• Journal of Nutrition and Health
• /
• v.45 no.2
• /
• pp.140-149
• /
• 2012

The purpose of this study was to compare nutrient intake and diet quality of obese women to those of non-obese women, and to investigate the relationship between diet quality and obesity index in females. We analyzed data from the combined 2007-2009 Korean National Health and Nutrition Examination Survey (KNHANES). In this study, according to their BMI (above $25kg/m^2$), we classified the subjects into the obese group (n = 724) and non-obese control group (n = 2,841). Nutrient adequacy ratio (NAR), the number of foods (Dietary Variety Score, DVS), and food groups consumed (Dietary Diversity Score, DDS) were analyzed by using the data from the 24-recall method. The average energy intake of both the obese and control group were 1634.94 kcal and 1,707.81 kcal, respectively (p = 0.0199). The obese group consumed significantly lower quantities of calcium per 1,000 kcal compared to the control group (p = 0.0261). With regards to diet quality, calcium NAR in the obese group was significantly lower than that of the control group (p = 0.0158). MAR values for the obese and the control group was 0.79 and 0.80, respectively and revealed no statistical difference. The obese group showed a significantly lower consumption of milk compared to the control group (p = 0.0162). The average DVS of the obese and control group was 28.63 and 30.41, respectively and revealed a statistical significance (p = 0.0003). DDS in the obese group (3.686) was significantly lower than that of the control group (3.769)(p = 0.0253). DVS showed considerable negative relationships with BMI or waist circumference after it was adjusted for potential confounding factors. In conclusion, obese women had lower calcium intake quality, milk consumption, DVS and DDS than those of the control group. In Korean females, food intake variety did adversely affect obesity index. Further studies are needed to confirm this finding.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.374-380
• /
• 2015

The quality characteristics of the woodpellet manufactured from two domestic pines (Pinus densiflora S. et Z. and Pinus rigida Mill.) were investigated for the efficient energy use of woody biomass resources. Properties of woodpellets such as moisture content, heating value, ash content, apparent density and durability were determined by using the standard test method of woodpellets of Korea Forest Research Institute (KFRI) and elemental analysis. The results of elemental analysis for C, H, O and N showed 61.42% carbon, 5.56% hydrogen, 32.87% oxygen, and 0.15% nitrogen for Pinus densiflora S. et Z. and 61.03% carbon, 5.96% hydrogen, 32.83% oxygen, and 0.18% nitrogen for Pinus rigida Mill. No significant difference between Pinus densiflora S. et Z. and Pinus rigida Mill was observed on elemental analysis. Heating values of each woodpellet were ranged from 19.00 to 19.42 MJ/kg which satisfied the first grade quality standard (${\geq}18.0MJ/kg$) by KFRI. The ash contents of woodpellet were slightly different between Pinus densiflora S. et Z. and Pinus rigida Mill., and satisfied the first grade quality standard (${\leq}0.7%$) by KFRI. Apparent density of woodpellet (Pinus densiflora S. et Z.) was passed the first grade standard level (${\geq}640kg/m^3$), and woodpellets from Pinus rigida Mill. satisfied the second grade quality of the standard. The moisture contents of each woodpellet were satisfied by the first grade quality standard (${\leq}10%$). The durability of woodpellet (Pinus densiflora S. et Z.) was passed the third grade level (${\geq}95%$), but Pinus rigida Mill. woodpellet was insufficient to satisfy the quality standard.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.130-137
• /
• 1999

Background: In cardiac surgery, hypothermia is associated with a number of major disadvantage, including its detrimental effects on enzymatic function, energy generation and cellular integrity. Warm cardioplegia with normothermic cardiopulmonary bypass cause three times more incidence of permanent neurologic deficits than the cold crystalloid cardioplegia with hypothermic cardiopulmonary bypass. Interruptions or inadequate distribution of warm cardioplegia may induce anaerobic metabolism and warm ischemic injury. To avoid these problems, tepid blood cardioplegia was recently introduced. Material and Method: To evaluate whether continuous tepid blood cardioplegia is beneficial in clinical practice during valvular surgery, we studied two groups of patients matched by numbers and clinical characteristics. Warm group(37$^{\circ}C$) consisted of 18 patients who underwent valvular surgery with continuous warm blood cardioplegia. Tepid group(32$^{\circ}C$) consisted of 17 patients who underwent valvular surgery with continuous tepid blood cardioplegia. Result: Heartbeat in 100% of the patients receiving continuous warm blood cardioplegia and 88.2% of the patients receiving continuous tepid blood cardioplegia converted to normal sinus rhythm spontaneously after removal of the aortic cross clamp. There were no differences between these two groups in CPB time, ACC time, the amount of crystalloid cardioplegia used and peak level of potassium. During the operation, the total amount of urine output was more in the warm group than the tepid group(2372${\pm}$243 ml versus 1535${\pm}$130 ml, p<0.01). There were no differences between the two groups in troponin T level measured 1hr and 12hrs after the operation. Conclusion: Continuous tepid blood cardioplegia is as safe and effective as continuous warm blood cardioplegia undergoing cardiac valve surgery in myocardial protection.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.105-120
• /
• 2005

This study was carried out at Reed Marsh of Sihwa Lake from July 2003 to June 2004. We observed total(sum of maximum population) 5,752 individuals of 70 species including 12 species of ducks, 10 species of egrets, 6 species of wagtails and buntings, 4 species of eagles. The most dominant species was Spotbill Duck(Anas poecilorhyncha - 3,518 individuals, 61.16%), and other species were Mallard(Anas platyrhynchos - 540 individuals, 9.39%), Great Reed-Warbler(Acrocephalus arundinaceus - 217 individuals, 3.77%). Reed Marsh of Sihwa Lake were observed many kinds of protected species such as Great Bittern(Botaurus stellaris), Mandarin Duck(Aix galericulata), Chinese Sparrow Hawk (Accipiter soloensis), Eurasian Sparrow Hawk(Accipiter nisus), Japanese Buzzard(Buteo buteo), Hen Harrier(Circus cyaneus), Eurasian Hobby(Falco subbuteo), and Common Kestrel(Falco tinnunculus). Since the Reed Marsh of Sihwa Lake arrived many individuals of waterbird, crop damage by the waterbird occurred in the surrounding rice fields. It was an area adjacent to the reed marsh of sihwa lake such as Yoopori and Samhwari Bibongmyoun, Yamokri Maesongmyoun Hwaseong City. Bird of crop damage was ducks openly. The most species was Spot-billed Duck. Crop damage types by the Spot-billed Duck were grazing, used the grain up or lower in quality with step on the rice. Crop damage size was about 560bags of rice during the one month on August 2002. In 2003, After carrying out the various crop damage reduction countermeasures, which measured crop damage size in 2002's crop damage area. It happened about 152bags of rice during the two months from on August to September 2003. Migration routes of Spot-billed Duck were that it was migrated from up the sihwa lake to reed marsh. It took a rest at reed marsh and migrated the surrounding rice fields for the feeding action. In 2002, it was migrated direct from up the sihwa lake to in surrounding rice fields. But as environment of reed marsh was improved better than 2002, it was migrated to reed marsh because of reducing the energy attrition rate. Crop damage reduction countermeasures are get on ears to use explosion machine, searchlight, start-gun and patrol at regular intervals. Which was an effect short term. Indirect method is to make a feeding area of substitution at up the sihwa lake and reed marsh of sihwa lake.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.107-113
• /
• 2004

This study explored the association between the bone nutrition indicators and the bone mineral density (BMD) in 138 apparently healthy elderly (male: 38, female: 100) dwelling in a low income area of the city. Dietary intakes were estimated from two meals (breakfast ＆ dinner) and snack using 24 hr-recall method and lunch with weighing over 3 consecutive days. Female elderly showed significant lower intakes (p<0.001∼p<0-05) for most of the nutrients except calcium and vitamin C than the elderly male. Calcium and vitamin D intakes for both male and female were 331.0 mg, 1.89 $\mu\textrm{g}$ and 308.6 mg, 1.21 $\mu\textrm{g}$, respectively and they were below the 50% of the RDA. Both the BMDs at lumbar spine (LS) and femoral neck (FN) were positively correlated with the energy intake, calcium intake and vitamin D intake (p<0.05, respectively) for male. In female BMDs of the both sites were positively correlated with the intakes of carbohydrates, protein, lipid, calcium and vitamin D (p<0.01∼p<0.05). Female showed higher serum osteocalcin (p<0.01) and urinary deoxypyridinoline/creatinine (DPYR/CR) (p<0.001), meaning that female had elevated rate in bone turn over and bone resorption. The proportion of subjects with vitamin D deficiency assessed with serum 25(OH)VitD$_3$<10 mg/mL was 35.0% for female and 23.7% for male, respectively Both the BMDs at lumbar spine and trochanter were positively correlated with serum 25(OH)VitD$_3$ but BMDs in most of the sites were negatively associated with urinary DPYR/CR, phosphate/CR. Stepwise multiple regression showed physical activity, serum alkaline phosphatase, weight, vitamin D explained 47.6% of the variation of the LS BMD. The indicator variable for serum alkaline phosphatase was negatively associated with LS BMD. However, the indicator variable for weight and vitamin D intake were positive and significant (p=0.0087, p=0.0007, respectively). For FN BMD, the indicator variable for age and serum alkaline phosphatase were negative and significant (p<0.0075, p<0.0015, respectively) and the weight was positively associated with the FN BMD.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.4
• /
• pp.447-452
• /
• 2007

This study was peformed to estimate manganese intake and the major food source of manganese in Korean adults. The 354 subjects aged over 20 years were measured anthropometrics and dietary intake using 24-hour recall method. Daily intake and the major food sources of manganese were calculated using manganese database of food composition tables in Korea, USA and Japan. The average age, height, weight and BMI were 54.6years, 165.7cm, 67.2kg and $24.5kg/m^2$ for men and 53.8 years, 153.7cm, 59.1kg and $24.9kg/m^2$ for women, respectively. The daily energy and manganese intake of men were significantly higher than those of women (1740.9 kcal vs. 1432.6 kcal; p<0.001, 3.7mg vs. 3.2mg; p<0.01). However, daily manganese intake per 1000kcal between men and women was not significantly different (2.2mg/1000kcal vs. 2.3mg/1000kcal). Daily manganese intakes from each food group were 1.9mg from cereals, 0.5mg from vegetables, 0.4mg from pulses and 0.2mg from seasonings. The 20 major food sources of dietary manganese were rice, soybean, sorghum, Kimchi, tobu, wheat flour, red pepper powder, small red bean, glutinous millet, soybean paste, potato, Ramyeon, green pepper, noodle, buckwheat Naengmyeon, soybean sprout, laver, watermelon, perilla seeds powder and soy sauce. Manganese intake from these 20 foods was 74.0% of the total dietary manganese intake. In conclusion, daily manganese intake of the subject was 3.4mg (2.2mg/1000 kcal) and met adequate intake of manganese. The mai or food sources of manganese were cereals, pulses, and vegetables such as rice, soybean, sorghum, Kimchi and tobu.

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.2
• /
• pp.193-203
• /
• 2015

Objectives : The purpose of this study is to evaluate the clinical effects of ascending kidney water and descending heart fire pharmacopuncture treatment for hot flush and sweating. Methods : Ascending kidney water and descending heart fire pharmacopuncture is achieved by injecting pharmacopuncture on a specific acupoint to change from the state of water-fire disharmony to harmonious state. Hwangryunhaedok-tang (黃連解毒湯) pharmacopuncture is injected on both side Gyeonjeong (GB ₂₁ ), Pungji (GB ₂₀ ). Total 0.4 cc was injected by 0.1 cc each point. BUM (Bear’s gall bladder, ox bezoar and musk) pharmacopuncture is injected on both side Jeonjung (CV ₁₇ ), Jungwan (CV ₁₂ ), Gihae (CV ₆ ). Total 0.15 cc was injected by 0.05 cc each point. Treatment was done daily. The method of evaluation are Hot Flush Score (HFS), VAS and sweating areas. Results : In case 1, after treatment hot flush score was reduced from 24 to 4 points. VAS scale was reduced from 7 to 2. It took about two weeks for the symptoms to decrease by half. Associated symptoms almost did not stay at discharge. In case 2, after treatment hot flush score was reduced from 28 to 2 points. VAS scale was reduced from 10 to 3. And emotional symptoms were reduced about 70%. In case 3, after treatment hot flush score was reduced from 8 to 1 points. VAS scale was reduced from 6 to 1. And headache and chest discomfort symptoms have disappeared. Conclusions : Ascending kidney water and descending heart fire pharmacopuncture treatment is effective for improve ascending kidney water and descending heart fire energy. Therefore, it will be used to alleviate hot flush and sweating.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.199-205
• /
• 1998

Cullet Quality Control in auto glass bottle factory is the most important in recent days because of the increasing cost of materials in glass bottle. Since the composition of plate glass cullet is similar, the cullet quality using plate cullet in glass bottle factory is easily controlled. In addition to this, the price of plate glass cullet is so low that the cost reduction can be achieved. If the ratio of plate glass cullet and gush is over 25%, the liquidity of glass water become worse, which is caused by different compositions and viscosity of the components. As a results, Furnace bottom temperature becomes low and glass water becomes inhomogeneous. Thus production efficiency of glass bottle becomes low because of increasing devitrification in Dead Corner part in glass melting furnace. Three experimental methods – (1) increasing melting temperature, (2) using Booster, (3) using bubbler – were performed to increase the furnace bottom temperature and glass water homogeneity. The amounts of plate glass cullet was able to increase up to 90%, 70% and 60% without any devitrification using booster, bubbler and the method of glass melting temperature increase from $1480^{\circ}C$ to $1560^{\circ}C$ respectively. It is not possible to increase the glass melting temperature without the reduction of furnace operation time and the increase of fuel cost. The booster process has disadvantage of much electric energy consumption. Since the bubbler process uses physical convection of melting glass based on compression air, the homogeneity of molten glass is not so good as that of booster process but it can reduce the cost of glass bottle.