• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1710-1718
• /
• 2016

The objective of this study was to evaluate the effects of supplements with different crude protein (CP) contents on grazing cattle intake, digestibility, ruminal fermentation pattern, and nitrogen (N) metabolism characteristics during the rainy season. Five ruminal and abomasal cannulated Holstein${\times}$Zebu steers (296 kg body weight, BW) were used in a $5{\times}5$ Latin square design. The animals grazed five signal grass paddocks (0.34 ha). The five treatments evaluated were: Control (no supplement) and 1.0 g of supplement/kg BW with 0, 330, 660, and 1,000 g of CP/kg as-fed. The supplement was composed of starch, soybean meal, urea, and ammonium sulphate. There was a positive linear effect ($p{\leq}0.033$) of the CP content in the supplements on the organic matter (OM), CP, and digested OM intakes. The provision of supplements did not increase ($p{\geq}0.158$), on average, total and ruminal digestibilities of OM and CP. However, the increase in CP content in the supplements caused a positive linear effect ($p{\leq}0.018$) on ruminal digestibilities of OM and CP. Additionally, a quadratic effect of the CP contents of the supplements were observed (p = 0.041) for the ruminal digestibility of neutral detergent fiber corrected for ash and protein, with the highest estimate obtained with the CP content of 670 g/kg. The supply of supplements increased (p<0.001) the ruminal ammonia N concentration, which also changed linearly and positively (p<0.001) according to increase in CP content in the supplements. The apparent N balance and relative N balance (g/g N intake) were not, on average, changed ($p{\geq}0.164$) by the supplements supply. However, both showed a tendency of a linear increase ($p{\leq}0.099$) with increasing supplement CP content. The supplements increased (p = 0.007) microbial N production in the rumen, which also changed linearly and positively (p = 0.016) with increasing supplement CP content. In conclusion, protein supplementation in grazing cattle during the rainy season, while stimulating voluntary forage intake, results in higher efficiency of N utilization when compared to energy supplementation. This is a possible response to increased microbial protein synthesis in the rumen and improved N status in the animal body.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.1
• /
• pp.65-72
• /
• 1992

Annual changes of nutrient intakes of Koreans and Japanese were compared on the basis of the data from the National Nutrition Survey which has been carried out annually in Korea (1969-1988) and in Japan (1950-1988) for the guide of the future food and nutrition policy. Intakes of all nutrients except carbohydrate and protein by Koreans were lower than those of Japanese in 1988. The intake of lipid by Koreans was less than one half of the intake by Japanese. The intake of protein has been increased to 79.2g in Korea and 91.6g in Japan, of which 49% and 52.6% were provided by the animal sources in Korea and Japan, respectively, in 1988. In terms of consumption of the energy nutrients, the percentage of carbohydrate has been decreased, while those of protein and lipid have been increased in both countries. In 1988, the ratios of energy intakes by carbohydrate, protein and lipid were 67 : 19 : 14 in Korea and 59 : 15 : 26 in Japan. Considering the desired ratio, 65 : 15 : 20, the intake of carbohydrate seems to be still high and that of lipid still low for Koreans. The food supply has been increased in both countries and the supply of animal food, oil and fat were greater in Japan than in Korea.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.136-141
• /
• 2010

The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.

• Clean Technology
• /
• v.22 no.4
• /
• pp.232-240
• /
• 2016

Recently, various research studies have been conducted and many are in progress for the suitable alternative materials for ITO based touch screen panel (TSP) due to limitations in size and flexibility. Various researches from all over the world have been attempted to fabricate the fine electrode less than $5{\mu}m$ for the rapid developing of display technology. Research is also being carried out in metal mesh methods using the existing technologies and alternative materials at commercial level. However, by using the existing technologies certain discrepancies are observed like low transparency and low yield which also results in the distortion of patterns. For repairing the damaged pattern, the conventional laser CVD technique has also been used but there are some challenges observed in CVD technique like achieving a stable fine electrode of $10{\mu}m$ or less and avoiding the formation of satellite drops. To overcome these issues, a new printing process named Electrohydrodynamic (EHD) printing, has been introduced by which $5{\mu}m$ fine patterns can be printed in one step. This EHDA printing technique has been applied to print very fine electrodes of $5{\mu}m$ or less by using conductive inks of various viscosities. This study also presents the optimized process parameters for printing $5{\mu}m$ fine electrode patterns during experiments by controlling the applied voltage and supply flow rate. The $5{\mu}m$ repair electrodes were fabricated for repairing $50{\mu}m$ shorted electrode samples.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.38-58
• /
• 2018

The ventilation system plays a crucial role in underground mine safety. The main objective of the ventilation system is to supply sufficient air to dilute the contaminated air at working places and consequently provide tenable environment during the normal operation, while it also should be capable of controlling the fire propagation and facilitate rescue conditions in case of fire in mines. In this study, a smoke control fan was developed for the auxiliary ventilation as well as the fire smoke exhaust. It works as a free-standing auxiliary fan without tubing to dilute or exhaust the contaminated air from the working places. At the same time, it can be employed to extract the fire smoke. This paper aims to examine the smoke control efficiency of the fan when combined with the current ventilation system in mines. A series of the site experiments and numerical simulations were made to evaluate the fan performance in blind entry development sites. The tracer gas method with SF6 was applied to investigate the contaminant behavior at the study sites. The results of the site study at a large-opening limestone mine were compared with the CFD analysis results with respect to the airflow pattern and the gas concentration. This study shows that in blind development entry, the most polluted and risky place, the smoke fan can exhaust toxic gases or fire smoke effectively if it is properly combined with an additional common auxiliary fan. The venturi effect for smoke exhaust from the blind entry was also observed by the numerical analysis. The overall smoke control efficiency was found to be dependent on the fan location and operating method.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.74-81
• /
• 2019

Expansion turbine system to recover the electricity energy from natural gas transmission stations is a well-known technique. The turbo-expander efficiency depends on the ratio of the natural gas flow rates to the design flow rate of the turbo-expander. However, if there is a big difference of the natural gas flow rate through the pressure letdown station because of seasonal supply pattern, that is, high flow rate in winter while low flow rate in summer, single turbo-expander system is not so efficient as to recover the pressurized energy from the low flow-rate natural gas. Therefore, we have proposed a new concept of double turbo-expander system: one is a big capacity and the other a small capacity. Here we have theoretically computed the electric powers at the pressure reduction from 18.5 bar to 7.5 bar depending on the inlet conditions of temperature and flow rate. The calculated electricity generation has been increased by 30% from 12.4 MW in a single turbo expander to 16.1 MW in the proposed double turbo-expander system when a minimal design efficiency of 0.72 is applied.

• Journal of Nutrition and Health
• /
• v.40 no.sup
• /
• pp.3-8
• /
• 2007

Sugars are a ubiquitous component of our food supply and are consumed as a naturally occurring component of many foods and as additions to foods during processing, preparation, or at the table. Most fruits and dairy products are high in sugars and thus naturally occurring sugars are consumed as part of a healthy diet. Some countries developed recommended daily intake figures(daily values : DVs or guideline daily amounts: GDA) for nutrients, and some countries, but not most have developed DV/GDA for total sugars. Dietary Reference Intakes for Koreans established by the Korean Nutrition Society in 2005, did not include the reference values for total sugar or added sugar. The committee on Dietary Reference Intakes for sugar was constituted in 2006 and discussed whether to special added sugars or total sugar. Although added sugars are not chemically or physiologically different from naturally occurring sugars, many foods and beverages that are major sources of added sugars have lower micronutrient densities compared with foods and beverages that are major sources of naturally occuring sugars. But it was so hard to calculate a dietary intake of added sugar for Korean people, because there was insufficient information about contents of added sugar during processing or preparation of Korean food. Currently Korean or US food labels contain information on total sugars per serving but do not distinguish between sugars naturally present in food and added sugars. Therefore the committee decided to set the reference value for total sugar for Koreans. According to the recommended diet pattern for Koreans suggested by the Korean Nutrition Society, estimated sugar intake from the sugar containing food based on 2,000 kilocalories is 67 g or 13% of total energy. Based on the data available on risk of obesity, hypertension, hyperlipidemia, insulin resistance, and metabolic syndrome from the analysis of Korean NHANES, it was insufficient evidence to set a UL for total sugar, but tended to increase serum LDL cholesterol and obesity at over 20-25% of energy from total sugar when consumed with high carbohydrates. Therefore the committee on Dietary Reference Intakes for sugar set the Acceptable Macronutrient Distribution Range for total sugar as 10-20% of total energy intake.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.993-998
• /
• 2014

Silver (Ag) grid patterned PET substrates were manufactured by thermal roll-imprinting methods. We coated highly conductive layer (HCL) as a supply electrode on the Ag grid patterned PET in the three kinds of conditions. One was no-HCL without conductive PEDOT:PSS on the Ag grid patterned PET substrate, another was thin-HCL coated with ~50 nm thickness of conductive PEDOT:PSS on the Ag grid PET, and the other was thick-HCL coated with ~95 nm thickness of conductive PEDOT:PSS. These three HCLs in order showed 73.8%, 71.9%, and 64.7% each in transmittance, while indicating $3.84{\Omega}/{\Box}$, $3.29{\Omega}/{\Box}$, and $2.65{\Omega}/{\Box}$ each in sheet resistance. Fabrication of organic solar cells (OSCs) with HCL Ag grid patterned PET substrates showed high power conversion efficiency (PCE) on the thin-HCL device. The thick-HCL device decreased efficiency due to low open circuit voltage ($V_{OC}$). And the Ag grid pattern device without HCL had the lowest energy efficiency caused by quite low short current density ($J_{SC}$).

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.44-48
• /
• 2001

In this study, we analyzed the $CH_4$and $C_4$$H_{10}$ sensitivity measurement and voltage variation using catalytic type gas sensor characteristics in catalytic combustion type gas detecter sensors. Gas detector shall operate as intended when exposed for 24 hours to air having a relative humidity of 65 percent at a temperature of $20^{\circ}c$ and humidity of 85 percent at a temperature of $40^{\circ}c$. The gas detecter sensors are to be subjected to operation for 210 days in an area that has been determined to be equivalent to a typical residential atmosphere with an air velocity of 50 cm/sec. The source of energy for a gas detector sensors employing a supplementary basic circuit is energized from a seperate source of supply direct applied voltage 2.1V, 2.2V, 2.3V. As a result, it was confirmed that the relative humidity and temperature by regression each analysis, compared to the isobutane characteristic graph and methane characteristic graph by a relative humidity of 65% and 85% at a temperature($20^{\circ}c$, $40^{\circ}c$) show a similar linear pattern on the whore.

• Journal of the Korean Dietetic Association
• /
• v.7 no.4
• /
• pp.426-438
• /
• 2001

Nutrient intake of Koreans from the 1999 Seasonal Nutrition Survey was somewhat lower than those of 1995 National Nutrition Survey or 1998 National Health and Nutrition Survey owing to the seasonal variation in amount and kind of foods eaten. In addition to the seasonal variation, low response rate of households which were surveyed twice was another reason for lower intake. Analysis of the major source of nutrients showed that intake of energy, carbohydrate, vitamin A and vitamin C was influenced by seasonal food supply pattern. And especially, vitamin A and vitamin C intake was more influenced by consumption of fruits and vegetables than other food groups. Main sources of these two nutrients were spinach and strawberry in spring, watermelon, tomato, melon and potato in summer, and grapes and pumpkin in autumn. As shown before in the report on food consumption, intake of beverages, drinks, fruits and vegetables was more influenced by season than others and these food groups affected the nutrient intake most. With the results of the 1998 National Health and Nutrition Survey, this study made it possible to estimate the average nutrient intake of the Korean population through out a year.