of age. Weight gain and feed conversion also improved in ME 3,100 kcal/kg treatments, but feed intake decreased significantly in CP ($22{\times}21{\times}20$)19% treatment for the rest of experimental period (P<0.05). There was interaction between ME and CP for the first five weeks (P<0.05). Blood total protein showed higher in ME 3,100 kcal/kcal treatment than ME 3,000 kcal/kg (P<0.05). There were no differences in albumin, total cholesterol and glucose, but CP ($22{\times}20{\times}19$)18 treatment showed higher glucose than other treatments (P<0.05). Cooking loss, tenderness and water holding capacity were not different. However, pH was dependent on dietary ME, CP and existing the interaction between ME and CP treatments (P<0.05). As the results of this experiment, ME and CP were confirmed the 3,000 kcal/kg, 22% for the first two weeks 3,100 kcal/kg, 21% from three to five weeks of age, 3,100 kcal/kg, 18% for the growing period, 3,100 kcal/kg, 17% for the rest of period. However, further research would be required to confirm more optimum dietary nutrition for cross bred chicks.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2005

The performance of a novel fermentation process, adopting a sludge blanket type configuration for higher hydrolysis/acidogenesis of the municipal primary sludge, was investigated under batch and semi-continuous conditions with various pH and temperature conditions. This acid elutriation slurry reactor provided higher system performance with a short HRT (5 days) and higher acidogenic effluent quality under pH 9 and thermophilic ($55^{\circ}C$) conditions. The hydrolysis of the sludge was revealed to be significantly dependent on seasonal effects for sludge characteristics but with little impact on acidogenesis. Based on the rainy season at the optimum conditions, VFA production and recovery fraction ($VFA_{COD}/COD$) were $0.18\;g\;VFA_{COD}\;g^{-1}\;VSS_{COD}$ and 63%. As byproducts, nitrogen and phosphorus releasing were $0.006\;g\;N\;g^{-1}\;VSS_{COD}$ and $0.003\;g\;P\;g^{-1}\;VSS_{COD}$, respectively. For the mass balance in a full-scale plant($Q=158,880\;m^3\;day^{-1}$) based on the rainy season, the VFA and non-VFA(as COD) production were $3,110\;kg\;VFA_{COD}\;day^{-1}$ and $1,800\;kg\;COD\;day^{-1}$, resulting in an increase of organics of $31\;mg\;COD\;L^{-1}$ and $20\;mg\;VFA_{COD}\;L^{-1}$ and nutrients of $0.7\;mg\;N\;L^{-1}$ and $0.3\;mg\;P\;L^{-1}$ in the influent sewage. The economical benefit from this process application was estimated to be about $67 per $1,000m^3$ of sewage except for energy requirements and also, better benefits can be expected during the dry season. Also, the results revealed that the process has various additional advantages such as pathogen-free stabilized solids production, excellent solids control and economical benefits.