• Journal of Nutrition and Health
• /
• v.29 no.9
• /
• pp.1003-1012
• /
• 1996

We examined the relationship among riboflavin intake, work activity, erythrocyte glutathione reductase activity coefficient(EGR AC)and urinary riboflavin excretion. We also attempted to determine factors affecting seasonal riboflavin status of rural women. All information about nutrient intake, work activity and riboflavin biochemical status was repeatly collected in three seasons ; farming season(June), harvest season(October), nonfarming season(February). EGR AC was negatively correlated with riboflavin intake(P<0.005) and positively correlated with the duration(min) of farming activity(P<0.005) and the percentage of lean body mass(LBM) (%) representing long term physical activity(P<0.05) in harvestseason. Urinary riboflavin excretion was positively correlated with the ratio of riboflavin intake to 1,000kcal of energy expenditure (P<0.05) in farming season and negatively correlated with the duration(min) of farming activity (P<0.05) and crude nitrogen balance(P<0.005) in harvest season. It appeared that EGR AC seems to increase and urinary riboflavin excretion seems to decrease as work activity increase. Therefore work activity would be expected to deteriorate riboflavin status. Multiple regression analysis of variables showed that in general EGR AC was affected by riboflavin and energy intakes, energy expenditure, energy balance, the duration(min) of farming activity, LBM (%). Urinary riboflavin excretion was affected by riboflavin and protein intakes, LBM(kg) and crude nitrogen balance. Crude nitrogen balance affected urinary riboflavin excretion in all seasons. The result indicated that work activity as well as nutrient intake seemed to affect riboflavin status, especially EGR AC was affected preferentially be work activity in all seasons.

• Wind and Structures
• /
• v.8 no.2
• /
• pp.89-106
• /
• 2005

For estimating the vortex excited vibrations of overhead transmission lines, the Energy Balance Principle (EBP) is well established for spans damped near the ends. Although it involves radical simplifications, the method is known to give useful estimates of the maximum vibration levels. For very long spans, there often is the need for a large number of in-span fittings, such as in-span Stockbridge dampers, aircraft warning spheres etc. This adds complexity to the problem and makes the energy balance principle in its original form unsuitable. In this paper, a modified version of EBP is described taking into account in-span damping and in particular also aircraft warning spheres. In the first step the complex transcendental eigenvalue problem is solved for the conductor with in-span fittings. With the thus determined complex eigenvalues and eigenfunctions a modified energy balance principle is then used for scaling the amplitudes of vibrations at each resonance frequency. Bending strains are then estimated at the critical points of the conductor. The approach has been used by the authors for studying the influence of in-span Stockbridge dampers and aircraft warning spheres; and for optimizing their positions in the span. The modeling of the aircraft warning sphere is also described in some detail.

• Nutritional Sciences
• /
• v.4 no.1
• /
• pp.34-38
• /
• 2001

The purpose of this study was to compare the energy expenditure of normal-weight and overweight Korean middle-aged women (40-60 yr). Middle-aged oveweight ($BMI\;{\geq}\;25$, n= 20) and normal-weight women were ($BMI\;{\leq}\;23$, n = 20) were recruited in Seoul. Anthropometric measurements, body composition, energy intake, daily activity time, and energy costs of some daily activities were measured. Energy expenditure at rest and while reading the newspaper, washing dishes, mopping the floor, and walking on a treadmill at 1.0, 2.0, 3.5mph were measured by indirect calorimeter and total daily energy expenditure was estimated by summation of energy costs of different activities. The overweight group had significantly higher values of body weight, triceps skinfold thickness, thigh circumference, waist circumference, hip circumference, BMI, WTR, WHR, body surface area, percentage body fat, fat mass, fat free mass (FFM), and muscle mass compared to normal-weight group. The energy intakes of both groups were close to RDA and other nutrient intake status was also satisfactory. There were no significant differences in intakes of energy and nutrients between the two groups. Overweight subjects showed lower energy expenditure per kg body weight for reading the newspaper, washing dishes and mopping the floor, and walking on a treadmill at 2.0 and 3.5 mph, however, energy expenditure per kg FFM did not differ between the two groups. Daily energy expenditure for all activities was significantly higher in the overweight compared to the normal-weight group due to higher body weight. Both overweight and normal-weight groups showed negative energy balance between energy intake and energy expenditure, and there was no significant difference in energy balance between the two roups. Total daily energy expenditure correlated highly with FFM and body surface area. The result of present study does not offer an explanation on the energy imbalance and weight gain of overweight women.

• Journal of the Korean Society of Combustion
• /
• v.21 no.1
• /
• pp.18-30
• /
• 2016

Pyro-process of solids is the way to heat solid materials under high temperature. In this processing, energy efficient use is one of the main concerns due to its high energy consumption of bulk materials. To calculate the energy use of processes, heat & mass balance in simplified 0-dimensional model was performed. Energy calculation by this simplified model can lead to confusion due to simplification. Thus, it is necessary to understand considerations of energy analysis. In this study, cement manufacturing as a very common example of pyro-processing of solids, was introduced for explaining considerations of energy analysis for energy efficient use.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1447-1448
• /
• 2004

As the plants are classified as a bulk facility by the Agency's safeguards criteria, the Material Balance Evaluation is a good tool to timely detect diversion that will be accomplished through the creation of defects as small as bias defects. Through all evaluations made by the Agency, it Is strongly recommended to report SRD based on both weight and enrichment, maintain the reliable MUF declaration and improve the gamma spectrometry measurement procedure. These recommendations have been now applied and are going on.

• Earthquakes and Structures
• /
• v.13 no.2
• /
• pp.131-136
• /
• 2017

This paper concerns two new analytical approaches for solving high nonlinear vibration equations. Energy Balance method and Hamiltonian Approach are presented and successfully applied for nonlinear vibration equations. In these approaches, there is no need to use small parameters to solve and only with one iteration, high accurate results are reached. Numerical procedures are also presented to compare the results of analytical and numerical ones. It has been established that, the proposed approaches are in good agreement with numerical solutions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.4
• /
• pp.367-373
• /
• 1993

A 4-week energy balance study was conducted to estimate the energy expenditure (EE) of 7 high school age girl, 15 to 16 year age, by measurement of energy intakes and changes in body energy (BE) content (intake/balance technique), keeping their normal living pattern and eating behavior. Gross energy intake (GE) and fecal energy (FE) loss was measured by bomb calorimetry. Urinary energy (UE) loss was calculated from nitrogen excreted. Fat mass (FM) was determined from body density estimated from skinfold thickness. Mean constitutional ratio of carbohydrate, protein and fat for the total energy intake was 70.1$\pm$1.8%, 12.2$\pm$0.7% and 17.7$\pm$2.0%, respectively, Fecal energy loss was 2.8% proportion of the gross energy intake. Mean daily metabolizable energy estimated by subtract fecal and urinary energy loss was 2022 $\pm$ 50㎉. Total body energy change estimated from body composition change over 28days was increased 2400 $\pm$ 950㎉ . Mean daily energy expenditure was 1958$\pm$87㎉ (39$\pm$2㎉ /kg of body weight).

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.267-273
• /
• 2008

Energy efficiency and nutrient balance are good methods for environmental assessment of the environmentally-friendly agriculture. The objectives of this study were 1) to estimate the energy efficiency and nutrient balance of the organic rice farming, and 2) to suggest a solution to improvement the energy efficiency and nutrient balance. The set of estimation was performed at the organic rice farming area (8.9 ha) in Wanju-gun during the paddy cultivation period from 2006 to 2007. The organic farming complex consists of four weeding methods using 1) duck, 2) apple snail, 3) duck and apple snail and 4) hands and machinery. Results from this estimation should that the organic rice farming area was less efficient than conventional rice farming. The efficiency of organic farming area in 2006 was higher than in 2007. For the calculation of the nutrient balance, the N, P and K contents of input materials (cattle manure, milk vetch, mixed oilcake, rice bran, rice straw and barley straw) and output (farm products) were analysed. Annual environmental loads of N, $P_2O_5$ and $K_2O$ were estimated at 4.4 kg/10a, 13.8 kg/10a and 14.5 kg/10a, respectively. Cattle manure had the largest portion among the inputs items and nutrient concentration of cattle manure was high. Thus energy efficiency and nutrient balance depend on cattle manure input. Therefore it is necessary to control the manure input to improve the efficiency of organic rice farming.

• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.25-35
• /
• 2014

The objective of this study is to evaluate TOPLATS land surface model performance through comparison of results of water and energy balance analysis. The study area is selected Nakdong river basin and high resolution hydrometeorological components of which spatio-temporal resolution is 1 hr and 1 km are simulated during 2003 to 2013. The simulated daily and monthly depth of flows are well fitted with the observed one on Andong and Hapcheon dam basin. In results of diurnally analysis of energy components, change pattern throughout the day of net radiation, latent heat, sensible heat, and ground heat under energy balance analysis have higher accuracy than ones under water balance analysis at C3 and C4 sites. Especially, root mean square errors of net radiation and latent heat at C4 site are shown very low as 22.18 $W/m^2$ and 7.27 $W/m^2$, respectively. Mean soil moisture and evapotranspiration in summer and winter are simulated as 36.80%, 33.08% and 222.40 mm, 59.95 mm, respectively. From this result, when we need high resolution hydrometeorological components, energy balance analysis is more reasonable than water balance analysis. And this results will be used for monitor and forecast of weather disaster like flood and draught using spatial hydrometeorological information.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1618-1637
• /
• 2014

Clustering wireless sensor network is an efficient way to reduce the energy consumption of individual nodes in a cluster. In clustering, multihop routing techniques increase the load of the Cluster head near the sink. This unbalanced load on the Cluster head increases its energy consumption, thereby Cluster heads die faster and create an energy hole problem. In this paper, we propose an Energy Balancing Cluster Head (EBCH) in wireless sensor network. At First, we balance the intra cluster load among the cluster heads, which results in nonuniform distribution of nodes over an unequal cluster size. The load received by the Cluster head in the cluster distributes their traffic towards direct and multihop transmission based on the load distribution ratio. Also, we balance the energy consumption among the cluster heads to design an optimum load distribution ratio. Simulation result shows that this approach guarantees to increase the network lifetime, thereby balancing cluster head energy.