• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.162-169
• /
• 2012

Our country set the mid-term reduction goal of greenhouse gases up to 2020 in accordance with Bali roadmap agreed in 2007 through the negotiation with UNFCCC in 2009 and specified the proper goal as by the Basic Act on Green Growth that went into effect at April, 2010. First of all the enlargement of green building construction has been suggested as a worldwide strategy to achieve the green house gas reduction. Building area is one of most important sectors for the countermeasure of climate change agreement and the achievement of national green house gas reduction goal and the need to reduce its green house gases has been increased accordingly. The objective of the study is to examine the status and characterization of mass energy consumption local governmental buildings' green house gas emissions depending on usage (hotel, school, apartment, hospital) through the green house gas emission source unit analysis. The result indicated that the energy source unit was proportional to green house gas source unit and hotel showed the highest green house gas emission source unit per open area of construction unit, followed by hospital, apartment, and then school. In case of apartment, green house gas emission source unit per open area of construction unit decreased as year went on. Meanwhile school building showed a striking increase in the annual energy source unit.

• Environmental and Resource Economics Review
• /
• v.10 no.2
• /
• pp.135-159
• /
• 2001

This study analyses the energy consumption increase by using a physical production index (PPI) based decomposition method. The energy efficiency of the Korean industry deteriorated to a large extent in the 1992 to 1997 period. This outcome, however, does not contradict the result of a previous study that the physical energy intensities (measured by energy use per production unit) decreased in four Korean energy intensive industries such as steel, cement, petrochemical and pulp and paper in the same period. Although the physical energy intensities in four industries considered decreased significantly, the energy efficiency of the Korean industry deteriorated because the increase in the value-added production was smaller than that in the physical production except for the steel industry. This outcome suggests that the reduction in the physical energy intensity alone will not result in reducing the economic energy intensity, thereby reducing the increase in the energy consumption of the Korean industry. Therefore, it necessitates to restructure the Korean industry towards a higher value-added production and to strengthen energy efficiency improvement efforts in the Korean industry. As the overinvestment in the energy intensive industries caused a deep price fall of Korean products and a reduction of the value added of the Korean industry and with it an increase in the economic energy intensity, a decrease in this intensity will highly depend on reducing the overcapacity in the energy intensive industries which was partly responsible for the currency and economic crisis of 1997.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.89-94
• /
• 2009

The purpose of this study is to provide a fundamental data for reducing energy consumption and greenhouse gas emission of detached houses by investigating the energy consumption characteristic of detached houses in Daegu. Although the ratio of the detached houses decreases, the detached houses are common dwelling form next to apartments. Nevertheless the study about the energy consumption of detached houses has been insufficient compared apartments. There is a necessity which will investigate the energy consumption characteristic of detached houses. Because that with the building quality which is various form is different from apartments. This study investigate construction and equipment conditions and analyzing effective factors on energy consumption of detached houses. And this study draw up the energy consumption unit and emission factors unit for greenhouse gas of detached houses. This study represent a basic report for energy consumption reduction and helps effective use of energy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.973-979
• /
• 2004

The objectives of this study were to evaluate the digestible energy intake and energy expenditure in yearling horses on different training protocols (uphill- and level-track exercise training protocols). Twenty-four thoroughbred yearlings (12 males and 12 females, aged 27.0$\pm$0.9 months) were divided into two groups based on their training on two different tracks: the uphill (with a gradient of about 3%) training group (uphill training) and the level training group (level training). The digestible energy (DE) intake and energy expenditure (EE) during exercise were measured in both the groups. It was found that the DE intake in the uphill training and the level training groups was 5.1$\pm$3.1 and 36.9$\pm$4.8 Mcal/day, respectively. The EE during exercise in the two groups was 3.05$\pm$0.51 and 2.07 $\pm$0.56 Mcal, respectively. Thus, there was a significant difference in the EE (p<0.05), but not in the DE intake between the animals of the two training groups. The EE for a given intensity of exercise was greater in the uphill training group than in the level training group, but the DE intake was not affected by the exercise intensity. The DE intake was not generally affected by the intensity of exercise in this study, but a daily negative gain of body weight was observed in the uphill training group, particularly in the females. Thus, the energy requirement may be higher in yearlings undergoing uphill training than in those undergoing level training.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.585-600
• /
• 2011

South Korean central government has launched the first comprehensive climate change policies in 1999, and they have been renewed every three year. The third policies ended in 2007. However, it is quite rare to analyze whether the climate change policies are effective against climate change. In this context, this paper aims at analyzing the effectiveness of climate change policy which was launched for seven years from 1999 to 2007 in South Korea. The effectiveness analysis of policy can be done in terms of the individual policy and/or all policies being synthesized as a comprehensive unit. Employing the latter methodology, this paper analyzed the effectiveness on the basis of economic growth as independent variable, greenhouse gas emission as dependent variable, and energy use and its process as intervening variable. Seven analytic indicators covering the three variables were selected on the basis of two points in time before and after climate change policy having been launched. The seven indicators were analyzed in terms of three aspects. They were the change in the state of each indicator, the effectiveness of climate change policy from 1999 to 2007, and the effectiveness process from 1999 to 2007. The effectiveness process was analyzed in terms of the relational context and its flow processing path. Economic growth was advanced remarkably with increase in the total consumption of energy. As a result, greenhouse gas emission increased. However, energy efficiency increased with significant decrease in energy intensity, carbon intensity, and energy elasticity. The expansion of new and renewable energy over total energy supply was not effective significantly on the decrease in greenhouse gas emission. The processing path of climate change policy being effective advanced toward increase in energy efficiency through energy intensity rather than toward sustainable development. Such a way of the effectiveness of climate change policy implies that most policies focused on adaptation rather than on mitigation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1225-1230
• /
• 2016

Since a flash light produces enormous amount of photon energy in short time, not only electro-optic and infrared(EO/IR) systems utilized for Intelligence Surveillance Target Acquisition and reconnaissance(ISTAR) activities but also the people of a combat field can be severely influenced by a high flash light bursting in front of them. The people who bumped into a flash could not escape such enormous amount of photon energy, resulting in being blind temporarily or even permanently. In order to investigate the effect of a high flash source on a human eye, it is essential to know how much photon energy be incident into an eye from the flash source. In this paper, the model of irradiated photon energy to individuals from some flashes is proposed. The proposed irradiated photon energy per unit area of retina is based on taking the situation to be modeled as a simple EO system in front of a flash light. The validity of proposed model was proved by the application of the model to human on the surface of the earth with the well known light source, the Sun. The model of this study can be utilized to simulate the retinal intensity and energy of a flash for various conditions such as the illumination levels, the distance from a flash busting site, luminous intensity and time of a flash.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.417-431
• /
• 2020

In this study, a fundamental investigation was made on how to use LiDAR technology to determine the degree of weathering and alteration of rock mass. The purpose of the study was to identify the affecting parameters to LiDAR intensity and to quantitatively assess the relations among them through laboratory-scale experiment. A few potential affecting parameters were selected including scanning distance, incidence angle, surface roughness, surface color, mineral composition, and water saturation. In the experiment, FARO LiDAR unit was used for twelve different types of specimen. It was observed that the intensity was affected by, in the order of importance, surface color, incidence angle, scanning distance, property of rock, water condition, and surface roughness.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2011

Currently, there is database for per unit requirements of major construction materials in terms of energy consumption and $CO_2$ emission based on the input-output table published by the Bank of Korea in 2000, but no database for per unit requirements based on input-output tables was published in 2005 and 2007. The purpose of this study was to calculate the unit requirement values of major construction materials in terms of energy consumption and $CO_2$ emission generated by using the input-output tables published in 2005 and 2007. To estimate the unit requirement values, a database building method with the input-output tables was adopted by selecting 16 types of construction materials in wide use on construction sites. When the study results were compared with existing unit requirement values based on the input-output table of 2000, there were small discrepancies, from which it can be interpreted that the method used in the study is reasonable. Unit requirement values estimated based on input-output tables of 2005 and 2007 tended to decrease, and the highest value of energy consumption and $CO_2$ emission were found in the materials using cement and rebar.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.485-510
• /
• 2007

The purpose of this paper is to empirically analyze the economic effect of energy saving investment on the improvement of energy intensity. The data used in this paper are panel data, both time-series and cross-section data. In addition, eight manufacturing sectors has been divided into two groups: massive energy consuming (four industries) and non-massive energy consuming (four industries) ones and the time period of analysis is from 1982 to 2004. According to the empirical results, firstly, energy saving investment has a negative relationship with energy intensity, however, its effect is not high in terms of absolute volume of energy consuming. Secondly, in improving energy intensity of energy saving investment, its elasticity IS higher in non-massive energy consuming sector compared it with massive energy consuming sector. Thirdly, automation investment is also playing an important role in energy conservation. The elasticities of automation investment to energy intensity are larger than those of energy saving investment. In terms of the reduction of greenhouse gas per investment unit cost, however, energy saving investment has larger effect than automation investment.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2009

In this study, an equivalent unit load methodology has been presented to simplify the fatigue analysis procedure. And fuselage structure fatigue life has been evaluated based on equivalent unit load. Finite element analysis has been carried out to analyze the stress intensity factor and geometrical correction factor that is needed for crack growth analysis. And strain energy density factor is used to predict the initial direction of crack propagation.