• 에너지공학
• /
• 제29권3호
• /
• pp.42-49
• /
• 2020

Precipitated Calcium Carbonate (PCC) can be utilized in energy-effective paper production. Limestone is a raw material for synthesizing PCC. Since the PCC production yield depends on the physicochemical properties of the limestone, a basic investigation of the raw limestone is required. This study provides a brief review of the origin of limestone, limestone distribution characteristics, and limestone deposits in Korea and Vietnam. Most limestones in Korea were formed in the Paleozoic era. On the other hand, limestones in Vietnam have various ages from the Precambrian to the Triassic. Limestone is the most largely produced mineral in Korea, but Vietnam has 5 times more amount of limestone reserves than Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.422-424
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitizedsolar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes $12\sim24$ hours. In this study, we varied the dye coloring temperature from $0^{\circ}C$ to $60^{\circ}C$. At the temperature of $40^{\circ}C$, DSC cell showed the best performance. We also expect the reduction of the time soaking in a dye. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}$ torr, RF power of 120W and substrate temperature of $100^{\circ}C$.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.479-482
• /
• 2015

The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.124-129
• /
• 2018

Methane is the cleanest fuel and supplies by many distributed type: liquefaction natural gas (LNG), compressed natural gas (CNG), and pipeline natural gas (PNG). Natural gas is mainly composed by methane and has been discovered in the oil and gas fields. Coal bed methane (CBM) is also one of them which reserved in coalbed. This significant new energy sources has emerge to convert an energy source, hydrogen and hydrogen-driven chemicals. For this CBM, this paper was written to analyze the geological analysis and reserves in Mongolian Tavan Tolgoi CBM coal mine and to examine the application field. This paper is mainly a preliminary feasibility report analyzing the business of Tavan Tolgoi CBM and its exploitable gas.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1062-1067
• /
• 2015

Floating architecture is a type of building that is geographically located on a sea or a river. It floats under the influence of buoyancy, and does not have an engine for moving it. Korea is a peninsula surrounded by sea except on the north side, so floating architectures have been mainly focused on two points: solving the issue of small territory and providing various leisure & cultural spaces. Floating architectures are expected to save energy effectively, if they use sea water heat, which is known to be clean energy with infinite reserves. To use sea water heat as the heat source and/or heat sink, this study proposes a model in which a sea water heat exchanger is embedded in the concrete structure in the lower part of the floating architecture that is submerged under the sea. Based on the results of performance evaluations of the sea water heat exchanger using CFD (computational fluid dynamics) analysis and mock-up experiments under various conditions, it is found out that the temperature difference between the inlet and outlet of the heat exchanger is in the range of $3.06{\sim}9.57^{\circ}C$, and that the quantity of heat transfer measured is in the range of 3,812~7,180 W. The CFD evaluation results shows a difference of 5% with respect to the results of mock-up experiment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.131-133
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cell (DSC) has been very economical and easy method to convert solar energy to electricity. Recently a novel tandem cell structure is proposed to improve photocurrent of DSC. To fabricated a tandem cell, the mesh structure of counter electrode is essential for the improvement in transmittance. In this study, we conducted the experiment to get the characteristic of DSC with mesh counter electrode. Under the standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 3.41% and the transmittance of 72% in the DSC with mesh counter electrode.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권6호
• /
• pp.834-841
• /
• 2019

Objective: This study was conducted to investigate the effects of in ovo feeding (IOF) of creatine pyruvate (CrPyr) on the energy metabolism in thigh muscle of embryos and neonatal broilers. Methods: A total of 960 eggs were randomly assigned to three treatments: i) non-injected control group, ii) saline group injected with 0.6 mL of physiological saline (0.75%), and iii) CrPyr group injected with 0.6 mL of physiologi-cal saline (0.75%) containing 12 mg CrPyr/egg on 17.5 d of incubation. After hatching, 120 male chicks (close to the average body weight of the pooled group) in each group were randomly assigned to eight replications. The feeding experiment lasted 7 days. Results: The results showed that IOF of CrPyr increased glucose concentrations in the thigh muscle of broilers on 2 d after injection (p<0.05). Compared with the control and saline groups, the concentration of creatine in CrPyr group was increased on 2 d after injection and the day of hatch (p<0.05). Moreover, IOF of CrPyr increased the creatine kinase activity at hatch and increased the activities of hexokinase and pyruvate kinase on 2 d after injection and the day of hatch (p<0.05). Chicks in CrPyr group showed higher mRNA expressions of glucose transporter 3 (GLUT3) and GLUT8 on the day of hatch (p<0.05). Conclusion: These results demonstrated that IOF of CrPyr was beneficial to enhance muscle energy reserves of em-bryos and hatchlings.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.115-116
• /
• 2013

Recently environmental problems such as greenhouse gas emissions has become a global problem. As a result, the current that can be easily used to Petroleum and coal reserves of fossil energy and environmental issues, coupled with the limitations of this finding for renewable energy to replace the movement is spreading around the world. Among them Energy Storage System with secondary battery technology has been increased interest in, Redox flow batteries, unlike the conventional theory, the life of the rechargeable battery almost no restrictions existing lithium-ion batteries 10 times more than the life of the road. In this paper, power plant or power system, installed in a building that can cope with the rapid increase in demand for power redox flow battery for 100kW PCS will be introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1279-1280
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes 12${\sim}$24 hours. In this study, we varied the dye coloring temperature from 0$^{\circ}C$ to 60$^{\circ}C$. At the temperature of 40$^{\circ}C$, DSC cell showed the best performance. We also conducted the time variant experiment to reduce the manufacturing time. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}torr$, RF power of 120W and substrate temperature of 100$^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권8호
• /
• pp.1121-1126
• /
• 2000

Daily variation in the serum concentrations of insulin and insulin-like growth factor-I and in the plasma concentrations of thyroxine and triiodothyronine were evaluated in ewes fed 30%, 100% and 200% of theoretical maintenance energy requirements. The single daily meal has had significant effects (p<0.05) on almost all profiles. In general, serum or plasma hormone concentrations have increased after the meal, in particular at the two higher levels of energy intake. In the group submitted to the lowest level of energy intake, the consequences of the meal on circulating levels were almost imperceptible. The effects of feeding levels on serum or plasma concentrations have widely varied among hormones, not showing any objective pattern or relationship. Because these variations may affect the interpretation of these blood indicators, knowledge of daily profiles and of the effect of feed level must be considered. In order to maximize the diagnostic value of those indicators, the most suitable times for blood collection seem to be 16 h after the meal and (or) just before the meal. The collection 16 h after the meal apparently allows the characterization of a relatively steady metabolic state, intermediate between the close effects of food intake and the final phase of the intensification of body reserves mobilization. The collection just before the meal will give a good indication of the level of activity of those mobilization mechanisms.